Date: Tue, 28 Sep 2010 22:59:04 +0200 From: Miroslav Lachman <000.fbsd@quip.cz> To: Jeremy Chadwick <freebsd@jdc.parodius.com> Cc: freebsd-stable@freebsd.org Subject: Re: fetch: Non-recoverable resolver failure Message-ID: <4CA25718.2000101@quip.cz> In-Reply-To: <20100928184343.GA70384@icarus.home.lan> References: <4CA22FF0.8060303@quip.cz> <20100928184343.GA70384@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
Jeremy Chadwick wrote: > On Tue, Sep 28, 2010 at 08:12:00PM +0200, Miroslav Lachman wrote: >> Hi, >> >> we are using fetch command from cron to run PHP scripts periodically >> and sometimes cron sends error e-mails like this: >> >> fetch: https://hiden.example.com/cron/fiveminutes: Non-recoverable >> resolver failure [...] >> Note: target domains are hosted on the server it-self and named too. >> >> The system is FreeBSD 7.3-RELEASE-p2 i386 GENERIC >> >> Can somebody help me to diagnose this random fetch+resolver issue? > > The error in question comes from the resolver library returning > EAI_FAIL. This return code can be returned to all sorts of applications > (not just fetch), although how each app handles it may differ. So, > chances are you really do have something going on upstream from you (one > of the nameservers you use might not be available at all times), and it > probably clears very quickly (before you have a chance to > manually/interactively investigate it). The strange thing is that I have only one nameserver listed in resolv.conf and it is the local one! (127.0.0.1) (there were two "remote" nameservers, but I tried to switch to local one to rule out remote nameservers / network problems) > You're probably going to have to set up a combination of scripts that do > tcpdump logging, and ktrace -t+ -i (and probably -a) logging (ex. ktrace > -t+ -i -a -f /var/log/ktrace.fetch.out fetch -qo ...) to find out what's > going on behind the scenes. The irregularity of the problem (re: > "sometimes") warrants such. I'd recommend using something other than > 127.0.0.1 as your resolver if you need to do tcpdump. I will try it... there will be a lot of output as there are many cronjobs and relativelly high traffic on the webserver. But fetch resolver failure occurred only few times a day. > Providing contents of your /etc/resolv.conf, as well as details about > your network configuration on the machine (specifically if any > firewall stacks (pf or ipfw) are in place) would help too. Some folks > might want netstat -m output as well. There is nothing special in the network, the machine is Sun Fire X2100 M2 with bge1 NIC connected to Cisco Linksys switch (100Mbps port) with uplink (1Gbps port) connected to Cisco router with dual 10Gbps connectivity. No firewalls in the path. There are more than 10 other servers in the rack and we have no problems / error messages in logs from other services / daemons related to DNS. # cat /etc/resolv.conf nameserver 127.0.0.1 /# netstat -m 279/861/1140 mbufs in use (current/cache/total) 257/553/810/25600 mbuf clusters in use (current/cache/total/max) 257/313 mbuf+clusters out of packet secondary zone in use (current/cache) 5/306/311/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 603K/2545K/3149K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 13/470/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 3351782 requests for I/O initiated by sendfile 0 calls to protocol drain routines (real IPs were replaced) # ifconfig bge1 bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 00:1e:68:2f:71:ab inet 1.2.3.40 netmask 0xffffff80 broadcast 1.2.3.127 inet 1.2.3.41 netmask 0xffffffff broadcast 1.2.3.41 inet 1.2.3.42 netmask 0xffffffff broadcast 1.2.3.42 media: Ethernet autoselect (100baseTX <full-duplex>) status: active NIC is: bge1@pci0:6:4:1: class=0x020000 card=0x534c108e chip=0x167814e4 rev=0xa3 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5715C 10/100/100 PCIe Ethernet Controller' class = network subclass = ethernet There is PF with some basic rules, mostly blocking incomming packets, allowing all outgoing and scrubbing: scrub in on bge1 all fragment reassemble scrub out on bge1 all no-df random-id min-ttl 24 max-mss 1492 fragment reassemble pass out on bge1 inet proto udp all keep state pass out on bge1 inet proto tcp from 1.2.3.40 to any flags S/SA modulate state pass out on bge1 inet proto tcp from 1.2.3.41 to any flags S/SA modulate state pass out on bge1 inet proto tcp from 1.2.3.42 to any flags S/SA modulate state modified PF options: set timeout { frag 15, interval 5 } set limit { frags 2500, states 5000 } set optimization aggressive set block-policy drop set loginterface bge1 # Let loopback and internal interface traffic flow without restrictions set skip on lo0 Thank you for your suggestions Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4CA25718.2000101>