Date: Sun, 10 Sep 95 12:21:51 EDT From: jleppek@suw2k.ess.harris.com (James Leppek) To: freebsd-current@freefall.FreeBSD.org Subject: Re: Sig 11 and -current problems. Message-ID: <9509101621.AA01547@borg.ess.harris.com>
next in thread | raw e-mail | index | archive | help
I do not think there is a "one pass" solution for the current problem. I am also a little puzzled as to how the VM changes(if they are at fault) can cause such pervasive problems??? I would have thought they would be isolated inside the kernel and outside of most of the binaries... after the procedure I mentioned before my build is still running... I sure miss my 32meg machine, I didn't have to wait nearly as long. I had a motherboard go bad and could not get an 8 slot 30pin SIMM replacement they only had a 4 30pin +2 72pin SIMM board, boy do I feel the difference when I am waiting for a world build instead of sleeping thru one :-) I also have 5 spare 4meg SIMMS sitting on the shelf :-( Hmmm, guess I am rambling a bit, sorry up late watching worlds go by.... Jim Leppek > From owner-freebsd-current@freefall.freebsd.org Sun Sep 10 11:53:33 1995 > From: John Hay <jhay@mikom.csir.co.za> > Subject: Re: Sig 11 and -current problems. > To: gibbs@freefall.freebsd.org (Justin T. Gibbs) > Date: Sun, 10 Sep 1995 17:38:07 +0200 (SAT) > Cc: FreeBSD-current@FreeBSD.ORG > X-Mailer: ELM [version 2.4 PL23] > Mime-Version: 1.0 > Content-Type> : > text/plain> ; > charset=US-ASCII> > Content-Transfer-Encoding: 7bit > Sender: current-owner@FreeBSD.ORG > > Yes I did a make clean and then a make all and then a make install in the > lkm directory. It did not help. > > > > > > Have you explicitly rebuilt and installed your LKMs? > > > > >Well I haven't got rid of al the sig 11s yet. :( The only way at the moment > > >for me is to run with a kernel that I compiled on 3 Sept. > > > > ... > > > > >-- > > >John Hay -- John.Hay@csir.co.za > > > > -- > > Justin T. Gibbs > > =========================================== > > Software Developer - Walnut Creek CDROM > > FreeBSD: Turning PCs into workstations > > =========================================== > > > > -- > John Hay -- John.Hay@csir.co.za >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9509101621.AA01547>