Date: Fri, 8 Apr 2016 14:40:05 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: =?UTF-8?B?T3RhY8OtbGlv?= <otacilio.neto@bsd.com.br> Cc: freebsd-current <freebsd-current@freebsd.org>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: WIFI urtwn possibly broken on 297561 Message-ID: <CAJ-Vmo=9SiYuiTMxrhrz-k6EM7EWcy%2BpYphn4cDXSq3O4Y4fzA@mail.gmail.com> In-Reply-To: <570819D7.3040206@bsd.com.br> References: <57080811.5030405@bsd.com.br> <CAJ-VmokkpVYfceLOUpR44EP=v_dywpf=nC2DVUCU5ZtkE=20Ag@mail.gmail.com> <570812A5.1050600@bsd.com.br> <CAJ-Vmon2x2CooDGipDiimveRd_CSL5MgRJEHSNjh7CAkeyEezw@mail.gmail.com> <570819D7.3040206@bsd.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
ok, try "ifconfig wlan0 -ht" before starting wpa_supplicant and see if that makes it any better. You should also include IEEE80211_AMPDU_AGE in your config file if you haven't yet. Also, include IEEE80211_DEBUG in there too, and try "wlandebug +rate +ht" ? -adrian On 8 April 2016 at 13:51, Otac=C3=ADlio <otacilio.neto@bsd.com.br> wrote: > Em 08/04/2016 17:34, Adrian Chadd escreveu: >> >> Hi, >> >> Not '--ff', just '-ff' and '-amsdu' >> >> It's possible that one or the other of those options are a problem. I >> added those features recently to urtwn. >> >> Can you please do 'ifconfig -v wlan0 list sta' and 'ifconfig -v wlan0' ? >> >> Thanks, >> >> >> >> -adrian > > > Sorry, I type wrong but use the commands correctly :-) > > Its my rc.conf > > hostname=3D"beaglebone" > ifconfig_cpsw0=3D"DHCP" > sshd_enable=3D"YES" > > # Nice if you have a network, else annoying. > #ntpd_enable=3D"YES" > ntpd_sync_on_start=3D"YES" > > # Uncomment to disable common services (more memory) > #cron_enable=3D"NO" > #syslogd_enable=3D"NO" > > sendmail_submit_enable=3D"NO" > sendmail_outbound_enable=3D"NO" > sendmail_msp_queue_enable=3D"NO" > # On first boot, enlarge the root filesystem to fill the SD card > growfs_enable=3D"YES" > > wlans_urtwn0=3D"wlan0" > ifconfig_wlan0=3D"WPA SYNCDHCP -amsdu" > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D > > And the commands that you request: > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > > root@beaglebone:/usr/home/ota # ifconfig -v wlan0 list sta > ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG > 58:23:8c:c6:e1:aa 5 11 144M 14.5 0 5 19408 EP AQEHTR > SSID<Diana> RATES<B2,B4,B11,B22,36,48,72,108> DSPARMS<11> TIM<05040001000= 0> > ERP<0x4> ???<2f0104> RSN<v1 mc:TKIP uc:AES-CCMP+TKIP km:8021X-PSK> > XRATES<12,18,24,96> HTCAP<cap 0x18bc param 0x1b mcsset[0-15] extcap 0x0 t= xbf > 0x0 antenna 0x0> HTINFO<ctl 11, 8,15,0,0 basicmcs[]> WPS<v:1.0 st:C> > VEN<dd090010180204000c0000> WPA<v1 mc:TKIP uc:AES-CCMP+TKIP km:8021X-PSK> > WME<qosinfo 0x88 BE[aifsn 3 cwmin 4 cwmax 10 txop 0] BK[aifsn 7 cwmin 4 > cwmax 10 txop 0] VO[aifsn 2 cwmin 3 cwmax 4 txop 94] VI[aifsn 2 cwmin 2 > cwmax 3 txop 47]> > root@beaglebone:/usr/home/ota # ifconfig -v wlan0 > wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 > ether 14:cc:20:12:ee:55 > inet 192.168.0.25 netmask 0xffffff00 broadcast 192.168.0.255 > groups: wlan > ssid Diana channel 11 (2462 MHz 11g ht/20) bssid 58:23:8c:c6:e1:a= a > regdomain 0 country US anywhere -ecm authmode WPA2/802.11i -wps -= tsn > privacy ON deftxkey UNDEF > TKIP 2:128-bit powersavemode OFF powersavesleep 100 txpower 0 > txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7 > 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6 > 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6 > half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6 > quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 > roam:11a rssi 7dBm rate 12 Mb/s > roam:11b rssi 7dBm rate 1 Mb/s > roam:11g rssi 7dBm rate 5 Mb/s > roam:turboA rssi 7dBm rate 12 Mb/s > roam:turboG rssi 7dBm rate 12 Mb/s > roam:sturbo rssi 7dBm rate 12 Mb/s > roam:11na rssi 7dBm MCS 1 > roam:11ng rssi 7dBm MCS 1 > roam:half rssi 7dBm rate 6 Mb/s > roam:quarter rssi 7dBm rate 3 Mb/s > -pureg protmode CTS ht20 htcompat ampdu ampdulimit 64k ampdudensi= ty > 8 > -amsdu -shortgi htprotmode RTSCTS -puren -smps -rifs wme -burst > -dwds > roaming MANUAL bintval 100 > AC_BE cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm ack > cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm > AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack > cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm > AC_VI cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm ack > cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm > AC_VO cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm ack > cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm > media: IEEE 802.11 Wireless Ethernet MCS mode 11ng > status: associated > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > > If you need more test I can do. Send me the requests and I will response > tomorrow. > > > Thanks a lot! > > []'s > -Otac=C3=ADlio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=9SiYuiTMxrhrz-k6EM7EWcy%2BpYphn4cDXSq3O4Y4fzA>