Date: Sat, 13 Nov 2004 19:42:04 +0300 From: shmil@onego.ru To: freebsd-questions@freebsd.org Subject: vidcontrol don't work Message-ID: <1100364124.4196395c4bb28@new-webmail.onego.ru> In-Reply-To: <20041113120104.EE8F316A4F4@hub.freebsd.org> References: <20041113120104.EE8F316A4F4@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello all.
vidcontrol -g 132x25 VESA_132x25 don't work.
When I run this command, computer is rebooting.
Motherboard Intel
Video GeForce 4 ti 4200
dmesg:
FreeBSD 5.2-RELEASE #19: Thu Nov 11 23:17:43 GMT 2004
root@vm.WORKGROUP:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc080e000.
MPTable: < BrkdlPE-ICH4>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2399.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536084480 (511 MB)
avail memory = 511078400 (487 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc076fa22 (1000022)
VESA: NVIDIA
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f47e0
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0
on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <Intel ICH4 UDMA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
What is go on.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1100364124.4196395c4bb28>