Date: Tue, 04 Mar 1997 14:00:39 +0000 From: eTienne de bruin <et@oskar.nanoteq.co.za> To: smpatel@freebsd.org Cc: hackers@freebsd.org Subject: PlugNplay SoundCard Message-ID: <199703041400.OAA00322@pc_et.nanoteq.co.za>
index | next in thread | raw e-mail
Greets,
I am using Sujal's pnp patch to try and get my soundcard going.
It's a Pro-Multimedia SB Compat Plug and Play.
I have the card programmed to IRQ 9 and PORT 240. But it still
won't work... I will give u all the details in the hope that u
can tell me where the problem is:
1. Output of pnpinfo
2. Kernel config file
3. dmesg
PS: Apologies for the long e-mail.
eT
Output of pnpinfo:
Checking for Plug-n-Play devices...
Trying Read_Port at 203
Card assigned CSN #1
Board Vendor ID: OPT0931
Board Serial Number: 08000000
PnP Version: 1.0
Vendor Version: 0
Device Description: OPTi Audio 16
Logical Device ID: PNP0600 (0006d041)
Vendor register funcs 00
Device Description: CD
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x376
I/O Range maximum address: 0x3f6
I/O alignment for minimum: 16
I/O length: 2
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x170
I/O Range maximum address: 0x3f0
I/O alignment for minimum: 16
I/O length: 8
IRQ: 15
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x376
I/O Range maximum address: 0x3f6
I/O alignment for minimum: 16
I/O length: 2
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x170
I/O Range maximum address: 0x3f0
I/O alignment for minimum: 16
I/O length: 8
IRQ: 5 7 8 9 10 11 15
End Dependent Function
Logical Device ID: OPT9310 (1093143e)
Vendor register funcs 00
Device Description: OPTiAudio 16
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x534
I/O Range maximum address: 0x534
I/O alignment for minimum: 16
I/O length: 4
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x388
I/O Range maximum address: 0x388
I/O alignment for minimum: 16
I/O length: 4
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x220
I/O Range maximum address: 0x220
I/O alignment for minimum: 16
I/O length: 16
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0xe0c
I/O Range maximum address: 0xffc
I/O alignment for minimum: 16
I/O length: 4
IRQ: 5 7 8 9 10 11
DMA: 0 1 3
DMA: 8-bit only
DMA: Device is not a bus master
DMA: May not execute in count by byte mode
DMA: May not execute in count by word mode
DMA: Compatibility mode
DMA: 0 1 3
DMA: 8-bit only
DMA: Device is not a bus master
DMA: May not execute in count by byte mode
DMA: May not execute in count by word mode
DMA: Compatibility mode
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x534
I/O Range maximum address: 0xff0
I/O alignment for minimum: 4
I/O length: 4
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x380
I/O Range maximum address: 0x3f0
I/O alignment for minimum: 16
I/O length: 12
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x220
I/O Range maximum address: 0x3e0
I/O alignment for minimum: 32
I/O length: 16
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0xe0c
I/O Range maximum address: 0xffc
I/O alignment for minimum: 16
I/O length: 4
IRQ: 3 4 5 7 8 9 10 11 15
DMA: 0 1 3 5 6
DMA: 8-bit only
DMA: Device is not a bus master
DMA: May not execute in count by byte mode
DMA: May not execute in count by word mode
DMA: Compatibility mode
DMA: 0 1 3 5 6
DMA: 8-bit only
DMA: Device is not a bus master
DMA: May not execute in count by byte mode
DMA: May not execute in count by word mode
DMA: Compatibility mode
End Dependent Function
Logical Device ID: PNPb02f (2fb0d041)
Vendor register funcs 00
Device Description: Game Port
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x201
I/O Range maximum address: 0x3f1
I/O alignment for minimum: 16
I/O length: 1
Logical Device ID: OPT0002 (0200143e)
Vendor register funcs 00
Device Description: MPU401
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x300
I/O Range maximum address: 0x360
I/O alignment for minimum: 16
I/O length: 2
IRQ: 5 7 8 9 10 11
Logical Device ID: PNP0500 (0005d041)
Vendor register funcs 00
Device Description: Modem
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x2e8
I/O Range maximum address: 0x2f8
I/O alignment for minimum: 16
I/O length: 8
IRQ: 3 4 5 7 8 9 10 11
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x3e8
I/O Range maximum address: 0x3f8
I/O alignment for minimum: 16
I/O length: 8
IRQ: 3 4 5 7 8 9 10 11
Start Dependent Function
Device decodes the full 16-bit ISA address
I/O Range maximum address: 0x100
I/O Range maximum address: 0x3f0
I/O alignment for minimum: 16
I/O length: 8
IRQ: 3 4 5 7 8 9 10 11
End Dependent Function
Logical Device ID: OPT9315 (1593143e)
Vendor register funcs 00
Device Description: OPT931
Start Dependent Function
Start Dependent Function
IRQ: 5 10 11
End Dependent Function
End Tag
My Kernel Config file:
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.18 1996/07/16 08:53:04 davidg Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident GENERIC
maxusers 10
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on wd0
controller isa0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
controller pnp0
options "SBC_IRQ=9" #PAS-16. Must match irq on sb0 line.
controller snd0
device sb0 at isa? port 0x240 irq 9 conflicts drq 1 vector sbintr
#device sbxvi0 at isa? drq 5
#device sbmidi0 at isa? port 0x330
options ATAPI #Enable ATAPI support for IDE bus
device wcd0 #IDE CD-ROM
controller ncr0
controller ahb0
controller ahc0
controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
controller matcd0 at isa? port 0x230 bio
device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
#options XSERVER # include code for XFree86
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Laptop support (see LINT for more options)
#
#device apm0 at isa? # Advanced Power Management
#options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device fxp0
device vx0
device ed0 at isa? port 0x300 net irq 11 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector
ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
dmesg output:
FreeBSD 2.1.5-RELEASE #0: Tue Mar 4 13:01:35 1997
et@pc_et.nanoteq.co.za:/usr/src/sys/compile/PC_ET
CPU: 120-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping=6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 14565376 (14224K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 3 on pci0:0
chip1 <Intel 82371 PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1
vga0 <VGA-compatible display device> rev 84 int a irq 12 on pci0:10
Checking for Plug-n-Play devices...
Board Vendor ID: OPT0931 Board Serial Number: 08000000
Configuring (Logical Device 0)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 11 on isa
ed0: address 00:80:c8:1e:e9:f6, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
mse0 not found at 0x23c
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Conner Peripherals 1275MB - CFS1276A>
wd0: 1221MB (2501856 sectors), 2482 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <ACER CD-787E/SAS/V12A>, removable, intr, iordy
atapi0.1: unknown phase
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not probed due to I/O address conflict with ed0 at 0x300
mcd0 not probed due to I/O address conflict with ed0 at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0 not found at 0x360
ep0 not probed due to I/O address conflict with ed0 at 0x300
ix0 not probed due to I/O address conflict with ed0 at 0x300
le0 not probed due to I/O address conflict with ed0 at 0x300
lnc0 not found at 0x280
ze0 not probed due to I/O address conflict with ed0 at 0x300
zp0 not probed due to I/O address conflict with ed0 at 0x300
sb0 not found at 0x240
npx0 on motherboard
npx0: INT 16 interface
--
Etienne de Bruin, Nanoteq (Pty) Ltd, Proudly South African.
Network Security, UNIX, FreeBSD, Sys Admin, Programming, C.
http://www.nanoteq.com/
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703041400.OAA00322>