Date: Thu, 9 Oct 2014 02:12:08 +0200 From: Stephen Riehm <freebsd@opensauce.de> To: Waitman Gobble <gobble.wa@gmail.com> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>, David Benfell <benfell@parts-unknown.org> Subject: Re: How do I tell which driver I need for sound? Message-ID: <19E5161B-5154-48DB-80F6-5E24B2DFB28B@opensauce.de> In-Reply-To: <CAFuo_fynO4myz%2B4cQOmbZHCocqG3Qi=aXO3ogZAG95fw3hveRQ@mail.gmail.com> References: <20141008204214.GA93107@home.parts-unknown.org> <alpine.BSF.2.11.1410081539500.5159@wonkity.com> <20141008220048.GB39434@home.parts-unknown.org> <alpine.BSF.2.11.1410081705520.28307@wonkity.com> <FB860D1F-AF22-479F-A166-A296F9359571@opensauce.de> <CAFuo_fynO4myz%2B4cQOmbZHCocqG3Qi=aXO3ogZAG95fw3hveRQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the tip, but sadly, no dice :-(
I just discovered another post which mentioned "dmidecode" - looking =
through that I see:
On Board Device 3 Information
Type: Sound
Status: Disabled
Description: Realtek High Definition Audio Device
...
Onboard Device
Reference Designation: AUDIO1
Type: Sound
Status: Disabled
Type Instance: 1
Bus Address: 0000:00:1b.0
so by the looks of it, the device(s) are disabled in the BIOS (which I =
sadly can't access due to a BIOS bug).
Thanks anyway,
Steve
On 09 Oct 2014, at 01:54, Waitman Gobble <gobble.wa@gmail.com> wrote:
> Try ports/audio/oss - it's a much newer version than oss in base. Many =
more features, and there's an x mixer that's really great. Caveat - =
might not use the drivers in ports/audio/oss if you have any sort of usb =
sound device (microphone, speakers, etc.) Last time I experimented with =
it would cause bad things to happen. (You can use the mixer and ossinfo =
tool without using the drivers in the port., eg. ossxmix and ossinfo)
>=20
> Waitman
>=20
>=20
>=20
> On Wed, Oct 8, 2014 at 4:28 PM, Stephen Riehm <freebsd@opensauce.de> =
wrote:
> Hi,
>=20
> I'm also a bit lost with this. (Yes I've also read the sound-setup =
handbook)
> My /boot/loader.conf consists of:
>=20
> autoboot_delay=3D"2"
> zfs_load=3D"YES"
> sound_load=3D"YES" # Digital sound subsystem
> snd_hda_load=3D"YES" # Intel High Definition Audio =
(Controller)
> snd_driver_load=3D"YES" # All sound drivers
>=20
> and even after multiple reboots, cat /dev/sndstat reports:
>=20
> root:~ # cat /dev/sndstat
> Installed devices:
> root:~ #
>=20
> and:
>=20
> root:/boot # kldstat
> Id Refs Address Size Name
> 1 94 0xffffffff80200000 1618b88 kernel
> 2 1 0xffffffff81819000 24d888 zfs.ko
> 3 2 0xffffffff81a67000 6658 opensolaris.ko
> 4 1 0xffffffff81a6e000 3fe8 snd_driver.ko
> 5 2 0xffffffff81a72000 89c0 snd_vibes.ko
> 6 2 0xffffffff81a7b000 7918 snd_via82c686.ko
> 7 2 0xffffffff81a83000 83d0 snd_t4dwave.ko
> 8 4 0xffffffff81a8c000 2850 snd_spicds.ko
> 9 2 0xffffffff81a8f000 a788 snd_solo.ko
> 10 5 0xffffffff81a9a000 60c8 snd_sbc.ko
> 11 2 0xffffffff81aa1000 80d0 snd_sb8.ko
> 12 2 0xffffffff81aaa000 8120 snd_sb16.ko
> 13 2 0xffffffff81ab3000 14e88 snd_neomagic.ko
> 14 3 0xffffffff81ac8000 16850 snd_mss.ko
> 15 2 0xffffffff81adf000 e7d0 snd_maestro3.ko
> 16 2 0xffffffff81aee000 d598 snd_maestro.ko
> 17 2 0xffffffff81afc000 7268 snd_fm801.ko
> 18 2 0xffffffff81b04000 a8b0 snd_ess.ko
> 19 2 0xffffffff81b0f000 c9b8 snd_envy24ht.ko
> 20 2 0xffffffff81b1c000 dfd0 snd_envy24.ko
> 21 2 0xffffffff81b2a000 fdf8 snd_ds1.ko
> 22 2 0xffffffff81b3a000 82b0 snd_cs4281.ko
> 23 2 0xffffffff81b43000 a308 snd_atiixp.ko
> 24 2 0xffffffff81b4e000 8ee8 snd_als4000.ko
> 25 2 0xffffffff81b57000 b880 snd_ad1816.ko
>=20
> (no snd_hda in there?)
>=20
> I'm running 10.0 STABLE on an Intel NUC D54250WYK (amd64)
>=20
> Thanks for any insights!
>=20
> Steve
>=20
> On 09 Oct 2014, at 01:07, Warren Block <wblock@wonkity.com> wrote:
>=20
> > On Wed, 8 Oct 2014, David Benfell wrote:
> >
> >> On Wed, Oct 08, 2014 at 03:39:57PM -0600, Warren Block wrote:
> >>> On Wed, 8 Oct 2014, David Benfell wrote:
> >>>
> >>>> For some reason, sound has stopped working and I assume I should
> >>>> reload the driver. But which one?
> >>>
> >>> =
https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sound-setup.htm=
l
> >>
> >> Been there. There is no obvious match between the hardware I have =
and
> >> the kernel modules I have available.
> >
> > The important part is
> > cat /dev/sndstat
> >
> > But for most motherboards, adding
> > snd_hda_load=3D"YES"
> >
> > to /boot/loader.conf is enough.
> > _______________________________________________
> > freebsd-questions@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to =
"freebsd-questions-unsubscribe@freebsd.org"
>=20
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to =
"freebsd-questions-unsubscribe@freebsd.org"
>=20
>=20
>=20
> --=20
> Waitman Gobble
> San Jose California USA
> 510-830-7975
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19E5161B-5154-48DB-80F6-5E24B2DFB28B>