Date: Fri, 8 Aug 2003 15:20:06 +0200 From: "Cornelius, Peter" <peter.cornelius@comsoft.de> To: "Andreas Kohn" <andreas.kohn@gmx.net> Cc: pcc@gmx.net Subject: Re: cbb: Unable to map IRQ on 5.0R (was: Re: Support forO2MicroCard Bridges?) Message-ID: <C48210CFAE2943478BB0ADA41A9FA273327972@cspop.cs-nt-domaene.de>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi Andreas, re list, I have found that when I switch ACPI off entirely, the card is recognised properly and all is well. At least, so it seems. I might even re-attempt the binary upgrade to 5.1-Release which failed so miserably before. This settles that I will keep the card and thus will have more time to play with it. Thank you very much to all involved. Attached come /boot/loader.conf and the corresponding dmesg as they are now. All the best regards, Peter. > -----Ursprüngliche Nachricht----- > Von: Cornelius, Peter > Gesendet: Freitag, 8. August 2003 14:17 > An: Andreas Kohn > Cc: FreeBSD Mobile Mailing List; pcc@gmx.net > Betreff: Re: cbb: Unable to map IRQ on 5.0R (was: Re: Support > forO2MicroCard Bridges?) > > > Re... > > Thanks a lot for the reply. > > > > > [...] > > > > cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> at > > device 8.0 on pci0 > > > > cardbus0: <CardBus bus> on cbb0 > > > > pccard0: <16-bit PCCard bus> on cbb0 > > > > pcib0: _PRS resource entry has unsupported type 2 > > I had the same error. Try to fix this first, perhaps the other error > > will vanish magically. > > > > > > cbb: Unable to map IRQ... > > > > device_probe_and_attach: cbb0 attach returned 12 > > > > [...] > > > > > > Search in your DSDT for _PRS methods and look for errors. > For example, > > view my DSDT at http://andreas.syndrom23.de/freebsd.html#acpi > > > > I described my "solution" in this message > > http://home.jp.freebsd.org/cgi-bin/showmail/acpi-jp/2559 > > ACPI is a little shaky indeed on that box and several things > don't work (properly) like closing the lid, shutdown -p, and > others. I have not paid too much attention to it where I > possibly should have. > > Now, I poked about and found that there's an amldb(8) to play > with but I assume that I would have to produce 'my own' aml > file first from my BIOS information and then incorporate the > changes you propose, or am I wrong? I can get 'something' (in > asl) with acpidump(8) but, well. Then I noted that you load > your .asl files from /boot/kernel... I don't have these -- > yet, obviously :) > > Where should I look; how do I learn this? > > Thanks again and > > all the best, > > Peter. > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to > "freebsd-mobile-unsubscribe@freebsd.org" > [-- Attachment #2 --] \^D\^H\^B \^A\^H\^H@@\^D \^B\^D\^A\M^@\^H\^H\M^@\^H\^P\^H\^D D\^P\^A\^P\^A@\^D\^H\^H\^P\^B \^H\^P\^D\^A\^A\^P\^Q\M^@\^H\^A\^A\^P\^H\M^@\^P\^D\M-@\^P \^A\^A\^P\^P\^H\^A\^H\M^@ \M^@\^P\^D\^A\^P\^D\^H@\^H \M^@\^D \^P@\^D\^P \^H \M^@@\M^@\^D@\^H\^P\^H\^B\^B \^H\^A\M^@\^H\M^@\^B@ \^P\M^@\^D\^P \^D\M^@ \^P\^X@F\M^@\^D\^A\^D\M^H\^D \^B \^H\^D\^H\^H \M^@\^H\M^@\^P \M^@\^A@\^H\M^@\^A\^H \^B\^P\^D\^A\^H\M^@\^A\^H \M^@\^B\^P\^D\^H\M^P\^P\^D\^D"\^D\^D0\M^H\M^@\^D\^H\M^@@\^H\^PP\^B\^H\^H\^P\^D\^B\^H\M^@\^A \^H\M^H\^P\M^@\^A\M^A\^A@ \^H\^P@\M^@\^D\^H\M^@ \^B\^A@\^P\^D \^B\^B@\M^@\M^@@\^A\M^@\^D\^A@\^D@\^H\^H@@ \^C\^A\^HA \^B$@\^P\^C\^A\^B\^B\^D\M^@\^D\^B\^B\^H\M^@\^A\M^P \M^@@\^P@\^B@ \^D\^B\M^@@\^H\M^P\^A@\M^@\^D\M^@\^H\^D\^P\M^@@\^H\^B\^A\M^@\^P\^DCopyright (c) 1992-2003 Th\M-e FreeBSD Project. CopyrIght (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1996, 1993, 1994 The Regents of the UniversiDy of California. All rights reserved.*FreeBSD 5.0-RELEASE #0: Thu Jal 16 22:16:53 GMT 2003 poot@hollin.btc.adaptec.com:/usr/Obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0>96000. Praloaded elf module b/boot+kernel/snl_via82c686.ko"!at 0xs06960a8. Pseloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc169615c. Preloaded dlf modul\M-e "/b\M-oot/kernel/acpi.ko" at 0xc0696208. @imecounter "i8254" frequency 1!93182 H\M-{ Timecounter "TSC" frequency 1200050768 Hz CPU: mobile AMD Athlon(tm) 4 Processor (1200.05-MHz 686-class CPQ) Origi. = "AuthenticAMD" Id = 0x662 Steppi.g"= 2 Featur%s=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Featurer=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> real0memory = 513250944 (479 MB) avail memor9 = 481796096 (459 MB) I\M-nitializing GEOMetry subsystem Pejtium Pro OTRR support enabled npx0: <math processor> on motherboard npx0: InT 16 inderface ac\M-pi0: <AMIINT VI\M-A_K7 > on motherboard ACPI-0625: *"* Inf\^?: GPE Block0 dufined as GPE0 to GPE15\^HU3ing $PIR tab\M-le, 5 entries at\2400xc00f81a0 acpi0: powe2 button is Handled as a fix%d feature pr\M-ogramming model. TimecoUnter "ACPI-fast" "frequency 35'954\M-5 Hz acpi_timer0: <24-bit timer at 3.579545MHz>"port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_4z02 <thermal zone> on acpi0 acpi_buTton0: <Power Bqtton> on$qcpi0 pcib0: <ACPI Host-PCI(bridge> port 0xsf8-0xcfF On acpi0 pci0: <ACPI PCI bus>on pcib0 agp0: <VIA 82C8363 (Apollo KT133A) host to P\^CI bridge> mem 0xe0008000-0xe3fffffn at device 0.00on pci0 pcib1: <PCI-PCI bridge> at dgvice 1.0 on pci0 pci1: <PCI bus> on pcib1 \M-pci1: <display, VGA> it dEvice 0.0 (no driver attached) cbb0: <O2Micro$OZ691\^R/6972 PCI\M--Card\^Bus Bridge> at device 8.0 on pCa0 cardbus0: <C!rdBus bus> on cbb0 pccasd0: >16\^Lbi4 PCCurd bus> on cbb0\^Zpcib0: _PRQ resource entry has unsupported type 2 cbb: Unable to map0IRQ... device_pro`E_and_attach:\240cbb0 attach ret}rned 12 pci0: <seri`l buw, FireWire> at device 16.0 no driver attached) i{ab0: <PCI%I\^SA bridge> at device 17.0 on pci0\^Hisa0: <ISAbus> on isab0 atap#i0: <VIA 8231 ATA100$controller> port 0xfc00-0xfc0f at devica 17.1 on pci0 atapci0: Correctifg VIA config for southbridge dapa corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170irq 15 on atapbi0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 17n" on pci0 usb0: <VAA 83C572 USB controller>$on uhci0 usb0: USB \M-revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 17.3 on pci0 usb1: <VIA 83C572 ]SB controller> on uhci1 usb1: USB sevision 1.0 uhub1: VIA UHCI root hub, class 9/1, rev 1.00/1.00, addr 1 uhub1:"2 ports witx 2 remova"le, self powered pci0:`<bridge, PCI-unknown> at device 17.4 (no driver attached) pcm0\M-: <VIA VT82C686A> port pxdc00-0xdc03,0xe000-0xe003,0xe400-0xe4ff irq 10 at device 17.5 on pci0 pcm0: <simple cgmms> at!device 17.6 (no drivdr attachmd)\^Zvr0: <VIA vT6102 Rhine II 10/100BaseTX. port 0xd000-0xd0ff meo 0xdffff700-1xdffff7ff irq 9 at ee\^Vice 18.0 on pci0 vr0: Ethernet addresc: 00:a0:cc:cb:92:5f miibus0: <MI bus> on vr0 ekphy\M-0: <Generic IEEE 802/3u medi` interface> on miibus0 ukphy0: 10baseT, 10baseT-F\M-DX, 100baseTX, 100baseTX-FDX, auto acpi_lid0: <Control Method Lid Switch> on acpi0 acpiObutton1: <sleep Button\^^ on acpi0 acpi_cmbat0: <Control method Batdery> on acpi0 acpi_acad0: <AC adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on !cpi0 atkbd0:!<AD Keyboard> flags 0x1 irq 1 on a4kbdc\^P kbd0 at atkbd0 psm0: <TQ/2 Mmtse> irq 12 nn atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller"(i82877, NE72065 or clone)> port 0x3f7,0x3f2-0x;f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <5440-KB 3.5" drive> gn fdc0 drive 0 sio0 port 0x3f8-0p3ff irq 4(on acpi0 sio0: tyPe 16550A ppc0 pord 0x778-0x?7b,0x378-0x37f irq 7 drq 3 on qcpi0 ppc0: SMC-like chhpaet (ECP/EPT/PS2/LIBBLE) in CO\^MPATIBLE mode ppc0: FIFO with 16/16/8 b}tes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Pri~ter> on ppbus0 lpt2: Interrupt-dvi\M-ven pmrt ppi0: <Parallel I/O> on ppbus0 acpi_ec0: <%mbedded controller> port 0x66,0x62 on acpi0 orm0: <Opti\^?n ROM> at iomem 0xc0000-0xcbfff on isa0 pmtiler0 on isa0 sa0: <Sy\M-stem console> at flags 0x100 on isa0 sc0: VGA <1\M-6 virteal cons\M-o\M-les, flag3=0x304>\M^Jsio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not b% enabled vga0: <G\M-eneric ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0\^NTimecounters tick every 10.000 msec acpi_cpu: CPU txrottling enabled, 16 steps from 100% to 6.2% ad0: 28615MB <TOSHIBA MK2017GAP> [58140/16/63]\240at ata0-master \M-UDMA100 acd0: CD-RW <TORiSAN DVD-ROM DRWU88824> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s4a vr0: Using force requt command. cc:cb:92:5f 4118> font8x8 4118>. 86>pid 5180(nwserv), uid 0:"exited on siwnal 11 (core dumped) pad 1988 *amldb), uid 1000: exitedon signal 6 |q18>Aug 8 14:58:02 walkabkut klm[596]: Abnormal help%r termination, code 0, signal\24010 4118>Stopping inetd. pid 2094 (nwserv), qid 0: exited on shgnal 11 (core dumped) ,11\M-8>Shut\M-ting down local daemons: Wai|ing (max 60 {econds) for syste}(proc%ss `vnlru' tg stop...stopped Waiting (max 60 seconds) for s9stem procgss `bufdaemon' to stop...stoppe\M-d Waiting (max 60 seconds) for system prOcess `syncer' to stop...stopped syncing disks, bufbers remainine... 9 9 9 1 1 done Uptime: 4h57m57s Terminate ABPI Rebooting... Copyright (c) 19)2-20\M-0\M-3 The FreeBSD Psoject. Copyright (c) 1979, 1980, 1983, 1986, 1988,`1989, 1991, 1\M-992\M-, 1993, 1994 The Regents of \M-the University of Califnrnia. All$rights resesved. FreeBSD 5,0-RE\\EASE #0: Thu(Jan$1\M-6 22:16:53 GMT 2003 root@hollan.btc.adaptec\M-.kom:\^Ousr/obj/usr/src/sys/G\M-E^ERIC\^^Praloaded elf kerfel "/boot/kernel/kernel"0at 0xc0696 00. Preloaded elf module "/boot/kernel/snd_via82c686\M-.ko" at 0xc069\M-60a8.\^NPreloAded elf module "/boot/kmrnel/snd_pcm.ko" at \^Pxc069615c. PrelOaded elf module "/boot/kernel/acpi.ko" at 0xc06\^Y6208& Timecounter "i8254" fvequeNcy 1193186"H~ Timecounter "TSC" frequency 1:00047312 Hz CPU: mobile AMD AthlOn(tm) 4 Processor (1200.05-MHz 686-#lass CPU) Origin = \M-"AuthenticAMD" Id = 0x622 Steppi~g = 2 Features=0x383f9ff<FP],VME,DE,PSE,TSC,MSR,PAE,MCD,CX8,SEP,MTRR,PGE,MCAlCMOV,PAT,PSE36,MMXlFXCR,SSE> QMD Feadures=0xffvfffffc048\^P000<MP,AMIE,DSP,3DNow!>\M^Jreal memory`(= 503250944 (479 MB) avail memory = 481796097 (459!MB) Inhtialmzing GEOMetry subsystem Pentium`\M-Pro MTRR support enabled npx\^P: <math pro#assor> on }ot(erboard npz0: INT 16 interface\^Bacpi0: <AMIINT VIA_K7 > on motherboard $ACPI-0625: **> Info: GPE B,ock0 definad as GPM0 to GPE15 Using $PIR table, 5 entries at 0xc00f81q0 acpi0: power buttoJ is haneled(\M-as a fixed fuature programming model. Timecounter "ACPI-fast" frequency 357y545 Hz acpi_timer0: <"4-bit timer at 3.579545MHz> port 0x808-0x80b0on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz2: <thermal zone> on acpi0 acpi_bwtton0: <Pgwer Futton> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-\^Px#ff on acpi0 pci0: <aCPI PKI bus> on pcib0 agp0: <VIA\24082C836\^S (Apollo KT133A) host t\M-o PCI(bridge> mem 0xe0000000-0xe3ffffff at ddvice 0.0 on pci0 pcib1: <PCI-P\^CI bridge>!et device 1n0 on pci0 pci1: <PCI bus> on pgij1 pca1: <diSplay, VGA> at device 0.p (no driver(attached) cbb0\M-: <O2MicrO OZ6912/6972 PCI-Ca2dBus Bridge> at device 8.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit!PCCardBuc> on cbb0 pcib0: _PRS resource entry"zas uncuPported uype 2 cbb: Unable to M`p IRQ..\M-> device_probe_and_cttach: cbb1 attach reTurned 12 pci0: <serial fws, FireWire> at$devica 16.0 (~o driver attached)\^Kisab0: <PCI-ISA\240bridge> ap de~ice 17.0 on pci0 isa0* <ISA rus> \^?n"isab0 atapcy0: <VAA 8231 ATA100 coftroller> port 0xfc00-0xfc2f at device 17.1 on pci0 !tapci0: CorpEcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapcip uhci0: <VIA 83C5w2 UWB cont2mller> port 0xd400-0xd49f ipq 10 at dewice 17.2 on qci0 usb0: <VHA <;C572 USB controller\M-> On uhci0 uwb0:0UQB revision 1.0 uhub0: VIA UHC\M-I bgot hub- class 9/0, rev 1>10/9.00, addr 1 uhub0: 2 p/rts with 2 removable,$smlf powered \M-uhci1: <TIA 83C572 USB controller> port 0xd000-0xd81f irq 10 at devi\M-ce 17.3 on p\M-ci0 u{b1: <VIA 8;C572 USB coltroller>0on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI rooT hub, class 9/0\^L rev 1.00/1.00, addr 1 uhub1: 2 ports$with 2 reiovAble, self power%d pci0: <bridge, PCI-unknow.> at device 17.4 (no driver attac(ed) pcm0: <VIA VT82C6:6A> pmrt 0xdc00-0xdc03,0xe000-0xe003,0x%400-0xe4gf irq 10 at duvice$17.5 on pci0Jpci\M-0: <simple comms> at device 1?.6"(no drirer attached) vr0: >VIA0V\^T6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xdffff700-0xdffff7ff irq 9 at dEvice 18.0 oj pc)0 vr0: Ethernet address: 00:a0:cc:cb:92:5f\^Zmi)buc0: <MII bus> on vr0 ukp\M-hy0:<Generic IEEE 802.3u med\M-ia0interface> on miibus0 ukphy0\M-:0 10ba3eT, 10baseT-FDX, 100bAseTZ, 100baseTX-FDX. auto acpi_lid0:$<Control Method Lid Switch> on acpi0 acPh_button1: <Sleep Button> on acpi0 acpi_cmbat0: <Cojtrol methoD Battery> on acpi0 acpi_acad0: <AC adapter>(on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x64 mrq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1`irq 1 mn atkbdc0 kbd0 at atk\M-bf0 rsm0: \^\PS/2 Mouse> ira 12 on atkbtc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Ejhanced floppy controller\240(I82057,!NM720>5 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0:\240FIFO enabled, 8 bytes thReshold \M-nd0: <1440-KB\M-"3.5" drive> on fdc0 drive 0 sio0 xorT 0x3f8-0x3ff irq 0 on acpi0 wio0: type 16550AJppc0 port 0x778-0x77b,0x#78-0z37f irq 7 drq 31on acpi0 ppc0: SMC-,ike chipset (ECP/EPP/PS2/NIBBLE) Il COMPATIBLE mode ppc0: FIF_ with 16/16/8 bytesthreshold plip0: <PLIP netwosk hlterfacg> on ppbus0 lpt0: <Printer> on ppbus0 lpt0\^Z Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 orm0: <_ptmon ROM> at(iomem 0xc\^P000-0xcbfff on isa0 tmuimer0 kn is`0 sc0\M-: <System cons\M-ole> at fdag3 0|100 on isa0 sc0:0VGA <16 virtual consoles, flags=0x3\M-00> sio1: configured irq 3 not in bItmap on probed irqs 0 sio1; port maynot be enable$ fga0:!\M-<Generic I\^SA VGA> at port 0x3c0-0x3df iomei 0xa0800-0x"ffff on isa0\^KTimecount\M-ers tick eveby 10.000 msec acpi_cpu: CPU thro4tling enabhed$ 16 stexs froi 100% to 6.2% ad0* 28615MB <TOSHIBA MK3017GA\M-P> [58140/16/63]$at at!0-master UDIA100 acd0: C\M-D-R\^W <TGRiSAN DVD-ROM DRWU88824> at ata1-mastes UDMA33 Mounting root from ufs:/dev/ad0s4a >118>/dev.ad0s4a: clean, 102307 free (1131 frags, 12643 blocks, 0.9% fragmenuation) 8118> ,118> hostname =118>Star4ing apm. pid 676 (nwserv), uid 0: exited on signal 11 (core dumped) Waiting (max 40 seconds) for system procmss `vnlru'`to stop...stoppud Waiting (max 60 seconds) for system proces3 `buf\M-daemon' to stoq...stop0ed Waiting (mAx 60 seconds) for system process `syncer' to stop...sdopped syn#ing disks, buffers pemaining... 17 1' 17 2 2 done Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003 root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc064b000. Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc064b0a8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc064b15c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1200049904 Hz CPU: mobile AMD Athlon(tm) 4 Processor (1200.05-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> real memory = 503250944 (479 MB) avail memory = 482107392 (459 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface Using $PIR table, 5 entries at 0xc00f81a0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> at device 8.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci_cfgintr: 0:8 INTA routed to irq 9 pci0: <serial bus, FireWire> at device 16.0 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8231 ATA100 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 atapci0: Correcting VIA config for southbridge data corruption bug ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 17.4 (no driver attached) pcm0: <VIA VT82C686A> port 0xdc00-0xdc03,0xe000-0xe003,0xe400-0xe4ff irq 10 at device 17.5 on pci0 pci0: <simple comms> at device 17.6 (no driver attached) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xdffff700-0xdffff7ff irq 9 at device 18.0 on pci0 vr0: Ethernet address: 00:a0:cc:cb:92:5f miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) Timecounters tick every 10.000 msec ad0: 28615MB <TOSHIBA MK3017GAP> [58140/16/63] at ata0-master UDMA100 acd0: CD-RW <TORiSAN DVD-ROM DRWU88824> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s4a vr0: Using force reset command. Manufacturer ID: 00004c02 Functions: Network Adaptor, Multi-Functioned Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 040600e04c390010 Product version: 5.0 Product name: Realtek | Rtl8139 | Manufacturer ID: 00004c02 Functions: Network Adaptor, Multi-Functioned Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 040600e04c390010 Product version: 5.0 Product name: Realtek | Rtl8139 | CIS reading done rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x117f mem 0x20001000-0x2000117f irq 9 at device 0.0 on cardbus0 rl0: Ethernet address: 00:50:fc:b8:d7:a4 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pid 513 (nwserv), uid 0: exited on signal 11 (core dumped) [-- Attachment #3 --] # This may also deactivate hw.ata.*dma below: hint.acpi.0.disabled=1 hw.cbb.start_memory=0x20000000 hw.pci.allow_unsupported_io_range=1 hw.ata.atapi_dma=1 hw.ata.ata_dma=1 snd_via82c686_load=yes
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C48210CFAE2943478BB0ADA41A9FA273327972>