Date: Sat, 22 Dec 2012 22:19:00 +0300 From: =?KOI8-R?B?99HexdPMwdcg4cfB0M/X?= <agapov.slava@gmail.com> To: freebsd-usb@freebsd.org Subject: usb d-link dwa-125 Message-ID: <CAAVBhRAAFDy1S_iph2-uyJYEQMAj2Bohh-fO2p6OqYSjUGFybQ@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello all. I use usb wi-fi d-link dwa-125 What I do: 1. insert usb 2. ugen2.2: <Ralink> at usbus2 3. usbconfig -d 2.2 dump_device_desc ugen2.2: <11n Adapter Ralink> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x2001 [b] idProduct = 0x3c1e [/b] bcdDevice = 0x0101 iManufacturer = 0x0001 <Ralink> iProduct = 0x0002 <11n Adapter> iSerialNumber = 0x0003 <1.0> bNumConfigurations = 0x0001 4. in /usr/src/sys/dev/usb/usbdevs added product DLINK DWA125 0x3c1e DWA-125 in /usr/src/sys/dev/usb/usbdevs added RUN_DEV(DLINK, DWA125), and then cd /usr/src/sys/modules/usb/run make 5. load new kernel module kldload ./if_run.ko 6. dmesg run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2 run0: MAC/BBP RT5390 (rev 0x0503), RF unknown (MIMO 1T1R), address bc:f6:85:f8:d1:90 7. ifconfig wlan0 create wlandev run0 wlanmode hostap ifconfig wlan0 create wlandev run0 wlanmode hostap 8. After this, my usb is crashed in dmesg wlan0: Ethernet address: bc:f6:85:f8:d1:90 run0: firmware RT3071 ver. 0.236 loaded wlan0: ieee80211_new_state_locked: pending INIT -> SCAN transition lost run0: at uhub2, port 4, addr 2 (disconnected) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED, ignored) ugen2.2: <Ralink> at usbus2 (disconnected) Help me with this, please.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAVBhRAAFDy1S_iph2-uyJYEQMAj2Bohh-fO2p6OqYSjUGFybQ>