Date: Fri, 1 Mar 2013 08:46:01 +0800 From: XiaoQI Ge <ghw@7axu.com> To: Oleksandr Tymoshenko <gonzo@bluezbox.com> Cc: freebsd-arm@freebsd.org Subject: Re: I u-boot fails to compile Message-ID: <CAKrd9eXru-NCFPeK6Hso=CU2-4LPB0qTXssqYASPMQ2fMAG-NA@mail.gmail.com> In-Reply-To: <512FF7B9.4070700@bluezbox.com> References: <CAKrd9eUVGuU=NuKfCP5d1uaTPC4XoMkjzn_AzcAqeh%2Bu2E9STw@mail.gmail.com> <512FD685.8070009@bluezbox.com> <CAKrd9eX5CyjNDExQvd-4b3JhZSNtVoeneMiVgYU8nvem=6qHeA@mail.gmail.com> <512FF7B9.4070700@bluezbox.com>
next in thread | previous in thread | raw e-mail | index | archive | help
=== Command: sh gmake cubieboard SED=sed CROSS_COMPILE=arm-freebsd- === serial console echo Skip SD equipment Boot from NAND === Welcome to Ge, XiaoQI's Homepage! <https://www.7axu.com>; Gtalk/E-Mail <ghw@7axu.com>:ghw@7axu.com 2013/3/1 Oleksandr Tymoshenko <gonzo@bluezbox.com> > On 2/28/2013 4:28 PM, XiaoQI Ge wrote: > >> I compiled the file size of 22,016 Byte / occupied space of 24,576 Byte >> is rather http://people.freebsd.org/ ~~ ganbold / cubieboard / >> sunxi-spl.bin size and space are 20,480 Byte is not where Iwrong ah? >> >> These files produced the SD card can not start >> === >> dd if = / dev / zero of = a10.img bs = 1m count = 1 >> dd if = sunxi-spl.bin conv = notrunc of = a10.img bs = 1024 seek = 8 >> dd if = u-boot.bin conv = notrunc of = a10.img bs = 1024 seek = 32 >> dd if = a10.img of = $ {DEVNAME} bs = 1m >> === >> > > Which commands did you use to compile u-boot? > What's printed on serial console when you're trying to boot device? > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKrd9eXru-NCFPeK6Hso=CU2-4LPB0qTXssqYASPMQ2fMAG-NA>