Date: Thu, 07 Feb 2013 07:55:05 +0400 From: Sevan / Venture37 <venture37@gmail.com> To: freebsd-virtualization@FreeBSD.org Subject: bhyve hangs on going multi user Message-ID: <51132599.60506@gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
Attempting to start a VM with the following command results in a hang
when the system tries to go multiuser
sudo bhyveload -m 768 -M 8192 -d ./diskdev guest0 && sudo bhyve -c 1 -a
-A -m 768 -M 8192 -I -H -g 0 -s 0:0,hostbridge -s 1:0,virtio-blk,diskdev
-S 31,uart,stdio gues0
/boot/loader.conf
autoboot_delay=5
kernel="kernel"
virtio_load="YES"
if_vtnet_load="YES"
virtio_pci_load="YES"
virtio_blk_load="YES"
# Avoid clock drift
kern.timecounter.hardware="TSC"
kern.timecounter.invariant_tsc="1"
# Tell the guest it is virtualized
#smbios.bios.vendor="Bochs"
smbios.bios.vendor="BHYVE"
console="userboot"
bootverbose="1"
/etc/fstab
/dev/vtbd0s1a / ufs rw 1 1
Booting...
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=01 base=0000000000100000 len=000000002ff00000
SMAP type=01 base=0000000100000000 len=0000000200000000
Table 'APIC' at 0xf0500
APIC: Found table at 0xf0500APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r246446: Thu Feb 7 02:36:17 UTC 2013
you@dev.foo.local:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.2 (tags/RELEASE_32/final 170710) 20121221
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81822000.
Hypervisor: Origin = "BHyVBHyVBHyV"
Calibrating TSC clock ... TSC clock: 3399738220 Hz
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (3399.74-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a
Stepping = 9
Features=0x8fa3ab7f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,PBE>
Features2=0xe3bae257<SSE3,PCLMULQDQ,DTES64,DS_CPL,SMX,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,F16C,RDRAND,HV>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 12884901888 (12288 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x000000000184f000 - 0x000000002fffffff, 779816960 bytes (190385 pages)
0x0000000100000000 - 0x00000002e96e7fff, 8211300352 bytes (2004712 pages)
avail memory = 8932638720 (8518 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BHYVE BVMADT >
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff8000223000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 0
random device not loaded; using insecure entropy
ULE: setup cpu 0
ACPI: RSDP 0xf0400 00024 (v02 BHYVE )
ACPI: XSDT 0xf0480 00034 (v01 BHYVE BVXSDT 00000001 INTL 20130117)
ACPI: APIC 0xf0500 0004A (v01 BHYVE BVMADT 00000001 INTL 20130117)
ACPI: FACP 0xf0600 0010C (v05 BHYVE BVFACP 00000001 INTL 20130117)
ACPI: DSDT 0xf0800 000F2 (v02 BHYVE BVDSDT 00000001 INTL 20130117)
ACPI: FACS 0xf0780 00040
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 1.1> irqs 0-16 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00000011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Hardware, Intel IvyBridge+ RNG>
module_register_init: MOD_LOAD (vesa, 0xffffffff80c24d10, 0) error 19
io: <I/O>
kbd0 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <BHYVE BVXSDT> on motherboard
ACPI: All ACPI Tables successfully acquired
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us,
adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
Event timer "RTC" frequency 32768 Hz quality 0
ACPI timer: 1/5 1/4 1/5 1/4 1/3 1/4 1/5 1/4 1/5 1/5 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: could not get PCI interrupt routing table for \_SB_.PCI0 -
AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1275, dev=0x1275, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1af4, dev=0x1001, revid=0x00
domain=0, bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
MSI-X supports 2 messages in map 0x14
map[10]: type I/O Port, range 32, base 0x2000, size 6, enabled
pcib0: allocated type 4 (0x2000-0x203f) for rid 10 of pci0:0:1:0
map[14]: type Memory, range 32, base 0x30000000, size 13, enabled
found-> vendor=0x131f, dev=0x2000, revid=0x00
domain=0, bus=0, slot=31, func=0
class=07-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
map[10]: type I/O Port, range 32, base 0x3f8, size 3, enabled
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 10 of pci0:0:31:0
pcib0: no PRT entry for 0.31.INTA
virtio_pci0: <VirtIO PCI Block adapter> port 0x2000-0x203f mem
0x30000000-0x30001fff at device 1.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci0
virtio_pci0: host features: 0x10000004 <RingIndirect,MaxNumSegs>
virtio_pci0: negotiated features: 0x10000004 <RingIndirect,MaxNumSegs>
virtio_pci0: attempting to allocate 2 MSI-X vectors (2 supported)
msi: routing MSI-X IRQ 256 to local APIC 0 vector 50
msi: routing MSI-X IRQ 257 to local APIC 0 vector 51
virtio_pci0: using IRQs 256-257 for MSI-X
virtio_pci0: using per VQ MSIX interrupts
vtblk0: 20480MB (41943040 512 byte sectors)
uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 at device 31.0 on pci0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 52
uart2: fast interrupt
uart2: console (9600,n,8,1)
acpi0: wakeup code va 0xffffff8000299000 pa 0x4000
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 1700037000 Hz
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
lo0: bpf attached
hptrr: no controller detected.
hpt27xx: no controller detected.
GEOM: new disk vtbd0
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1699869110 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/vtbd0s1a [rw]...
start_init: trying /sbin/init
pid 17 (stty), uid 0: exited on signal 4
Illegal instruction
pid 19 (ps), uid 0: exited on signal 4
Illegal instruction
Setting hostuuid: 524a76a9-70d9-11e2-9241-9f81272ed682.
Setting hostid: 0x7c395229.
No suitable dump device was found.
Entropy harvesting:.
Starting file system checks:
/dev/vtbd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
pid 50 (fsck_ufs), uid 0: exited on signal 4
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
fsck: /dev/vtbd0s1a: Illegal instruction
Unknown error; help!
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51132599.60506>