Date: Sun, 5 Sep 2004 18:29:52 -0400 From: Anish Mistry <mistry.7@osu.edu> To: freebsd-current@freebsd.org Subject: USB umass panic Message-ID: <200409051830.00656.mistry.7@osu.edu>
next in thread | raw e-mail | index | archive | help
--Boundary-02=_oN5OBooXw3BNWiT
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
I'm getting the following panic when I plugged/unplugged in my usb camera f=
or=20
the first time. =20
Repeat:
1) plug in camera while on
2) unplug a few seconds later
3) panic (hand transcribed, must get firewire debugging equipment):
umass0: at uhub0 port 1 (addr 2) disconnected
=46atal trap 12: page fault while in kernel mode
fault virtual address =3D 0xdeadc0de
fault code =3D supervisor read, page not present
instruction pointer =3D 0x8:0xc072327b
stack pointer =3D 0x10:0xcb2c0c0c
frame pointer =3D 0x10:0xcb2c0c3c
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 22 (irq11: ohci0)
[thread 100019]
Stopped at ohci_device_request+0xdf: movl 0(%edx),%ecx
db> trace
ohci_device_request(c16bd200,c16bd200,c16d8700,cb2c0c64,c071aa03) at=20
ohci_device_request+0xdf
ohci_device_ctrl_start(c16bd200,c116b400,c16d8700,cb2c0c8c,c071a962) at=20
ohci_device_ctrl_start+0x23
usbd_start_next(c16d8700,0,0,0,c116b43c) at usbd_start_next+0x37
usb_transfer_complete(c116b400,5,c16d8700,0,0) at usb_transfer_complete+0x1=
c2
ohci_softint(c1143000,c1143000,cb2c0ce8,c07227b6,c1143000) at=20
ohci_softintr+0x238
usb_schedsoftintr(c1143000,c1143000,a651f30,c116ac00,c10b1780) at=20
usb_schedsoftintr+0x2f
ohci_intr1(c1143000,cd2c0d1c,c049f1c6,c1143000,0) at ohci_intr1+0x1aa
ohci_intr(c1143000,0,1372,c10bde00,0) at ohci_intr+0x30
ithread_loop(c10b1780,cb2c0d48,c10b1780,c049f044,0) at othread_loop+0x182
fork_exit(c049f044,c10b1780,cb2c0d48) at fork_exit+0x7e
fork_trampoline() at fork_trampoline+0x8
=2D-- trap 0x1, eip =3D 0, esp =3D 0xcb2c0d7c, ebp =3D 0 ---
Also after about a minute or two of just having the camera plugged into the=
=20
USB slot, the whole system just hard locks.
Repeat:
1) plug in camera while on
2) wait about a minute
3) system freezes, needs a hard reset
Dmesg:
6-CURRENT as of 2004-09-04
real memory =3D 251527168 (239 MB)
avail memory =3D 240635904 (229 MB)
Crusoe LongRun support enabled, current mode: 2 <867MHz 1300mV 100%>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ PAULING2> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfc004000-0xfc004ff=
f=20
irq 11 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Sony Sony DSC, rev 2.00/5.00, addr 2
umass0: RBC over CBI; quirks =3D 0x0000
umass0:0:0:-1: Attached to scbus0
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xfc005000-0xfc005fff irq 9 =
at=20
device 4.0 on pci0
pcm0: <SigmaTel STAC9756/57 AC97 Codec>
pcm0: [GIANT-LOCKED]
pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-CardBus> at device 12.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port=20
0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xfc007800-0xfc0078=
ff=20
irq 9 at device 16.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:00:ae:45:08
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem=20
0xfc000000-0xfc003fff,0xfc007000-0xfc0077ff irq 9 at device 19.0 on pci0
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:00:b0:29:d0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
acpi_video0: <ACPI video extension> port 0x1400-0x14ff mem=20
0xfc006000-0xfc006fff,0xfd000000-0xfdffffff irq 9 at device 20.0 on pci0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
acpi_fuji0: <Fujitsu Function Buttons> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 859336442 Hz quality 800
Timecounters tick every 0.976 msec
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: Off Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
ad0: 19077MB <TOSHIBA MK2018GAP/M1.42 A> [38760/16/63] at ata0-master UDMA66
ATAPI_RESET time =3D 50us
acd0: CDRW <TOSHIBA DVD-ROM SD-R2212/1F15> at ata1-master PIO4
umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, IOERROR
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: CBI bulk-out stall clear failed, IOERROR
=46atal trap 12: page fault while in kernel mode
fault virtual address =3D 0xdeadc116
fault code =3D supervisor write, page not present
instruction pointer =3D 0x8:0xc0432875
stack pointer =3D 0x10:0xcb2abc6c
frame pointer =3D 0x10:0xcb2abcf4
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 35 (swi3: cambio)
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD 6.0-CURRENT #16: Sun Sep 5 02:12:29 EDT 2004
root@littleguy:/usr/obj/usr/src/sys/LITTLEGUY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07c2000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc07c2250.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc07c22fc.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc07c23ac.
Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc07c2458.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc07c2504.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc07c25ac.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc07c2654.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc07c2700.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07c27b0.
Preloaded elf module "/boot/kernel/acpi_fuji.ko" at 0xc07c285c.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc07c290c.
Calibrating clock(s) ... i8254 clock: 1193129 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 859335780 Hz
CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (859.34-MHz 586-class CPU)
Origin =3D "GenuineTMx86" Id =3D 0x543 Stepping =3D 3
Features=3D0x80893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP,CMOV,MMX>
Processor revision 1.4.1.0
Code Morphing Software revision 4.3.0-9-197
20020207 23:55 official release 4.3.0#7
real memory =3D 251527168 (239 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000eb77fff, 238362624 bytes (58194 pages)
avail memory =3D 240635904 (229 MB)
Crusoe LongRun support enabled, current mode: 1 <867MHz 1300mV 100%>
bios32: Found BIOS32 Service Directory header at 0xc00f6f90
bios32: Entry =3D 0xfd770 (c00fd770) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xfd770+0x11e
pnpbios: Found PnP BIOS data at 0xc00f6fe0
pnpbios: Entry =3D f0000:9528 Rev =3D 1.0
Other BIOS signatures found:
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ PAULING2> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003074
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there (id=3D03951279)
pcibios: BIOS version 2.10
=46ound $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 2 A 0x59 3 4 5 7 10 11
embedded 0 4 A 0x08 3 4 5 7 9 10 14 15
embedded 0 12 A 0x01 3 4 5 7 9 10 14 15
embedded 0 16 A 0x02 3 4 5 7 9 10 14 15
embedded 0 18 A 0x05 3 4 5 7 9 10 14 15
embedded 0 18 B 0x06 3 4 5 7 9 10 14 15
embedded 0 19 A 0x03 3 4 5 7 9 10 14 15
embedded 0 20 A 0x04 3 4 5 7 9 10 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 6 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 6 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 18 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 12 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0> port 0x66,0x62 on acpi0
ACPI timer looks BAD min =3D 2, max =3D 815, width =3D 813
ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5
ACPI timer looks BAD min =3D 2, max =3D 5, width =3D 3
ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
ACPI timer looks BAD min =3D 2, max =3D 5, width =3D 3
ACPI timer looks GOOD min =3D 2, max =3D 4, width =3D 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
acpi link get: empty IRQ resource
ACPI PCI link initial configuration:
\\_SB_.PCI0.EIO_.LNKU irq 0: [ 3 4 5 7 9 10 11] 11+ low,level,sharable=
=20
0.2.0
\\_SB_.PCI0.EIO_.LNKH irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable=
=20
0.4.0
\\_SB_.PCI0.EIO_.LNKA irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable=
=20
0.12.0
\\_SB_.PCI0.EIO_.LNKC irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable=
=20
0.19.0
\\_SB_.PCI0.EIO_.LNKD irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable=
=20
0.20.0
\\_SB_.PCI0.EIO_.LNKB irq 0: [ 3 4 5 7 9 10 11] 9+ low,level,sharable=
=20
0.16.0
\\_SB_.PCI0.EIO_.LNKE irq 0: [ 3 4 5 7 9 10 11] 0+ low,level,sharable=
=20
0.18.0
\\_SB_.PCI0.EIO_.LNKF irq 0: [ 3 4 5 7 9 10 11] 0+ low,level,sharable=
=20
0.18.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 1, range 32, base fc100000, size 20, enabled
found-> vendor=3D0x1279, dev=3D0x0395, revid=3D0x02
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x2200, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1279, dev=3D0x0396, revid=3D0x00
bus=3D0, slot=3D0, func=3D1
class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1279, dev=3D0x0397, revid=3D0x00
bus=3D0, slot=3D0, func=3D2
class=3D05-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[10]: type 1, range 32, base fc004000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.EIO_.LNKU)
pcib0: possible interrupts: 3 4 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.EIO_.LNKU (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKH (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKA (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKC (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKD (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKB (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKE (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
\\_SB_.PCI0.EIO_.LNKF (references 1, priority 2241):
interrupts: 11 10 5 9 7 4 3
penalty: 80 80 130 160 5080 5080 5080
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.EIO_.LNKU
found-> vendor=3D0x10b9, dev=3D0x5237, revid=3D0x03
bus=3D0, slot=3D2, func=3D0
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0017, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 32, base fc005000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.EIO_.LNKH)
pcib0: possible interrupts: 3 4 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.EIO_.LNKH (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
\\_SB_.PCI0.EIO_.LNKA (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
\\_SB_.PCI0.EIO_.LNKC (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
\\_SB_.PCI0.EIO_.LNKD (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
\\_SB_.PCI0.EIO_.LNKB (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
\\_SB_.PCI0.EIO_.LNKE (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
\\_SB_.PCI0.EIO_.LNKF (references 1, priority 2334):
interrupts: 10 11 5 9 7 4 3
penalty: 160 170 210 320 5160 5160 5160
pcib0: slot 4 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKH
found-> vendor=3D0x10b9, dev=3D0x5451, revid=3D0x01
bus=3D0, slot=3D4, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x18 (6000 ns)
intpin=3Da, irq=3D9
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=3D0x10b9, dev=3D0x7101, revid=3D0x00
bus=3D0, slot=3D6, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0200, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x10b9, dev=3D0x1533, revid=3D0x00
bus=3D0, slot=3D7, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x000f, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.EIO_.LNKA)
pcib0: possible interrupts: 3 4 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.EIO_.LNKA (references 1, priority 2427):
interrupts: 10 11 5 9 7 4 3
penalty: 240 250 290 490 5240 5240 5240
\\_SB_.PCI0.EIO_.LNKC (references 1, priority 2427):
interrupts: 10 11 5 9 7 4 3
penalty: 240 250 290 490 5240 5240 5240
\\_SB_.PCI0.EIO_.LNKD (references 1, priority 2427):
interrupts: 10 11 5 9 7 4 3
penalty: 240 250 290 490 5240 5240 5240
\\_SB_.PCI0.EIO_.LNKB (references 1, priority 2427):
interrupts: 10 11 5 9 7 4 3
penalty: 240 250 290 490 5240 5240 5240
\\_SB_.PCI0.EIO_.LNKE (references 1, priority 2427):
interrupts: 10 11 5 9 7 4 3
penalty: 240 250 290 490 5240 5240 5240
\\_SB_.PCI0.EIO_.LNKF (references 1, priority 2427):
interrupts: 10 11 5 9 7 4 3
penalty: 240 250 290 490 5240 5240 5240
pcib0: slot 12 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKA
found-> vendor=3D0x104c, dev=3D0xac50, revid=3D0x01
bus=3D0, slot=3D12, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns)
intpin=3Da, irq=3D9
powerspec 1 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001800, size 4, enabled
found-> vendor=3D0x10b9, dev=3D0x5229, revid=3D0xc3
bus=3D0, slot=3D15, func=3D0
class=3D01-01-fa, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns)
intpin=3Da, irq=3D255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00008000, size 8, enabled
map[14]: type 1, range 32, base fc007800, size 8, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.EIO_.LNKB)
pcib0: possible interrupts: 3 4 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.EIO_.LNKC (references 1, priority 2520):
interrupts: 10 11 5 9 7 4 3
penalty: 320 330 370 660 5320 5320 5320
\\_SB_.PCI0.EIO_.LNKD (references 1, priority 2520):
interrupts: 10 11 5 9 7 4 3
penalty: 320 330 370 660 5320 5320 5320
\\_SB_.PCI0.EIO_.LNKB (references 1, priority 2520):
interrupts: 10 11 5 9 7 4 3
penalty: 320 330 370 660 5320 5320 5320
\\_SB_.PCI0.EIO_.LNKE (references 1, priority 2520):
interrupts: 10 11 5 9 7 4 3
penalty: 320 330 370 660 5320 5320 5320
\\_SB_.PCI0.EIO_.LNKF (references 1, priority 2520):
interrupts: 10 11 5 9 7 4 3
penalty: 320 330 370 660 5320 5320 5320
pcib0: slot 16 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKB
found-> vendor=3D0x10ec, dev=3D0x8139, revid=3D0x10
bus=3D0, slot=3D16, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0003, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 (16000 n=
s)
intpin=3Da, irq=3D9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc007000, size 11, enabled
map[14]: type 1, range 32, base fc000000, size 14, enabled
pcib0: matched entry for 0.19.INTA (src \\_SB_.PCI0.EIO_.LNKC)
pcib0: possible interrupts: 3 4 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.EIO_.LNKC (references 1, priority 2612):
interrupts: 10 11 5 9 7 4 3
penalty: 400 410 450 830 5400 5400 5400
\\_SB_.PCI0.EIO_.LNKD (references 1, priority 2612):
interrupts: 10 11 5 9 7 4 3
penalty: 400 410 450 830 5400 5400 5400
\\_SB_.PCI0.EIO_.LNKE (references 1, priority 2612):
interrupts: 10 11 5 9 7 4 3
penalty: 400 410 450 830 5400 5400 5400
\\_SB_.PCI0.EIO_.LNKF (references 1, priority 2612):
interrupts: 10 11 5 9 7 4 3
penalty: 400 410 450 830 5400 5400 5400
pcib0: slot 19 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKC
found-> vendor=3D0x104c, dev=3D0x8026, revid=3D0x00
bus=3D0, slot=3D19, func=3D0
class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0012, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns)
intpin=3Da, irq=3D9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 00001400, size 8, enabled
map[18]: type 1, range 32, base fc006000, size 12, enabled
pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.EIO_.LNKD)
pcib0: possible interrupts: 3 4 5 7 9 10 11
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.EIO_.LNKD (references 1, priority 2705):
interrupts: 10 11 5 9 7 4 3
penalty: 480 490 530 1000 5480 5480 5480
\\_SB_.PCI0.EIO_.LNKE (references 1, priority 2705):
interrupts: 10 11 5 9 7 4 3
penalty: 480 490 530 1000 5480 5480 5480
\\_SB_.PCI0.EIO_.LNKF (references 1, priority 2705):
interrupts: 10 11 5 9 7 4 3
penalty: 480 490 530 1000 5480 5480 5480
pcib0: slot 20 INTA routed to irq 9 via \\_SB_.PCI0.EIO_.LNKD
found-> vendor=3D0x1002, dev=3D0x4c52, revid=3D0x64
bus=3D0, slot=3D20, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D9
powerspec 1 supports D0 D1 D2 D3 current D0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfc004000-0xfc004ff=
f=20
irq 11 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc004000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xfc005000-0xfc005fff irq 9 =
at=20
device 4.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
pcm0: <SigmaTel STAC9756/57 AC97 Codec (id =3D 0x83847656)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel =
3D=20
Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 1c8000, 1000; 0xc1174000 -> 1c8000
pcm0: sndbuf_setmap 1e6000, 1000; 0xc1172000 -> 1e6000
pcm0: sndbuf_setmap e984000, 1000; 0xc1170000 -> e984000
pcm0: sndbuf_setmap e9a2000, 1000; 0xc116e000 -> e9a2000
pcm0: sndbuf_setmap 218000, 1000; 0xc1184000 -> 218000
pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge, PCI-CardBus> at device 12.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port=20
0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1800
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0
ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0
ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0
ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0
ata0-master: stat=3D0xd0 err=3D0xd0 lsb=3D0xd0 msb=3D0xd0
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x00 err=3D0x04 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata1: [MPSAFE]
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8000
rl0: <RealTek 8139 10/100BaseTX> port 0x8000-0x80ff mem 0xfc007800-0xfc0078=
ff=20
irq 9 at device 16.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:e0:00:ae:45:08
rl0: [MPSAFE]
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem=20
0xfc000000-0xfc003fff,0xfc007000-0xfc0077ff irq 9 at device 19.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfc007000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:00:b0:29:d0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
acpi_video0: <ACPI video extension> port 0x1400-0x14ff mem=20
0xfc006000-0xfc006fff,0xfd000000-0xfdffffff irq 9 at device 20.0 on pci0
found CRT monitor(100), detectable by BIOS, head #0
found LCD panel(110), detectable by BIOS, head #0
found TV(200), detectable by BIOS, head #0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00003000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_fuji0: <Fujitsu Function Buttons> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this=20
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 7e 4f 4f 82 55 03=20
b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f=20
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 7e 4f 4f 82 55 03=20
b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f=20
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 859335780 Hz quality 800
Timecounters tick every 0.976 msec
Linux ELF exec handler installed
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_acad0: Off Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA66 on AcerLabs Aladdin chip
ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D80pin
ATAPI_RESET time =3D 80us
ata1-master: setting PIO4 on AcerLabs Aladdin chip
acd0: <TOSHIBA DVD-ROM SD-R2212/1F15> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, PI=
O4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/2/63 s:63 l:10490382
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/9/63 s:10490445 l:20964825
[2] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/0/63 s:31455270 l:7598745
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5371075584 end 5371107839
GEOM: Configure ad0s2, start 5371107840 length 10733990400 end 16105098239
GEOM: Configure ad0s3, start 16105098240 length 3890557440 end 19995655679
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 481656832 end 750092287
GEOM: Configure ad0s2c, start 0 length 10733990400 end 10733990399
GEOM: Configure ad0s2d, start 750092288 length 268435456 end 1018527743
GEOM: Configure ad0s2e, start 1018527744 length 268435456 end 1286963199
GEOM: Configure ad0s2f, start 1286963200 length 9447027200 end 10733990399
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 0
linprocfs registered
umass0: Sony Sony DSC, rev 2.00/5.00, addr 2
umass0: RBC over CBI; quirks =3D 0x0000
umass0:0:0:-1: Attached to scbus0
=2D-=20
Anish Mistry
--Boundary-02=_oN5OBooXw3BNWiT
Content-Type: application/pgp-signature
Content-Description: signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (FreeBSD)
iD8DBQBBO5NoxqA5ziudZT0RAmIAAKDGJIZEmp479QWmZz80UOucFZ6ZGQCfb5Fg
V3nQbVSNNnu6lsuyHssTthM=
=X6ai
-----END PGP SIGNATURE-----
--Boundary-02=_oN5OBooXw3BNWiT--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409051830.00656.mistry.7>