Date: Tue, 12 Dec 2017 23:18:31 +0100 From: "O. Hartmann" <ohartmann@walstatt.org> To: "Rodney W. Grimes" <freebsd-rwg@pdx.rh.CN85.dnsmgr.net> Cc: "O. Hartmann" <ohartmann@walstatt.org>, FreeBSD CURRENT <freebsd-current@freebsd.org>, Freddie Cash <fjwcash@gmail.com>, Alan Somers <asomers@freebsd.org> Subject: Re: SMART: disk problems on RAIDZ1 pool: (ada6:ahcich6:0:0:0): CAM status: ATA Status Error Message-ID: <20171212231858.294a2cb5@thor.intern.walstatt.dynvpn.de> In-Reply-To: <201712121852.vBCIqRuZ087701@pdx.rh.CN85.dnsmgr.net> References: <20171212192220.119ca2d3@thor.intern.walstatt.dynvpn.de> <201712121852.vBCIqRuZ087701@pdx.rh.CN85.dnsmgr.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--Sig_/QYT9Wra0yqX6hyEFFfRyrQZ
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Am Tue, 12 Dec 2017 10:52:27 -0800 (PST)
"Rodney W. Grimes" <freebsd-rwg@pdx.rh.CN85.dnsmgr.net> schrieb:
Thank you for answering that fast!
> > Hello,
> >=20
> > running CURRENT (recent r326769), I realised that smartmond sends out s=
ome console
> > messages when booting the box:
> >=20
> > [...]
> > Dec 12 14:14:33 <3.2> box1 smartd[68426]: Device: /dev/ada6, 1 Currentl=
y unreadable
> > (pending) sectors Dec 12 14:14:33 <3.2> box1 smartd[68426]: Device: /de=
v/ada6, 1
> > Offline uncorrectable sectors
> > [...]
> >=20
> > Checking the drive's SMART log with smartctl (it is one of four 3TB dis=
k drives), I
> > gather these informations:
> >=20
> > [... smartctl -x /dev/ada6 ...]
> > Error 42 [17] occurred at disk power-on lifetime: 25335 hours (1055 day=
s + 15 hours)
> > When the command that caused the error occurred, the device was activ=
e or idle.
> >=20
> > After command completion occurred, registers were:
> > ER -- ST COUNT LBA_48 LH LM LL DV DC
> > -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- --
> > 40 -- 51 00 00 00 00 c2 7a 72 98 40 00 Error: UNC at LBA =3D 0xc27a7=
298 =3D 3262804632
> >=20
> > Commands leading to the command that caused the error were:
> > CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat=
ure_Name
> > -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------=
------ --------------------
> > 60 00 b0 00 88 00 00 c2 7a 73 20 40 08 23:38:12.195 READ FPDMA Q=
UEUED
> > 60 00 b0 00 80 00 00 c2 7a 72 70 40 08 23:38:12.195 READ FPDMA Q=
UEUED
> > 2f 00 00 00 01 00 00 00 00 00 10 40 08 23:38:12.195 READ LOG EXT
> > 60 00 b0 00 70 00 00 c2 7a 73 20 40 08 23:38:09.343 READ FPDMA Q=
UEUED
> > 60 00 b0 00 68 00 00 c2 7a 72 70 40 08 23:38:09.343 READ FPDMA Q=
UEUED
> > [...]
> >=20
> > and
> >=20
> > [...]
> > SMART Attributes Data Structure revision number: 16
> > Vendor Specific SMART Attributes with Thresholds:
> > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
> > 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 64
> > 3 Spin_Up_Time POS--K 178 170 021 - 6075
> > 4 Start_Stop_Count -O--CK 098 098 000 - 2406
> > 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
> > 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
> > 9 Power_On_Hours -O--CK 066 066 000 - 25339
> > 10 Spin_Retry_Count -O--CK 100 100 000 - 0
> > 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
> > 12 Power_Cycle_Count -O--CK 098 098 000 - 2404
> > 192 Power-Off_Retract_Count -O--CK 200 200 000 - 154
> > 193 Load_Cycle_Count -O--CK 001 001 000 - 2055746
> > 194 Temperature_Celsius -O---K 122 109 000 - 28
> > 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
> > 197 Current_Pending_Sector -O--CK 200 200 000 - 1
> > 198 Offline_Uncorrectable ----CK 200 200 000 - 1
> > 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
> > 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 5
> > ||||||_ K auto-keep
> > |||||__ C event count
> > ||||___ R error rate
> > |||____ S speed/performance
> > ||_____ O updated online
> > |______ P prefailure warning
> >=20
> > [...] =20
>=20
> The data up to this point informs us that you have 1 bad sector
> on a 3TB drive, that is actually an expected event given the data
> error rate on this stuff is such that your gona have these now
> and again.
>=20
> Given you have 1 single event I would not suspect that this drive
> is dying, but it would be prudent to prepare for that possibility.
Hello.
Well, I copied simply "one single event" that has been logged so far.
As you (and I) can see, it is error #42. After I posted here, a reboot has =
taken place
because the "repair" process on the Pool suddenly increased time and now I'=
m with error
#47, but interestingly, it is a new block that is damaged, but the SMART at=
tribute fields
show this for now:
[...]
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 69
3 Spin_Up_Time POS--K 178 170 021 - 6075
4 Start_Stop_Count -O--CK 098 098 000 - 2406
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 066 066 000 - 25343
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 098 098 000 - 2404
192 Power-Off_Retract_Count -O--CK 200 200 000 - 154
193 Load_Cycle_Count -O--CK 001 001 000 - 2055746
194 Temperature_Celsius -O---K 122 109 000 - 28
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 5
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
[...]
197 Current_Pending_Sector decreased to zero so far, but with every reboot,=
the error
count seems to increase:
[...]
Error 47 [22] occurred at disk power-on lifetime: 25343 hours (1055 days + =
23 hours)
When the command that caused the error occurred, the device was active or=
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- --
40 -- 51 00 00 00 00 c2 19 d9 88 40 00 Error: UNC at LBA =3D 0xc219d988 =
=3D 3256473992
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_=
Name
-- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- -------------=
-- --------------------
60 00 b0 00 d0 00 00 c2 19 da 28 40 08 1d+07:12:34.336 READ FPDMA QUEUED
60 00 b0 00 c8 00 00 c2 19 d9 78 40 08 1d+07:12:34.336 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 40 08 1d+07:12:34.336 READ LOG EXT
60 00 b0 00 b8 00 00 c2 19 da 28 40 08 1d+07:12:31.484 READ FPDMA QUEUED
60 00 b0 00 b0 00 00 c2 19 d9 78 40 08 1d+07:12:31.483 READ FPDMA QUEUED
I think this is watching a HDD dying, isn't it?
I'd say, a broken cabling would produce different errors, wouldn't it?
The Western Digital Green series HDD is a useful fellow when the HDD is use=
d as a single
drive. I think there might be an issue with paring 4 HDDs, 3 of them "GREEN=
", in a RAIDZ
and physically sitting next to each other. Maybe it is time to replace them=
one by one ...
>=20
>=20
> >=20
> > The ZFS pool is RAIDZ1, comprised of 3 WD Green 3TB HDD and one WD RED =
3 TB HDD. The
> > failure occured is on one of the WD Green 3 TB HDD. =20
> Ok, so the data is redundantly protected. This helps a lot.
>=20
> > The pool is marked as "resilvered" - I do scrubbing on a regular basis =
and the
> > "resilvering" message has now aapeared the second time in row. Searchin=
g the net
> > recommend on SMART attribute 197 errors, in my case it is one, and in c=
ombination with
> > the problems occured that I should replace the disk. =20
>=20
> It is probably putting the RAIDZ in that state as the scrub is finding a =
block
> it can not read.
>=20
> >=20
> > Well, here comes the problem. The box is comprised from "electronical w=
aste" made by
> > ASRock - it is a Socket 1150/IvyBridge board, which has its last Firmwa=
re/BIOS update
> > got in 2013 and since then UEFI booting FreeBSD from a HDD isn't possib=
le (just to
> > indicate that I'm aware of having issues with crap, but that is some ot=
her issue
> > right now). The board's SATA connectors are all populated.
> >=20
> > So: Due to the lack of adequate backup space I can only selectively bac=
kup portions,
> > most of the space is occupied by scientific modelling data, which I had=
worked on. So
> > backup exists! In one way or the other. My concern is how to replace th=
e faulty HDD!
> > Most HowTo's indicate a replacement disk being prepared and then "repla=
ced" via ZFS's
> > replace command. This isn't applicable here.
> >=20
> > Question: is it possible to simply pull the faulty disk (implies I know=
exactly which
> > one to pull!) and then prepare and add the replacement HDD and let the =
system do its
> > job resilvering the pool? =20
>=20
> That may work, but I think I have a simpler solution.
>=20
> >=20
> > Next question is: I'm about to replace the 3 TB HDD with a more recent =
and modern 4 TB
> > HDD (WD RED 4TB). I'm aware of the fact that I can only use 3 TB as the=
other disks
> > are 3 TB, but I'd like to know whether FreeBSD's ZFS is capable of hand=
ling it? =20
>=20
> Someone else?
>=20
> >=20
> > This is the first time I have issues with ZFS and a faulty drive, so if=
some of my
> > questions sound naive, please forgive me. =20
>=20
> One thing to try is to see if we can get the drive to fix itself, first o=
rder
> of business is can you take this server out of service? If so I would
> simply try to do a
> repeat 100 dd if=3D/dev/whicheverhdisbad of=3D/dev/null conv=3Dnoerror, s=
ync iseek=3D3262804632
>=20
> That is trying to read that block 100 times, if it successful even 1 time
> smart should remap the block and you are all done.
Given the fact, that this errorneous block is like a moving target, it this=
solution
still the favorite one? I'll try, but I already have the replacement 4 TB H=
DD at hand.
>=20
> If that fails we can try to zero the block, there is a risk here, but rai=
dz should just
> handle this as a data corruption of a block. This could possibly lead to=
data loss,
> so USE AT YOUR OWN RISK ASSESMENT.
> dd if=3D/dev/zero of=3D/dev/whateverdrivehasissues bs=3D512 count=3D1 ose=
ek=3D3262804632
I would then be oseek=3D3256473992, too.
>=20
> That should forceable overwrite the bad block with 0's, the smart firmware
> well see this in the pending list, write the data, read it back, if succe=
ssful
> remove it from the pending list, if failed reallocate the block and write
> the 0's to the reallocation and add 1 to the remapped block count.
>=20
> You might google for "how to fix a pending reallocation"
>=20
> > Thanks in advance,
> > Oliver
> > --=20
> > O. Hartmann =20
>=20
Kind regards,
Oliver
--=20
O. Hartmann
Ich widerspreche der Nutzung oder =C3=9Cbermittlung meiner Daten f=C3=BCr
Werbezwecke oder f=C3=BCr die Markt- oder Meinungsforschung (=C2=A7 28 Abs.=
4 BDSG).
--Sig_/QYT9Wra0yqX6hyEFFfRyrQZ
Content-Type: application/pgp-signature
Content-Description: OpenPGP digital signature
-----BEGIN PGP SIGNATURE-----
iLUEARMKAB0WIQQZVZMzAtwC2T/86TrS528fyFhYlAUCWjBV0gAKCRDS528fyFhY
lOZDAf0fajjJMeGcTKvmMoTlc8AoxCH1Sh8FOWqMdhgMplaEctPUYNd0KeXfoXX3
Pah6/Rs1N1Ypzj7BM/wybCGSbrf4Af9asahtCJ66Qnr+HydE4hby6aJcLLehGpqc
URxnHDu0kanXce95f2+/1q7smr0Mdf28dVj0qccN5vIkGEn4Nkh3
=Irs3
-----END PGP SIGNATURE-----
--Sig_/QYT9Wra0yqX6hyEFFfRyrQZ--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20171212231858.294a2cb5>