Date: Mon, 9 Oct 2000 18:10:43 +0000 (GMT) From: Peter Ulrich Kruppa <root@pukruppa.de> To: cam <cam@bsdfr.org> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Cannot mount my floppy-drive Message-ID: <Pine.BSF.4.21.0010091800480.217-200000@pukruppa.de> In-Reply-To: <39E1B5EE.F85713DD@bsdfr.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
On Mon, 9 Oct 2000, cam wrote:
> Peter Ulrich Kruppa wrote:
>
> > I am running FreeBSD 4.1 Release and when I try to mount my floppy with
> > # mount /dev/fd0 /mnt
> > I get the message
> >
> > mount: Device not configured
> >
> > I tried to reconfigure my kernel, but that did not work.
>
> I think your floppy drive isn't in the kernel config.
> Check the line: "fdc" in your kernel and in your dmesg.
There seems to be my problem. I will give you my
# dmesg
in the attachment. (I hope that will not annoy the list ??).
> Also, is your floppy drive correctly connected ?? :)
Yes, it has to be: I can boot from floppy, when I like to.
Uli.
=======================================================================
www.pukruppa.de www.2000d.de
=======================================================================
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Thu Jul 27 04:44:16 GMT 2000
root@usw4.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (451.03-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 125763584 (122816K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di fdc0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 118149120 (115380K bytes)
Preloaded elf kernel "kernel" at 0xc040d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040d09c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8501)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Trident model 8400 VGA-compatible display device> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 20.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 20.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port 1 power on failed, IOERROR
uhub1: port 2 power on failed, IOERROR
chip2: <VIA 82C686 AC97 Audio> port 0xe000-0xe003,0xdc00-0xdcff irq 11 at device 20.5 on pci0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 990C> PRINTER MLC,PCL,PML,BIDI-ECP,ECP18
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 12982MB <Maxtor 91361U3> [26377/16/63] at ata0-master using UDMA66
acd0: CDROM <MIDA 40XB> at ata1-master using PIO4
acd1: CD-R <MATSHITA CD-R CW-7582> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s2a
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0010091800480.217-200000>