Date: Wed, 11 Oct 2000 23:25:36 +0200 From: "Christophe Prevotaux" <chris@hexanet.fr> To: current@freebsd.org Subject: [HELP] Problems with new version of CURRENT Message-ID: <200010112125.e9BLPaY01076@zippy.hexanet.fr>
next in thread | raw e-mail | index | archive | help
As you can see below after I cvsuped and made world today
I got the following problems with my GATEWAY 2000 Solo 2150
Laptop and CURRENT
Could someone help me solve these problems
Module can't register problem
random dev problem
linux emulation can't load problem
usb0 problem
unknow ressources ( I think it can't recognize my sound card )
I am willing to test anything devellopers will want me to test
on this machine in order to fix all these things among which
the sound support for this laptop which is supposed to be es1371
==== dmesg ================================
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Oct 11 14:45:37 CEST 2000
root@mydomain :/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 167706624 (163776K bytes)
avail memory = 158994432 (155268K bytes)
Preloaded elf kernel "kernel" at 0xc03b2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03b209c.
Preloaded elf module "splash_bmp.ko" at 0xc03b20ec.
Preloaded elf module "ipfw.ko" at 0xc03b2190.
Preloaded elf module "random.ko" at 0xc03b222c.
module_register: module random already exists!
Module random failed to register: 17
Pentium Pro MTRR support enabled
WARNING: Driver mistake: repeat make_dev("random")
WARNING: Driver mistake: repeat make_dev("urandom")
md0: Malloc disk
module_register_init: MOD_LOAD (splash_bmp, c039a82c, 0) error 2
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
atapci0: Busmastering DMA enabled
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
pci0: <Intel 82371AB Power management controller> at 7.3
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 8.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 8.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pci0: <unknown card> (vendor=0x1102, dev=0x8938) at 9.0 irq 5
pci0: <Lucent K56Flex DSVD LTModem (Win Modem, unsupported)> at 10.0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ed1 at port 0x240-0x25f irq 3 slot 0 on pccard0
ed1: address 00:00:e8:7f:0f:34, type NE2000 (16 bit)
module_register: module isa/ed already exists!
Module isa/ed failed to register: 17
module_register: module isa/ed already exists!
Module isa/ed failed to register: 17
module_register: module pccard/ed already exists!
Module pccard/ed failed to register: 17
module_register: module pci/ed already exists!
Module pci/ed failed to register: 17
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: configured irq 3 not in bitmap of probed irqs 0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
--
===================================================================
Christophe Prevotaux Email: chris@hexanet.fr
HEXANET SARL URL: http://www.hexanet.fr/
Z.A Farman Sud Tel: +33 (0)3 26 79 30 05
9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02
BP415 Fax: +33 (0)3 26 79 30 06
51689 Reims Cedex 2
FRANCE
===================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010112125.e9BLPaY01076>