Date: Fri, 05 Dec 1997 15:02:51 +0100 (CET) From: Andrea Sormanni <mc4469@mclink.it> To: freebsd-hardware@freebsd.org Subject: Problem with SCSI Zip 100 & Trantor T130 Message-ID: <XFMail.971205151004.mc4469@mclink.it>
next in thread | raw e-mail | index | archive | help
Hi all.
I have a problem with my SCSI Zip 100 drive connected with an (old)
Trantor T130 board (NCRC400 based, 8-bit board, without BIOS).
The card is correctly probed at boot time, i can format, disklabel,
mount the disk with any problem, but while trying to copy a file into an
UFS formatted disk i get tons of the following messages:
nca0/5/0: data length underflow
nca0/5/0: data length underflow
nca0/5/0: data length underflow
nca: last byte timeout
The drive works, the file is copied, but very slowly.
The drive should be ok, i have no problem using it under Linux.
Here some infos:
FreeBSD 2.2.5-RELEASE from Walnut Creek CDROM
MB based on Intel Triton 1, Pentium 75 CPU
40 MB RAM, 2 EIDE drives, S3 Trio64 video board.
Kernel config lines:
------
options BOUNCE_BUFFERS
controller nca0 at isa? port 0x350 bio irq 5 vector ncaintr
controller scbus0
disk sd0
------
Output of dmesg:
------
nca0 at 0x350-0x35f irq 5 on isa
nca0: type NCR-53C400
(nca0:5:0): "IOMEGA ZIP 100 J.02" type 0 removable SCSI 2
sd0(nca0:5:0): Direct-Access
sd0(nca0:5:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd0 could not mode sense (4). Using ficticious geometry
96MB (196608 512 byte sectors)
------
Any idea ?
Andrea
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.971205151004.mc4469>