Date: Fri, 11 Jun 1999 03:00:21 -0400 (EDT) From: Joe Clarke <marcus@jclarke-isdn2.cisco.com> To: freebsd-current@freebsd.org Cc: luigi@labinfo.iet.unipi.it Subject: ES1370 Sound problems Message-ID: <Pine.BSF.4.10.9906110254120.423-100000@highlands.cisco.com>
next in thread | raw e-mail | index | archive | help
I currently re-added my es1370-based Ensoniq soundcard to my FreeBSD 3.2 system with the hope of getting Luigi's sound driver working with it. I added the following line to my kernel: device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 Then rebooted. I see the following in my dmesg output: es1: <AudioPCI ES1370> rev 0x00 int a irq 10 on pci0.15.0 pcm1: using I/O space register mapping at 0x1800 which looks good. The card was detected, and pcm1 was bound to it. Next, I cd to /dev, and did a ./MAKEDEV snd1. This built the necessary device entries. I cat my /dev/sndstat, and see the following: FreeBSD Audio Driver (981002) Jun 11 1999 02:46:46 Installed devices: pcm1: <ENSONIQ AudioPCI> at 0x1800 irq 0 dma 0:0 So, that looks promising. However, when I try to play a sound file or even cat a file to /dev/audio, I get nothing. Trying to play an mp3 with mpg123, I get the following: Can't reset audio! Can't reset audio! Is there something I'm missing? Any input would be greatly appreciated. Below is the output from pciconf -l and scanpci. Joe Clarke pciconf -l: chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00 chip1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01 chip2@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00 ide_pci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00 none0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00 chip3@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00 rl0@pci0:14:0: class=0x020000 card=0x12111113 chip=0x12111113 rev=0x10 hdr=0x00 es1@pci0:15:0: class=0x040100 card=0x4c4c4942 chip=0x50001274 rev=0x00 hdr=0x00 ahc0@pci0:16:0: class=0x010000 card=0x78819004 chip=0x81789004 rev=0x01 hdr=0x00 vga0@pci1:0:0: class=0x030000 card=0x00201545 chip=0x002010de rev=0x04 hdr=0x00 scanpci: PCI says configuration type 1 PCI probing configuration type 1 Probing for devices on PCI bus 0: pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x8086 device 0x7190 Intel 82443BX Host pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x8086 device 0x7191 Intel 82443BX AGP pci bus 0x0 cardnum 0x07 function 0x0000: vendor 0x8086 device 0x7110 Intel 82371AB PIIX4 ISA pci bus 0x0 cardnum 0x07 function 0x0001: vendor 0x8086 device 0x7111 Intel 82371AB PIIX4 IDE pci bus 0x0 cardnum 0x07 function 0x0002: vendor 0x8086 device 0x7112 Intel 82371AB PIIX4 USB pci bus 0x0 cardnum 0x07 function 0x0003: vendor 0x8086 device 0x7113 Intel 82371AB PIIX4 ACPI pci bus 0x0 cardnum 0x0e function 0x0000: vendor 0x1113 device 0x1211 Device unknown pci bus 0x0 cardnum 0x0f function 0x0000: vendor 0x1274 device 0x5000 Ensoniq AudioPCI pci bus 0x0 cardnum 0x10 function 0x0000: vendor 0x9004 device 0x8178 Adaptec 2940U/UW Probing for devices on PCI bus 1: pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x10de device 0x0020 NVidia Riva TNT -- Please use Reply-To: address for response. Joe Clarke, CE | | Customer Support Engineer ||||| ||||| Phone: (919) 472-2867 ..:|||||||||::|||||||||:.. Email: jclarke@cisco.com c i s c o S y s t e m s ---------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9906110254120.423-100000>