Date: Mon, 31 Mar 2003 02:40:29 +0200 (=?ISO-8859-1?Q?Westeurop=E4ische_Sommerzeit?=) From: Friedemann Becker <Friedemann.Becker@student.uni-tuebingen.de> To: freebsd-current@freebsd.org Subject: Re: Problems with clock (fwd) Message-ID: <Pine.WNT.4.51.0303310240060.1800@chasey>
next in thread | raw e-mail | index | archive | help
---------- Forwarded message ---------- Date: Fri, 28 Mar 2003 23:18:35 +0100 (CET) From: Friedemann Becker <lucius@student.uni-tuebingen.de> To: Andris <andris@multicom.lv> Subject: Re: Problems with clock Try this one. I had the same problem, and de fix described put the clock back to normal operation. http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/32226 On Fri, 28 Mar 2003, Andris wrote: > Hi everyone! > > I have strange problems with my PC clock. Clock seems to be ~2 times faster. > > What's up? > > Andris > > Here is dmesg output: > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.0-RELEASE-p6 #0: Fri Mar 28 11:45:46 EET 2003 > root@mezhs.buts.lv:/usr/obj/usr/src/sys/MEZHS > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0407000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04070a8. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 333516074 Hz > CPU: AMD-K6(tm) 3D processor (333.52-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > AMD Features=0xffffffff80000800<SYSCALL,3DNow!> > real memory = 134152192 (127 MB) > avail memory = 125931520 (120 MB) > Initializing GEOMetry subsystem > K6-family MTRR support enabled (2 registers) > VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c4eeb (c0004eeb) > VESA: S3 Incorporated. 86C775/86C785 > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ALi_ > on motherboard > ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 > ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 > Using $PIR table, 6 entries at 0xc00f7c40 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-safe" frequency 3579545 Hz > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > acpi_cpu0: <CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Ali M1541 host to AGP bridge> mem 0xd0000000-0xd1ffffff at device 0.0 > on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <display, VGA> at device 8.0 (no driver attached) > rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem > 0xebfeff00-0xebfeffff irq 10 at device 9.0 on pci0 > rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect > mode > rl0: Ethernet address: 00:30:4f:16:8f:79 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdf80-0xdf9f irq 9 at device > 10.0 on pci0 > ed0: address 00:48:45:00:07:9e, type NE2000 (16 bit) > atapci0: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf at device > 15.0 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > acpi_button0: <Sleep Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > fdc0: cmd 3 failed at out byte 1 of 3 > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: cmd 3 failed at out byte 1 of 3 > orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > fdc0: cannot reserve I/O port range (6 ports) > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to > accept, logging unlimited > DUMMYNET initialized (011031) > IP Filter: v3.4.29 initialized. Default = pass all, Logging = enabled > acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% > ad0: 3098MB <ST33210A> [6296/16/63] at ata0-master UDMA33 > Mounting root from ufs:/dev/ad0s1a > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.WNT.4.51.0303310240060.1800>