Date: Fri, 2 Dec 2005 17:36:04 -0500 From: John Baldwin <jhb@freebsd.org> To: "Robert Faulds" <Robert.Faulds@voxify.com> Cc: freebsd-acpi@freebsd.org Subject: Re: Tyan Tiget S5351-i7322 hangs with ACPI (AMD64 or i386) Message-ID: <200512021736.05368.jhb@freebsd.org> In-Reply-To: <331CA3AB8A236A488C92DEC289C7D04D01642019@Deliverance.voxify.com> References: <331CA3AB8A236A488C92DEC289C7D04D01642019@Deliverance.voxify.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 02 December 2005 04:59 pm, Robert Faulds wrote: > That does indeed allow me to boot 6.0-RELEASE-x86 > http://xocolatl.com/rfaulds/freebsd-acpi/test1-dmesg-no-apic-verbose > > Bad assumption on my part that > root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC and > /sys/i386/conf/GENERIC were the same. Or is it loader.conf on the > release ISO that is different. They should be identical. I think that your machine doesn't have a valid MP Table, so the non-ACPI kernel isn't able to locate any APICs. > Doesn't a lack of APIC preclude running SMP? Can you suggest next steps > for me, please? Yes, it does, but it narrows down where the problems are. Can you try building an SMP kernel (GENERIC on 6.x doesn't include SMP by default) and seeing if it boots up ok? > Robert > > > > -----Original Message----- > From: John Baldwin [mailto:jhb@freebsd.org] > Sent: Friday, December 02, 2005 1:13 PM > To: freebsd-acpi@freebsd.org > Cc: Robert Faulds > Subject: Re: Tyan Tiget S5351-i7322 hangs with ACPI (AMD64 or i386) > > On Friday 02 December 2005 01:40 pm, Robert Faulds wrote: > > FreeBSD-AMD64 (Same behavior with i386) > > Tyan S5351 dual XEON > > 4GB RAM > > > > I can not boot this motherboard with acpi enabled. It consistently > > times-out while trying to attach disks to the controller. The stock > > controller is a LSI 1030 but with an Adaptec 2130SLP it hangs in the > > same place. > > > > I've tried 6.0-RELEASE, 6.0-STABLE(from Tuesday), and 5.4-STABLE with > > and without drives attached to the controllers. All exhibit the same > > behavior. > > I've posted a few dmesg's of various sorts. I'm currently building a > > kernel with ACPI-DEBUG an will post the results shortly. Any help is > > greatly appreciated. > > > > > > http://xocolatl.com/rfaulds/freebsd-acpi > > Well, one thing to note is that with ACPI you have APIC, but without > ACPI you > do not. Can you try just booting ACPI with APIC disabled > (hint.apic.0.disabled=1) to see if that fares better? You'll probably > need > to do that with a FreeBSD/i386 kernel for now. -- John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512021736.05368.jhb>