Date: Sun, 30 Mar 2008 23:56:25 +0400 From: "Victor M. Blood" <freebsd@masm.elcom.ru> To: Thierry Herbelot <thierry@herbelot.com>, freebsd-current@freebsd.org Subject: Re: FreeBSD Failures on Pentium E2180 with nForce nf-610i Chipset mb Asustek P5N-MX Message-ID: <736762496.20080330235625@masm.elcom.ru> In-Reply-To: <200803302135.39486.thierry@herbelot.com> References: <1431112639.20080330193955@masm.elcom.ru> <200803302049.43877.thierry@herbelot.com> <1905940611.20080330225526@masm.elcom.ru> <200803302135.39486.thierry@herbelot.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 30.03.2008, Thierry Herbelot wrote: > Le Sunday 30 March 2008, Victor M. Blood a ecrit : >> > >> > Hello, >> > >> > good news if the machine starts correctly ! >> > >> > the next step is finding the conditions when the machine does not start, >> > and get a verbose log. >> >> http://elcom.ru/~masm/boot-gsvh.log >> >> Problem with 2Gb of memory? WinXP startup and work correct. Without >> hw.physmem="1G" kernel don't start and no any log can be made. > then try other values : 1500Mb, .... to see where it stops > it is your machine, and you are the only one who can try different > combinations. > you say that the kernel does not start if you remove hw.physmem="1G" : maybe > the loader has troubles with the memory map from the BIOS ? hm, this MB has integrated video chip, may be memory size can't be correctly detected, thanks for idea. I set physmem to 1500M, 1700M, 1900M, kernel was started and devices probed. but then try 2G - system reboot after kernel priambula: Overlapping or non-monotonic memory region, ignoring second region Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Mar 28 01:02:20 MSK 2008 root@matrix:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. P === [reboot] I think with hw.physmem="1800M" it will work fine :), thanks for help. -- With all regards, Victor M. Blood. mailto: freebsd@masm.elcom.ru FTN: 2:5024/1.95@Fidonet.org, ICQ#3567656
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?736762496.20080330235625>