Date: Wed, 9 Dec 2009 12:04:07 -0800 From: "Li, Qing" <qing.li@bluecoat.com> To: "Mario Pavlov" <freebsd@abv.bg>, <freebsd-stable@freebsd.org>, <freebsd-current@freebsd.org> Subject: RE: proxy arp and MPD in RELENG_8 Message-ID: <B583FBF374231F4A89607B4D08578A4304673741@bcs-mail03.internal.cacheflow.com> References: <1005992950.59541.1260385306946.JavaMail.apache@mail53.abv.bg>
next in thread | previous in thread | raw e-mail | index | archive | help
Let me look into this issue and work with you offline.
I have been quite busy with day job and just starting to slowly
resume my FreeBSD work.
-- Qing
-----Original Message-----
From: owner-freebsd-stable@freebsd.org on behalf of Mario Pavlov
Sent: Wed 12/9/2009 11:01 AM
To: freebsd-stable@freebsd.org; freebsd-current@freebsd.org
Subject: proxy arp and MPD in RELENG_8
=20
Hi,
some time ago I noticed that there's a problem with the new arp =
implementation - proxy arp was somehow not working when mpd is involved. =
I decided to try this out again assuming it was fixed for the =
release...unfortunately the problem is still there...
Here are the last few lines of the mpd output:
[B-1] IPCP: state change Ack-Rcvd --> Opened
[B-1] IPCP: LayerUp
[B-1] 192.168.10.1 -> 192.168.10.50
[B-1] IFACE: Connecting tcpmssfix
[B-1] IFACE: Add address 192.168.10.1/32->192.168.10.50 to ng0
[B-1] exec: /usr/sbin/arp -S 192.168.10.50 0:e0:28:62:e:9 pub
[B-1] system: command "/usr/sbin/arp" returned 256
[B-1] IFACE: Up event
[B-1] IFACE: idle-timeout: 1800 seconds
[B-1] IFACE: Change interface flags: -0 +1
there this is mpd.conf:
startup:
default:
load pptp_server
pptp_server:
set ippool add pool1 192.168.10.50 192.168.10.99
create bundle template B
set iface enable proxy-arp
log +iface2
set iface idle 1800
set iface enable tcpmssfix
set ipcp yes vjcomp
set ipcp ranges 192.168.10.1/32 ippool pool1
set ipcp dns 192.168.10.1
set bundle enable compression
set ccp yes mppc
set mppc yes e40
set mppc yes e128
set mppc yes stateless
create link template L pptp
set link action bundle B
set link enable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set link mtu 1460
set pptp self pub.ip.add.res
set link enable incoming
this is probably the most common VPN setup and it was working fine with =
7.2-STABLE but after I upgraded to 8-STABLE it broke up...
Is there a workaround or a plan to fix this? Or should I just go back to =
RELENG_7?
thank you.
P.S. this is discussed in the forums as well: =
http://forums.freebsd.org/showthread.php?t=3D8427
-----------------------------------------------------------------
???????? ? ?????? ???????? ?? iZone.bg ? ??????? ???? ?? 5?? ??????? =
Acer!
http://www.izone.bg/6/index.html
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to =
"freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B583FBF374231F4A89607B4D08578A4304673741>