Date: Tue, 5 Feb 2008 08:30:26 -0500 From: "Matt Emmerton" <matt@gsicomp.on.ca> To: <freebsd-stable@freebsd.org> Subject: ATA/boot problems with 6.2-release and 7-prerelease Message-ID: <004901c867fb$44b08350$1200a8c0@hermes>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0046_01C867D1.5B90A110
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Content-Transfer-Encoding: 7bit
I have a 6.1-release machine that I wanted to upgrade, so I decided I would
upgrade to 6.2-rel, and then to 7-pre.
When I upgraded to 6.2-rel, it fails at mountroot, claiming that it can't
find ad0s1a to boot from. (Entering ? to list all available boot devices
only lists acd0 and ad2*, which are secondary master/slave. It doesn't list
anything on ad0 or ad1 which are primary master/slave.) The same thing
happens on 7-pre.
All installations are using GENERIC kernel. Booting from CD and going into
fixit mode works fine - I can see all filesystems on all disks.
I've tried swapping primary/secondary as well as swapping cables, but the
problem persists.
I've attached the dmesg from 6.1. Both 6.2 and 7-pre have the following
text in the dmesg numerous times for ata0.
ata0: reiniting channel ..
ata0: reset tp1 mask=0x ostat0=58 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
I see this a couple of times for ata1 as well, but the stat1 line is
different and we end up detecting ad2/acd0 which are on ata1.
Any ideas?
--
Matt Emmerton
------=_NextPart_000_0046_01C867D1.5B90A110
Content-Type: application/octet-stream;
name="dmesg.61generic"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.61generic"
Copyright (c) 1992-2006 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006=0A=
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC=0A=
Preloaded elf kernel "/boot/kernel.61GENERIC/kernel" at 0xc0afe000.=0A=
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0afe18c.=0A=
link_elf: symbol rman_is_region_manager undefined=0A=
KLD file acpi.ko - could not finalize loading=0A=
Calibrating clock(s) ... i8254 clock: 1193325 Hz=0A=
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A=
Timecounter "i8254" frequency 1193182 Hz quality 0=0A=
Calibrating TSC clock ... TSC clock: 1699952540 Hz=0A=
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1699.95-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0xf13 Stepping =3D 3=0A=
=
Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>=0A=
real memory =3D 234815488 (223 MB)=0A=
Physical memory chunk(s):=0A=
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)=0A=
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)=0A=
0x0000000000c25000 - 0x000000000dbc7fff, 217722880 bytes (53155 pages)=0A=
avail memory =3D 220291072 (210 MB)=0A=
MP Configuration Table version 1.4 found at 0xc00f1400=0A=
APIC: Using the MPTable enumerator.=0A=
MPTable: <OEM00000 PROD00000000>=0A=
bios32: Found BIOS32 Service Directory header at 0xc00fae80=0A=
bios32: Entry =3D 0xfb2f0 (c00fb2f0) Rev =3D 0 Len =3D 1=0A=
pcibios: PCI BIOS entry at 0xf0000+0xb340=0A=
pnpbios: Found PnP BIOS data at 0xc00fbd70=0A=
pnpbios: Entry =3D f0000:bda0 Rev =3D 1.0=0A=
Other BIOS signatures found:=0A=
ioapic0: Changing APIC ID to 2=0A=
ioapic0: Assuming intbase of 0=0A=
ioapic0: Routing external 8259A's -> intpin 0=0A=
ioapic0: intpin 0 -> ExtINT (edge, high)=0A=
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)=0A=
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)=0A=
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)=0A=
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)=0A=
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)=0A=
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)=0A=
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)=0A=
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)=0A=
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)=0A=
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)=0A=
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)=0A=
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)=0A=
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)=0A=
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)=0A=
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)=0A=
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)=0A=
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)=0A=
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)=0A=
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)=0A=
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)=0A=
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)=0A=
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)=0A=
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)=0A=
ioapic0: intpin 20 bus PCI=0A=
ioapic0: intpin 20 trigger: level=0A=
ioapic0: intpin 20 polarity: low=0A=
ioapic0: intpin 21 bus PCI=0A=
ioapic0: intpin 21 trigger: level=0A=
ioapic0: intpin 21 polarity: low=0A=
ioapic0: intpin 22 bus PCI=0A=
ioapic0: intpin 22 trigger: level=0A=
ioapic0: intpin 22 polarity: low=0A=
ioapic0: intpin 23 bus PCI=0A=
ioapic0: intpin 23 trigger: level=0A=
ioapic0: intpin 23 polarity: low=0A=
ioapic0: intpin 18 bus PCI=0A=
ioapic0: intpin 18 trigger: level=0A=
ioapic0: intpin 18 polarity: low=0A=
ioapic0: intpin 16 bus PCI=0A=
ioapic0: intpin 16 trigger: level=0A=
ioapic0: intpin 16 polarity: low=0A=
ioapic0: intpin 19 bus PCI=0A=
ioapic0: intpin 19 trigger: level=0A=
ioapic0: intpin 19 polarity: low=0A=
ioapic0: intpin 1 bus ISA=0A=
ioapic0: intpin 1 trigger: edge=0A=
ioapic0: intpin 1 polarity: high=0A=
ioapic0: intpin 2 bus ISA=0A=
ioapic0: Routing IRQ 0 -> intpin 2=0A=
ioapic0: intpin 2 trigger: edge=0A=
ioapic0: intpin 2 polarity: high=0A=
ioapic0: intpin 3 bus ISA=0A=
ioapic0: intpin 3 trigger: edge=0A=
ioapic0: intpin 3 polarity: high=0A=
ioapic0: intpin 4 bus ISA=0A=
ioapic0: intpin 4 trigger: edge=0A=
ioapic0: intpin 4 polarity: high=0A=
ioapic0: intpin 6 bus ISA=0A=
ioapic0: intpin 6 trigger: edge=0A=
ioapic0: intpin 6 polarity: high=0A=
ioapic0: intpin 7 bus ISA=0A=
ioapic0: intpin 7 trigger: edge=0A=
ioapic0: intpin 7 polarity: high=0A=
ioapic0: intpin 8 bus ISA=0A=
ioapic0: intpin 8 trigger: edge=0A=
ioapic0: intpin 8 polarity: high=0A=
ioapic0: intpin 12 bus ISA=0A=
ioapic0: intpin 12 trigger: edge=0A=
ioapic0: intpin 12 polarity: high=0A=
ioapic0: intpin 13 bus ISA=0A=
ioapic0: intpin 13 trigger: edge=0A=
ioapic0: intpin 13 polarity: high=0A=
ioapic0: intpin 14 bus ISA=0A=
ioapic0: intpin 14 trigger: edge=0A=
ioapic0: intpin 14 polarity: high=0A=
ioapic0: intpin 15 bus ISA=0A=
ioapic0: intpin 15 trigger: edge=0A=
ioapic0: intpin 15 polarity: high=0A=
ioapic0: Routing SMI -> intpin 23=0A=
lapic: Routing ExtINT -> LINT0=0A=
lapic: Routing NMI -> LINT1=0A=
ioapic0 <Version 1.4> irqs 0-23 on motherboard=0A=
cpu0 BSP:=0A=
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A=
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff=0A=
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000=0A=
wlan: <802.11 Link Layer>=0A=
null: <null device, zero device>=0A=
random: <entropy source, Software, Yarrow>=0A=
nfslock: pseudo-device=0A=
io: <I/O>=0A=
kbd: new array size 4=0A=
kbd1 at kbdmux0=0A=
mem: <memory>=0A=
Pentium Pro MTRR support enabled=0A=
rr232x: RocketRAID 232x controller driver v1.02 (May 7 2006 04:32:33)=0A=
npx0: INT 16 interface=0A=
cpu0 on motherboard=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there =
(id=3D06511039)=0A=
pcibios: BIOS version 2.10=0A=
Found $PIR table, 6 entries at 0xc00fde70=0A=
PCI-Only Interrupts: 5 9 10 11=0A=
Location Bus Device Pin Link IRQs=0A=
slot 1 0 11 A 0x03 3 4 5 6 7 9 10 11 14 15=0A=
slot 1 0 11 B 0x04 3 4 5 6 7 9 10 11 14 15=0A=
slot 1 0 11 C 0x01 3 4 5 6 7 9 10 11 14 15=0A=
slot 1 0 11 D 0x02 3 4 5 6 7 9 10 11 14 15=0A=
slot 2 0 9 A 0x02 3 4 5 6 7 9 10 11 14 15=0A=
slot 2 0 9 B 0x03 3 4 5 6 7 9 10 11 14 15=0A=
slot 2 0 9 C 0x04 3 4 5 6 7 9 10 11 14 15=0A=
slot 2 0 9 D 0x01 3 4 5 6 7 9 10 11 14 15=0A=
slot 3 0 13 A 0x04 3 4 5 6 7 9 10 11 14 15=0A=
slot 3 0 13 B 0x01 3 4 5 6 7 9 10 11 14 15=0A=
slot 3 0 13 C 0x02 3 4 5 6 7 9 10 11 14 15=0A=
slot 3 0 13 D 0x03 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 1 D 0x04 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 2 A 0x01 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 2 B 0x02 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 2 C 0x03 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 2 D 0x04 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 3 A 0x05 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 3 B 0x06 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 3 C 0x07 3 4 5 6 7 9 10 11 14 15=0A=
embedded 0 3 D 0x08 3 4 5 6 7 9 10 11 14 15=0A=
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pci0: physical bus=3D0=0A=
found-> vendor=3D0x1039, dev=3D0x0651, revid=3D0x01=0A=
bus=3D0, slot=3D0, func=3D0=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x2210, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
map[10]: type 1, range 32, base e8000000, size 26, enabled=0A=
found-> vendor=3D0x1039, dev=3D0x0001, revid=3D0x00=0A=
bus=3D0, slot=3D1, func=3D0=0A=
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0A=
cmdreg=3D0x0107, statreg=3D0x0000, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x40 (1920 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns)=0A=
found-> vendor=3D0x1039, dev=3D0x0008, revid=3D0x04=0A=
bus=3D0, slot=3D2, func=3D0=0A=
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x000f, statreg=3D0x0200, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
found-> vendor=3D0x1039, dev=3D0x5513, revid=3D0x00=0A=
bus=3D0, slot=3D2, func=3D5=0A=
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0005, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x80 (3840 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D14=0A=
powerspec 2 supports D0 D1 D3 current D0=0A=
map[20]: type 4, range 32, base 00004000, size 4, enabled=0A=
pcib0: unable to route slot 2 INTA=0A=
found-> vendor=3D0x1039, dev=3D0x7012, revid=3D0xa0=0A=
bus=3D0, slot=3D2, func=3D7=0A=
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x34 (13000 ns), maxlat=3D0x0b (2750 =
ns)=0A=
intpin=3Dc, irq=3D5=0A=
powerspec 2 supports D0 D1 D2 D3 current D0=0A=
map[10]: type 4, range 32, base 0000d800, size 8, enabled=0A=
map[14]: type 4, range 32, base 0000dc00, size 7, enabled=0A=
pcib0: slot 2 INTC routed to irq 18=0A=
found-> vendor=3D0x1039, dev=3D0x7001, revid=3D0x0f=0A=
bus=3D0, slot=3D3, func=3D0=0A=
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D8 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns)=0A=
intpin=3Da, irq=3D5=0A=
map[10]: type 1, range 32, base ec124000, size 12, enabled=0A=
pcib0: slot 3 INTA routed to irq 20=0A=
found-> vendor=3D0x1039, dev=3D0x7001, revid=3D0x0f=0A=
bus=3D0, slot=3D3, func=3D1=0A=
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D8 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns)=0A=
intpin=3Db, irq=3D10=0A=
map[10]: type 1, range 32, base ec120000, size 12, enabled=0A=
pcib0: slot 3 INTB routed to irq 21=0A=
found-> vendor=3D0x1039, dev=3D0x7001, revid=3D0x0f=0A=
bus=3D0, slot=3D3, func=3D2=0A=
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D8 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns)=0A=
intpin=3Dc, irq=3D11=0A=
map[10]: type 1, range 32, base ec121000, size 12, enabled=0A=
pcib0: slot 3 INTC routed to irq 22=0A=
found-> vendor=3D0x1039, dev=3D0x7002, revid=3D0x00=0A=
bus=3D0, slot=3D3, func=3D3=0A=
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D8 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns)=0A=
intpin=3Dd, irq=3D9=0A=
powerspec 2 supports D0 D3 current D0=0A=
map[10]: type 1, range 32, base ec122000, size 12, enabled=0A=
pcib0: slot 3 INTD routed to irq 258=0A=
found-> vendor=3D0x1039, dev=3D0x0900, revid=3D0x91=0A=
bus=3D0, slot=3D4, func=3D0=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x34 (13000 ns), maxlat=3D0x0b (2750 =
ns)=0A=
intpin=3Da, irq=3D11=0A=
powerspec 2 supports D0 D1 D2 D3 current D0=0A=
map[10]: type 4, range 32, base 0000e000, size 8, enabled=0A=
map[14]: type 1, range 32, base ec123000, size 12, enabled=0A=
pcib0: slot 4 INTA routed to irq 19=0A=
agp0: <SiS 651 host to AGP bridge> mem 0xe8000000-0xebffffff at device =
0.0 on pci0=0A=
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000=0A=
agp0: allocating GATT for aperture of size 64M=0A=
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0=0A=
pcib1: secondary bus 1=0A=
pcib1: subordinate bus 1=0A=
pcib1: I/O decode 0xc000-0xcfff=0A=
pcib1: memory decode 0xec000000-0xec0fffff=0A=
pcib1: prefetched decode 0xe0000000-0xe7ffffff=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: physical bus=3D1=0A=
found-> vendor=3D0x1039, dev=3D0x6325, revid=3D0x00=0A=
bus=3D1, slot=3D0, func=3D0=0A=
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0003, statreg=3D0x02b0, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D10=0A=
powerspec 2 supports D0 D1 D2 D3 current D0=0A=
map[10]: type 3, range 32, base e0000000, size 27, enabled=0A=
pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good=0A=
map[14]: type 1, range 32, base ec000000, size 17, enabled=0A=
pcib1: (null) requested memory range 0xec000000-0xec01ffff: good=0A=
map[18]: type 4, range 32, base 0000c000, size 7, enabled=0A=
pcib1: (null) requested I/O range 0xc000-0xc07f: in range=0A=
pcib1: slot 0 INTA routed to irq 16=0A=
pci1: <display, VGA> at device 0.0 (no driver attached)=0A=
isab0: <PCI-ISA bridge> at device 2.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <SiS 962/963 UDMA133 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f irq 14 at device 2.5 =
on pci0=0A=
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4000=0A=
ata0: <ATA channel 0> on atapci0=0A=
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0=0A=
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6=0A=
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50=0A=
ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A=
ata0: stat1=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A=
ata0: reset tp2 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA_MASTER>=0A=
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 48=0A=
ata0: [MPSAFE]=0A=
ata1: <ATA channel 1> on atapci0=0A=
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170=0A=
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376=0A=
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00=0A=
ata1: stat0=3D0x80 err=3D0x80 lsb=3D0x80 msb=3D0x80=0A=
ata1: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A=
ata1: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0A=
ata1: reset tp2 stat0=3D50 stat1=3D00 =
devices=3D0x9<ATAPI_SLAVE,ATA_MASTER>=0A=
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 49=0A=
ata1: [MPSAFE]=0A=
pci0: <multimedia, audio> at device 2.7 (no driver attached)=0A=
ohci0: <SiS 5571 USB controller> mem 0xec124000-0xec124fff irq 20 at =
device 3.0 on pci0=0A=
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xec124000=0A=
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50=0A=
ohci0: [GIANT-LOCKED]=0A=
usb0: OHCI version 1.0, legacy support=0A=
usb0: <SiS 5571 USB controller> on ohci0=0A=
usb0: USB revision 1.0=0A=
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
ohci1: <SiS 5571 USB controller> mem 0xec120000-0xec120fff irq 21 at =
device 3.1 on pci0=0A=
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xec120000=0A=
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 51=0A=
ohci1: [GIANT-LOCKED]=0A=
usb1: OHCI version 1.0, legacy support=0A=
usb1: <SiS 5571 USB controller> on ohci1=0A=
usb1: USB revision 1.0=0A=
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
ohci2: <SiS 5571 USB controller> mem 0xec121000-0xec121fff irq 22 at =
device 3.2 on pci0=0A=
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xec121000=0A=
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 52=0A=
ohci2: [GIANT-LOCKED]=0A=
usb2: OHCI version 1.0, legacy support=0A=
usb2: <SiS 5571 USB controller> on ohci2=0A=
usb2: USB revision 1.0=0A=
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xec122000-0xec122fff irq =
258 at device 3.3 on pci0=0A=
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xec122000=0A=
ehci0: Could not allocate irq=0A=
device_attach: ehci0 attach returned 6=0A=
sis0: <SiS 900 10/100BaseTX> port 0xe000-0xe0ff mem =
0xec123000-0xec123fff irq 19 at device 4.0 on pci0=0A=
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000=0A=
miibus0: <MII bus> on sis0=0A=
rlphy0: <RTL8201L 10/100 media interface> on miibus0=0A=
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
sis0: bpf attached=0A=
sis0: Ethernet address: 00:01:80:34:65:56=0A=
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53=0A=
sis0: [MPSAFE]=0A=
ex_isa_identify()=0A=
ata: ata0 already exists; skipping it=0A=
ata: ata1 already exists; skipping it=0A=
pnp_identify: Trying Read_Port at 203=0A=
pnp_identify: Trying Read_Port at 243=0A=
pnp_identify: Trying Read_Port at 283=0A=
pnp_identify: Trying Read_Port at 2c3=0A=
pnp_identify: Trying Read_Port at 303=0A=
pnp_identify: Trying Read_Port at 343=0A=
pnp_identify: Trying Read_Port at 383=0A=
pnp_identify: Trying Read_Port at 3c3=0A=
PNP Identify complete=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
pnpbios: 15 devices, largest 102 bytes=0A=
PNP0200: adding dma mask 0x10=0A=
PNP0200: adding io range 0-0xf, size=3D0x10, align=3D0=0A=
PNP0200: adding io range 0x81-0x83, size=3D0x3, align=3D0=0A=
PNP0200: adding io range 0x87-0x87, size=3D0x1, align=3D0=0A=
PNP0200: adding io range 0x89-0x8b, size=3D0x3, align=3D0=0A=
PNP0200: adding io range 0x8f-0x91, size=3D0x3, align=3D0=0A=
PNP0200: adding io range 0xc0-0xdf, size=3D0x20, align=3D0=0A=
pnpbios: handle 1 device ID PNP0200 (0002d041)=0A=
PNP0100: adding irq mask 0x1=0A=
PNP0100: adding io range 0x40-0x43, size=3D0x4, align=3D0=0A=
pnpbios: handle 2 device ID PNP0100 (0001d041)=0A=
PNP0b00: adding irq mask 0x100=0A=
PNP0b00: adding io range 0x70-0x71, size=3D0x2, align=3D0=0A=
pnpbios: handle 3 device ID PNP0b00 (000bd041)=0A=
PNP0303: adding irq mask 0x2=0A=
PNP0303: adding io range 0x60-0x60, size=3D0x1, align=3D0=0A=
PNP0303: adding io range 0x64-0x64, size=3D0x1, align=3D0=0A=
pnpbios: handle 4 device ID PNP0303 (0303d041)=0A=
PNP0800: adding io range 0x61-0x61, size=3D0x1, align=3D0=0A=
pnpbios: handle 5 device ID PNP0800 (0008d041)=0A=
PNP0c04: adding irq mask 0x2000=0A=
PNP0c04: adding io range 0xf0-0xff, size=3D0x10, align=3D0=0A=
pnpbios: handle 6 device ID PNP0c04 (040cd041)=0A=
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000=0A=
PNP0c01: adding fixed memory32 range 0x20000000-0x203fffff, =
size=3D0x400000=0A=
PNP0c01: adding fixed memory32 range 0xffee0000-0xffefffff, =
size=3D0x20000=0A=
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, =
size=3D0x20000=0A=
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, =
size=3D0x10000=0A=
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, =
size=3D0x10000=0A=
PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=3D0xf00000=0A=
pnpbios: handle 7 device ID PNP0c01 (010cd041)=0A=
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=3D0x4000=0A=
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=3D0x4000=0A=
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=3D0x4000=0A=
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=3D0x4000=0A=
pnpbios: handle 8 device ID PNP0c02 (020cd041)=0A=
PNP0a03: adding io range 0x290-0x29f, size=3D0x10, align=3D0=0A=
PNP0a03: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0=0A=
PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0=0A=
pnpbios: handle 9 device ID PNP0a03 (030ad041)=0A=
PNP0c02: adding io range 0x1000-0x107f, size=3D0x80, align=3D0=0A=
PNP0c02: adding io range 0x10c0-0x10df, size=3D0x20, align=3D0=0A=
pnpbios: handle 11 device ID PNP0c02 (020cd041)=0A=
PNP0501: adding irq mask 0x10=0A=
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0=0A=
pnpbios: handle 12 device ID PNP0501 (0105d041)=0A=
PNP0700: adding dma mask 0x4=0A=
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0=0A=
PNP0700: adding io range 0x3f7-0x3f7, size=3D0x1, align=3D0=0A=
PNP0700: adding irq mask 0x40=0A=
pnpbios: handle 13 device ID PNP0700 (0007d041)=0A=
PNP0401: adding dma mask 0x8=0A=
PNP0401: adding irq mask 0x80=0A=
PNP0401: adding io range 0x378-0x37f, size=3D0x8, align=3D0=0A=
PNP0401: adding io range 0x778-0x77f, size=3D0x8, align=3D0=0A=
pnpbios: handle 15 device ID PNP0401 (0104d041)=0A=
PNP0501: adding irq mask 0x8=0A=
PNP0501: adding io range 0x2f8-0x2ff, size=3D0x8, align=3D0=0A=
pnpbios: handle 16 device ID PNP0501 (0105d041)=0A=
ahc_isa_probe 13: ioport 0xdc00 alloc failed=0A=
sc: sc0 already exists; skipping it=0A=
vga: vga0 already exists; skipping it=0A=
isa_probe_children: disabling PnP devices=0A=
isa_probe_children: probing non-PnP devices=0A=
pmtimer0 on isa0=0A=
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0=0A=
adv0: not probed (disabled)=0A=
aha0: not probed (disabled)=0A=
aic0: not probed (disabled)=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0A=
atkbd: the current kbd controller command byte 0047=0A=
atkbd: keyboard ID 0x41ab (2)=0A=
kbd0 at atkbd0=0A=
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000=0A=
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54=0A=
atkbd0: [GIANT-LOCKED]=0A=
psm0: current command byte:0047=0A=
psm0: strange result for test aux port (1).=0A=
psm0: failed to reset the aux device.=0A=
bt0: not probed (disabled)=0A=
cs0: not probed (disabled)=0A=
ed0: not probed (disabled)=0A=
fdc0: ic_type 90 part_id 80=0A=
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 =
on isa0=0A=
fdc0: ic_type 90 part_id 80=0A=
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55=0A=
fdc0: [MPSAFE]=0A=
fdc0: [FAST]=0A=
fe0: not probed (disabled)=0A=
ie0: not probed (disabled)=0A=
lnc0: not probed (disabled)=0A=
ppc0: parallel port found at 0x378=0A=
ppc0: using extended I/O port range=0A=
ppc0: ECP SPP SPP=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/16 bytes threshold=0A=
ppbus0: <Parallel port bus> on ppc0=0A=
plip0: <PLIP network interface> on ppbus0=0A=
plip0: bpf attached=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 56=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)=0A=
sio0: irq maps: 0x81 0x91 0x81 0x81=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57=0A=
sio1: irq maps: 0x81 0x89 0x81 0x81=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58=0A=
sio2: not probed (disabled)=0A=
sio3: not probed (disabled)=0A=
sn0: not probed (disabled)=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
vt0: not probed (disabled)=0A=
isa_probe_children: probing PnP devices=0A=
unknown: <PNP0303> can't assign resources (port)=0A=
unknown: <PNP0303> at port 0x60 on isa0=0A=
unknown: <PNP0800> failed to probe at port 0x61 on isa0=0A=
unknown: <PNP0c01> can't assign resources (memory)=0A=
unknown: <PNP0c01> at iomem =
0-0x9ffff,0x20000000-0x203fffff,0xffee0000-0xffefffff on isa0=0A=
unknown: <PNP0501> can't assign resources (port)=0A=
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0=0A=
unknown: <PNP0700> can't assign resources (port)=0A=
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0=0A=
unknown: <PNP0401> can't assign resources (port)=0A=
unknown: <PNP0401> at port 0x378-0x37f on isa0=0A=
unknown: <PNP0501> can't assign resources (port)=0A=
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0=0A=
Device configuration finished.=0A=
procfs registered=0A=
lapic: Divisor 2, Frequency 49998542 hz=0A=
Timecounter "TSC" frequency 1699952540 Hz quality 800=0A=
Timecounters tick every 1.000 msec=0A=
lo0: bpf attached=0A=
rr232x: no controller detected.=0A=
fdc0: output ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: output ready timeout=0A=
ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire=0A=
ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire=0A=
ad0: setting PIO4 on 5513 chip=0A=
ad0: setting UDMA33 on 5513 chip=0A=
ad0: 6187MB <FUJITSU MPC3064AT 6018> at ata0-master UDMA33=0A=
ad0: 12672450 sectors [13410C/15H/63S] 16 sectors/interrupt 1 depth queue=0A=
GEOM: new disk ad0=0A=
ad0: Silicon Integrated Systems check1 failed=0A=
ad0: Adaptec check1 failed=0A=
ad0: LSI (v3) check1 failed=0A=
ad0: LSI (v2) check1 failed=0A=
ad0: FreeBSD check1 failed=0A=
ad1: setting PIO4 on 5513 chip=0A=
ad1: setting UDMA100 on 5513 chip=0A=
ad1: 19092MB <WDC WD200BB-32CXA0 02.05B02> at ata0-slave UDMA100=0A=
ad1: 39102336 sectors [38792C/16H/63S] 16 sectors/interrupt 1 depth queue=0A=
ad1: Silicon Integrated Systems check1 failed=0A=
ad1: Adaptec check1 failed=0A=
ad1: LSI (v3) check1 failed=0A=
ad1: LSI (v2) check1 failed=0A=
ad1: FreeBSD check1 failed=0A=
ata1-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire=0A=
ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire=0A=
ad2: setting PIO4 on 5513 chip=0A=
ad2: setting UDMA100 on 5513 chip=0A=
ad2: 38166MB <Seagate ST340016A 3.19> at ata1-master UDMA100=0A=
ad2: 78165360 sectors [77545C/16H/63S] 16 sectors/interrupt 1 depth queue=0A=
ad2: Silicon Integrated Systems check1 failed=0A=
ad2: Adaptec check1 failed=0A=
ad2: LSI (v3) check1 failed=0A=
ad2: LSI (v2) check1 failed=0A=
ad2: FreeBSD check1 failed=0A=
acd0: setting PIO4 on 5513 chip=0A=
acd0: setting UDMA33 on 5513 chip=0A=
GEOM: new disk ad1=0A=
GEOM: new disk ad2=0A=
acd0: <HL-DT-STDVD-ROM GDR8164B/0L06> DVDROM drive at ata1 as slave=0A=
acd0: read 8958KB/s (8958KB/s), 256KB buffer, UDMA33=0A=
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet=0A=
acd0: Writes:=0A=
acd0: Audio: play, 256 volume levels=0A=
acd0: Mechanism: ejectable tray, unlocked=0A=
acd0: Medium: no/blank disc=0A=
ATA PseudoRAID loaded=0A=
Trying to mount root from ufs:/dev/ad0s1a=0A=
start_init: trying /sbin/init=0A=
fdc0: output ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: output ready timeout=0A=
fdc0: input ready timeout=0A=
fdc0: input ready timeout=0A=
link_elf: symbol _vn_lock undefined=0A=
------=_NextPart_000_0046_01C867D1.5B90A110--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004901c867fb$44b08350$1200a8c0>