Date: Fri, 25 Dec 2015 09:44:16 +0200 From: Daniel Braniss <danny@cs.huji.ac.il> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: rpi wifi/wlan0 stopped working Message-ID: <F2960E19-C98F-41FC-B558-229EAB0C7E89@cs.huji.ac.il> In-Reply-To: <CAJ-Vmok7dtVfN8KUCf-ydWXJXg1hhnm63%2BX-494Bp9RQ-qx3wg@mail.gmail.com> References: <2FD9A764-9F86-4DF1-B8F8-964678BFC21D@cs.huji.ac.il> <CAJ-Vmok7dtVfN8KUCf-ydWXJXg1hhnm63%2BX-494Bp9RQ-qx3wg@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
> On 24 Dec 2015, at 16:47, Adrian Chadd <adrian.chadd@gmail.com> wrote: > > try 'sysctl net.wlan.devices' ; see if urtwn0 shows up. > > Newer -head removed the need for the hardware interface in ifconfig, > as it's not used. > ok, it shows up. net.wlan.hwmp.inact: 5000 net.wlan.hwmp.rootconfint: 2000 net.wlan.hwmp.rannint: 1000 net.wlan.hwmp.rootint: 2000 net.wlan.hwmp.roottimeout: 5000 net.wlan.hwmp.net_diameter_traversal_time: 510 net.wlan.hwmp.maxpreq_retries: 30 net.wlan.hwmp.pathlifetime: 5000 net.wlan.hwmp.targetonly: 0 net.wlan.addba_maxtries: 3 net.wlan.addba_backoff: 10000 net.wlan.addba_timeout: 250 net.wlan.recv_bar: 1 net.wlan.mesh.maxholding: 2 net.wlan.mesh.maxretries: 2 net.wlan.mesh.backofftimeout: 5000 net.wlan.mesh.confirmtimeout: 40 net.wlan.mesh.holdingtimeout: 40 net.wlan.mesh.retrytimeout: 40 net.wlan.mesh.gateint: 10000 net.wlan.cac_timeout: 60 net.wlan.nol_timeout: 1800 net.wlan.devices: urtwn0 something must have changed in the startup, since I can not get wlan0 started. i have in /boot/loader.conf wlan_xauth_load=“YES” in /etc/rc.conf wlans_urtwn0=wlan0 ifconfig_wlan0=“WPA SYNCDHCP” cheers and season greetings danny > > -a > > > On 24 December 2015 at 06:34, Daniel Braniss <danny@cs.huji.ac.il> wrote: >> with an older current, my rpi sees the wifi, and it actually works, >> with a more resent current, ifconfig does not show it. >> >> when I take out the dongle: >> root@:~ # ugen0.4: <Realtek> at usbus0 (disconnected) >> urtwn0: at uhub1, port 4, addr 4 (disconnected) >> >> when I re insert it: >> >> ugen0.4: <Realtek> at usbus0 >> urtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on usbus0 >> urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R >> >> but: >> >> root@:~ # ifconfig >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> >> inet6 ::1 prefixlen 128 >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 >> inet 127.0.0.1 netmask 0xff000000 >> groups: lo >> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >> ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> options=80001<RXCSUM,LINKSTATE> >> ether b8:27:eb:8e:39:ef >> media: Ethernet autoselect (none) >> status: no carrier >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> >> no wlan0, nada >> >> any idea what I’m missing? >> >> cheers, >> danny >> >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F2960E19-C98F-41FC-B558-229EAB0C7E89>