Date: Tue, 31 Mar 1998 10:53:43 +0200 From: Eivind Eklund <eivind@yes.no> To: cjb@efn.org Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: x11amp-libc5 and setup() not implemented? Message-ID: <19980331105343.28848@follo.net> In-Reply-To: <Pine.BSF.3.96.980330212353.331A-100000@person.dyn.ml.org>; from Chris Brunner on Mon, Mar 30, 1998 at 09:26:57PM -0800 References: <Pine.BSF.3.96.980330210402.25417L-100000@gdi.uoregon.edu> <Pine.BSF.3.96.980330212353.331A-100000@person.dyn.ml.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 30, 1998 at 09:26:57PM -0800, Chris Brunner wrote: > Don't mean to contradict you, Doug, but I have my SB32 PnP working with > VOXWARE on -CURRENT and it works fine. I had it working under 2.2.5 and > 2.2.1 as well. I tested VoxWare under -current. First, it conflicted with the PnP in -current. So, I disabled that and re-compiled (which isn't a solution, as I hack PnP drivers from time to time, but in an attempt to see if I could get this stuff to work...) Afterwards, it loaded just fine, and probed my card just fine. However, it just didn't work - attempting to access /dev/dsp (major 30, minor 3) returned 'Unknown device', while some of the other devices (e.g, the mixer) seemed to work. This was contrary to the probe message, and contrary to what seemed obvious from the old VoxWare source. Messages to support@opensound.com with detailed descriptions of the problems and an offer of whatever help I could offer resulted in no reply. So, my experience is so far that people are best off using Luigi's drivers, unless they have a strange and desperate need for MIDI... Eivind. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980331105343.28848>