Date: Wed, 12 Aug 2020 16:47:56 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 248630] sesutil does not report all drives in an MSA60, locate LED is off by +1 Message-ID: <bug-248630-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D248630 Bug ID: 248630 Summary: sesutil does not report all drives in an MSA60, locate LED is off by +1 Product: Base System Version: 12.1-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Some People Priority: --- Component: bin Assignee: bugs@FreeBSD.org Reporter: mike@biesele.com On an HPE MSA60 fully populated with 12 SATA disks, sesutil map only shows = 11 disks. Possibly related, using 'sesutil locate' using either disk or sesid affects the wrong slot in the shelf by +1. That is, given disk da1 in phys= ical slot 1 in the shelf, 'sesutil locate da1 on' illuminates the locate LED in = slot 2. sas2ircu reports the shelf contents accurately, however.=20=20 System is an HPE ProLiant DL360p Gen8. HBA is an Avago LSI 2008 flashed wi= th the IT firmware.=20=20 Disks da1-da12 are in the MSA60.=20 library ~ # camcontrol devlist <HP RAID 1(1+0) OK> at scbus1 target 0 lun 0 (pass0,da0) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 31 lun 0 (pass1,da1) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 33 lun 0 (pass3,da3) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 34 lun 0 (pass4,da4) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 35 lun 0 (pass5,da5) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 36 lun 0 (da6,pass6) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 37 lun 0 (pass7,da7) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 38 lun 0 (pass8,da8) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 39 lun 0 (pass9,da9) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 40 lun 0 (pass10,da10) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 41 lun 0 (pass11,da11) <ATA WDC WD2000FYYZ-0 1K02> at scbus3 target 42 lun 0 (pass12,da12) <HP MSA60 2.18> at scbus3 target 43 lun 0 (ses0,pass13) <IBM-ESXS ST32000444SS BC29> at scbus3 target 44 lun 0 (da2,pass2) <hp DVD ROM UJ8C2 DC02> at scbus4 target 0 lun 0 (cd0,pass14) library ~ # sesutil map ses0: Enclosure Name: HP MSA60 2.18 Enclosure ID: 5001438001571280 Element 0, Type: Array Device Slot Status: Unsupported (0x00 0x00 0x00 0x00) Element 1, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Element 2, Type: Array Device Slot Status: OK (0x01 0x00 0x02 0x00) Device Names: da1,pass1 Extra status: - LED=3Dlocate Element 3, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da2,pass2 Element 4, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da3,pass3 Element 5, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da4,pass4 Element 6, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da5,pass5 Element 7, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da6,pass6 Element 8, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da7,pass7 Element 9, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da8,pass8 Element 10, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da9,pass9 Element 11, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da10,pass10 Element 12, Type: Array Device Slot Status: OK (0x01 0x00 0x00 0x00) Device Names: da11,pass11 Element 13, Type: Power Supply Status: Unsupported (0x00 0x00 0x00 0x00) Element 14, Type: Power Supply Status: OK (0x11 0x00 0x00 0x20) Extra status: - Swapped Element 15, Type: Power Supply Status: OK (0x11 0x00 0x00 0x20) Extra status: - Swapped Element 16, Type: Cooling Status: Unsupported (0x00 0x00 0x00 0x00) Extra status: - Speed: 0 rpm Element 17, Type: Cooling Status: OK (0x01 0x01 0xa4 0x21) Extra status: - Speed: 4200 rpm Element 18, Type: Cooling Status: OK (0x01 0x01 0x68 0x21) Extra status: - Speed: 3600 rpm Element 19, Type: Cooling Status: Unsupported (0x00 0x00 0x00 0x00) Extra status: - Speed: 0 rpm Element 20, Type: Cooling Status: OK (0x01 0x01 0x68 0x21) Extra status: - Speed: 3600 rpm Element 21, Type: Cooling Status: OK (0x01 0x01 0x68 0x21) Extra status: - Speed: 3600 rpm Element 22, Type: Temperature Sensors Status: Unsupported (0x00 0x00 0x00 0x00) Extra status: - Temperature: -reserved- Element 23, Type: Temperature Sensors Status: OK (0x01 0x00 0x2f 0x00) Extra status: - Temperature: 27 C Element 24, Type: Temperature Sensors Status: OK (0x01 0x00 0x2f 0x00) Extra status: - Temperature: 27 C Element 25, Type: Temperature Sensors Status: OK (0x01 0x00 0x2c 0x00) Extra status: - Temperature: 24 C Element 26, Type: Temperature Sensors Status: OK (0x01 0x00 0x2c 0x00) Extra status: - Temperature: 24 C Element 27, Type: Enclosure Services Controller Electronics Status: Unsupported (0x00 0x00 0x00 0x00) Element 28, Type: Enclosure Services Controller Electronics Status: OK (0x01 0x00 0x01 0x00) Element 29, Type: Enclosure Status: Unsupported (0x00 0x00 0x00 0x00) Element 30, Type: Enclosure Status: OK (0x01 0x00 0x00 0x00) Element 31, Type: SAS Expander Status: Unsupported (0x00 0x00 0x00 0x00) Element 32, Type: SAS Expander Status: OK (0x01 0x00 0x00 0x00) Element 33, Type: SAS Connector Status: Unsupported (0x00 0x00 0x00 0x00) Element 34, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 35, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 36, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 37, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 38, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 39, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 40, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 41, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 42, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 43, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 44, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 45, Type: SAS Connector Status: OK (0x01 0x20 0x01 0x00) Element 46, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 47, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 48, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 49, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 50, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 51, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 52, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 53, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 54, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 55, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 56, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 57, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 58, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 59, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 60, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 61, Type: SAS Connector Status: Unsupported (0x20 0x00 0x00 0x00) Extra status: - Disabled Element 62, Type: SAS Connector Status: OK (0x01 0x02 0x00 0x00) Element 63, Type: SAS Connector Status: OK (0x01 0x02 0x01 0x00) Element 64, Type: SAS Connector Status: OK (0x01 0x02 0x02 0x00) Element 65, Type: SAS Connector Status: OK (0x01 0x02 0x03 0x00) Element 66, Type: SAS Connector Status: OK (0x01 0x02 0x00 0x00) Element 67, Type: SAS Connector Status: OK (0x01 0x02 0x01 0x00) Element 68, Type: SAS Connector Status: OK (0x01 0x02 0x02 0x00) Element 69, Type: SAS Connector Status: OK (0x01 0x02 0x03 0x00) Element 70, Type: <Type 0x80> Status: Unsupported (0x00 0x00 0x00 0x00) Element 71, Type: <Type 0x80> Status: OK (0x01 0x20 0xff 0xff) library ~ # sas2ircu 1 display LSI Corporation SAS2 IR Configuration Utility. Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved. Read configuration has been initiated for controller 1 ------------------------------------------------------------------------ Controller information ------------------------------------------------------------------------ Controller type : SAS2008 BIOS version : 7.33.00.00 Firmware version : 20.00.07.00 Channel description : 1 Serial Attached SCSI Initiator ID : 0 Maximum physical devices : 255 Concurrent commands supported : 3432 Slot : 2 Segment : 0 Bus : 7 Device : 0 Function : 0 RAID Support : No ------------------------------------------------------------------------ IR Volume information ------------------------------------------------------------------------ ------------------------------------------------------------------------ Physical device information ------------------------------------------------------------------------ Initiator at ID #0 Device is a Enclosure services device Enclosure # : 2 Slot # : 0 SAS Address : 5001438-0-0157-12a5 State : Standby (SBY) Manufacturer : HP Model Number : MSA60 Firmware Revision : 2.18 Serial No : GUID : N/A Protocol : SAS Device Type : Enclosure services device Device is a Hard disk Enclosure # : 2 Slot # : 1 SAS Address : 5001438-0-0157-1281 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0054868 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 2 SAS Address : 5000c50-0-34cd-2731 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : IBM-ESXS Model Number : ST32000444SS Firmware Revision : BC29 Serial No : 9WM78S1V0428BC29 GUID : N/A Protocol : SAS Drive Type : SAS_HDD Device is a Hard disk Enclosure # : 2 Slot # : 3 SAS Address : 5001438-0-0157-1283 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0087547 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 4 SAS Address : 5001438-0-0157-1284 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0087107 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 5 SAS Address : 5001438-0-0157-1285 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0212052 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 6 SAS Address : 5001438-0-0157-1286 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0213822 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 7 SAS Address : 5001438-0-0157-1287 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0215894 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 8 SAS Address : 5001438-0-0157-1288 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0053015 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 9 SAS Address : 5001438-0-0157-1289 State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0053035 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 10 SAS Address : 5001438-0-0157-128a State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0116027 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 11 SAS Address : 5001438-0-0157-128b State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0115889 GUID : N/A Protocol : SATA Drive Type : SATA_HDD Device is a Hard disk Enclosure # : 2 Slot # : 12 SAS Address : 5001438-0-0157-128c State : Ready (RDY) Size (in MB)/(in sectors) : 1907729/3907029167 Manufacturer : ATA Model Number : WDC WD2000FYYZ-0 Firmware Revision : 1K02 Serial No : WDWMC1P0115969 GUID : N/A Protocol : SATA Drive Type : SATA_HDD ------------------------------------------------------------------------ Enclosure information ------------------------------------------------------------------------ Enclosure# : 1 Logical ID : 500605b0:0400cf00 Numslots : 8 StartSlot : 0 Enclosure# : 2 Logical ID : 50014380:01571280 Numslots : 13 StartSlot : 1 ------------------------------------------------------------------------ SAS2IRCU: Command DISPLAY Completed Successfully. SAS2IRCU: Utility Completed Successfully. library ~ # getencstat -v /dev/ses0 /dev/ses0: Enclosure Status <OK> Element 0x0: Array Device Slot, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x1: Array Device Slot, status: OK (0x01 0x00 0x00 0x00) Element 0x2: Array Device Slot, status: OK (0x01 0x00 0x02 0x00), dev: 'da1,pass1' Element 0x3: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da2,pass2' Element 0x4: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da3,pass3' Element 0x5: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da4,pass4' Element 0x6: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da5,pass5' Element 0x7: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da6,pass6' Element 0x8: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da7,pass7' Element 0x9: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da8,pass8' Element 0xa: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da9,pass9' Element 0xb: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da10,pass10' Element 0xc: Array Device Slot, status: OK (0x01 0x00 0x00 0x00), dev: 'da11,pass11' Element 0xd: Power Supply, status: Unsupported (0x00 0x00 0x00 0x00) Element 0xe: Power Supply, status: OK, Swapped (0x11 0x00 0x00 0x20) Element 0xf: Power Supply, status: OK, Swapped (0x11 0x00 0x00 0x20) Element 0x10: Cooling, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x11: Cooling, status: OK (0x01 0x01 0x68 0x21) Element 0x12: Cooling, status: OK (0x01 0x01 0x68 0x21) Element 0x13: Cooling, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x14: Cooling, status: OK (0x01 0x01 0x68 0x21) Element 0x15: Cooling, status: OK (0x01 0x01 0x68 0x21) Element 0x16: Temperature Sensors, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x17: Temperature Sensors, status: OK (0x01 0x00 0x2f 0x00) Element 0x18: Temperature Sensors, status: OK (0x01 0x00 0x2f 0x00) Element 0x19: Temperature Sensors, status: OK (0x01 0x00 0x2c 0x00) Element 0x1a: Temperature Sensors, status: OK (0x01 0x00 0x2c 0x00) Element 0x1b: Enclosure Services Controller Electronics, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x1c: Enclosure Services Controller Electronics, status: OK (0x01 0= x00 0x01 0x00) Element 0x1d: Enclosure, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x1e: Enclosure, status: OK (0x01 0x00 0x00 0x00) Element 0x1f: SAS Expander, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x20: SAS Expander, status: OK (0x01 0x00 0x00 0x00) Element 0x21: SAS Connector, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x22: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x23: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x24: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x25: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x26: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x27: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x28: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x29: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x2a: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x2b: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x2c: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x2d: SAS Connector, status: OK (0x01 0x20 0x01 0x00) Element 0x2e: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x2f: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x30: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x31: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x32: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x33: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x34: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x35: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x36: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x37: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x38: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x39: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x3a: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x3b: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x3c: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x3d: SAS Connector, status: Unsupported, Disabled (0x20 0x00 0x00 0x00) Element 0x3e: SAS Connector, status: OK (0x01 0x02 0x00 0x00) Element 0x3f: SAS Connector, status: OK (0x01 0x02 0x01 0x00) Element 0x40: SAS Connector, status: OK (0x01 0x02 0x02 0x00) Element 0x41: SAS Connector, status: OK (0x01 0x02 0x03 0x00) Element 0x42: SAS Connector, status: OK (0x01 0x02 0x00 0x00) Element 0x43: SAS Connector, status: OK (0x01 0x02 0x01 0x00) Element 0x44: SAS Connector, status: OK (0x01 0x02 0x02 0x00) Element 0x45: SAS Connector, status: OK (0x01 0x02 0x03 0x00) Element 0x46: <Type 0x80>, status: Unsupported (0x00 0x00 0x00 0x00) Element 0x47: <Type 0x80>, status: OK (0x01 0x20 0xff 0xff) library ~ # cat /var/run/dmesg.boot ---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE-p2 GENERIC amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2640 0 @ 2.50GHz (2494.05-MHz K8-class CPU) Origin=3D"GenuineIntel" Id=3D0x206d7 Family=3D0x6 Model=3D0x2d Steppi= ng=3D7 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,= MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =20 Features2=3D0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSS= E3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,O= SXSAVE,AVX> AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=3D0x1<LAHF> XSAVE Features=3D0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory =3D 68719476736 (65536 MB) avail memory =3D 66833526784 (63737 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 2 package(s) x 6 core(s) random: unblocking device. Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181213/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20181213/tbfadt-850) ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard Launching APs: 6 2 8 10 3 11 5 7 4 1 9 Timecounter "TSC-low" frequency 1247023495 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000023 [4335] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HP ProLiant> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> numa-domain 0 on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 mps0: <Avago Technologies (LSI) SAS2008> port 0x6000-0x60ff mem 0xf7ef0000-0xf7ef3fff,0xf7e80000-0xf7ebffff irq 26 at device 0.0 numa-domai= n 0 on pci1 mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> pcib2: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci0 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 bge0: <HP Ethernet 1Gb 4-port 331FLR Adapter, ASIC rev. 0x5719001> mem 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 numa-domain 0 on pci3 bge0: APE FW version: NCSI v1.4.12.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: <MII bus> numa-domain 0 on bge0 brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: 2c:44:fd:7b:59:5c bge1: <HP Ethernet 1Gb 4-port 331FLR Adapter, ASIC rev. 0x5719001> mem 0xf6bc0000-0xf6bcffff,0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 at device 0.1 numa-domain 0 on pci3 bge1: APE FW version: NCSI v1.4.12.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: <MII bus> numa-domain 0 on bge1 brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: 2c:44:fd:7b:59:5d bge2: <HP Ethernet 1Gb 4-port 331FLR Adapter, ASIC rev. 0x5719001> mem 0xf6b90000-0xf6b9ffff,0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 at device 0.2 numa-domain 0 on pci3 bge2: APE FW version: NCSI v1.4.12.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: <MII bus> numa-domain 0 on bge2 brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Using defaults for TSO: 65518/35/2048 bge2: Ethernet address: 2c:44:fd:7b:59:5e bge3: <HP Ethernet 1Gb 4-port 331FLR Adapter, ASIC rev. 0x5719001> mem 0xf6b60000-0xf6b6ffff,0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 at device 0.3 numa-domain 0 on pci3 bge3: APE FW version: NCSI v1.4.12.0 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus3: <MII bus> numa-domain 0 on bge3 brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Using defaults for TSO: 65518/35/2048 bge3: Ethernet address: 2c:44:fd:7b:59:5f pcib4: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem 0xf7d00000-0xf7dfffff,0xf7cf0000-0xf7cf03ff irq 34 at device 0.0 numa-domai= n 0 on pci5 ciss0: PERFORMANT Transport pcib6: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 mps1: <Avago Technologies (LSI) SAS2008> port 0x7000-0x70ff mem 0xf7ff0000-0xf7ff3fff,0xf7f80000-0xf7fbffff irq 40 at device 0.0 numa-domai= n 0 on pci7 mps1: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> pcib8: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci0 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci0 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci0 pci10: <ACPI PCI bus> numa-domain 0 on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 17.0 numa-domain 0 on pci0 pci11: <ACPI PCI bus> numa-domain 0 on pcib11 ehci0: <Intel Patsburg USB 2.0 controller> mem 0xf6c60000-0xf6c603ff irq 21= at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib12: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0 pci12: <ACPI PCI bus> numa-domain 0 on pcib12 pcib13: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci0 pci13: <ACPI PCI bus> numa-domain 0 on pcib13 vgapci0: <VGA-compatible display> mem 0xf5000000-0xf5ffffff,0xf7be0000-0xf7be3fff,0xf7000000-0xf77fffff irq 16 at device 0.1 numa-domain 0 on pci13 vgapci0: Boot video device uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 numa-domain 0 on pci13 usbus1 numa-domain 0 on uhci0 usbus1: 12Mbps Full Speed USB v1.0 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xf6c50000-0xf6c503ff irq 20= at device 29.0 numa-domain 0 on pci0 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci1 usbus2: 480Mbps High Speed USB v2.0 pcib14: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci14: <PCI bus> numa-domain 0 on pcib14 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 atapci0: <Intel Patsburg SATA600 controller> port 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x403= 0-0x403f irq 17 at device 31.2 numa-domain 0 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci15: <ACPI PCI bus> numa-domain 1 on pcib15 pcib16: <PCI-PCI bridge> at device 0.0 numa-domain 1 on pci15 pci16: <PCI bus> numa-domain 1 on pcib16 pcib17: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci15 pci17: <ACPI PCI bus> numa-domain 1 on pcib17 pcib18: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 1 on pci15 pci18: <ACPI PCI bus> numa-domain 1 on pcib18 pcib19: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 1 on pci15 pci19: <ACPI PCI bus> numa-domain 1 on pcib19 pcib20: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 1 on pci15 pci20: <ACPI PCI bus> numa-domain 1 on pcib20 pcib21: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 1 on pci15 pci21: <ACPI PCI bus> numa-domain 1 on pcib21 pcib22: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 1 on pci15 pci22: <ACPI PCI bus> numa-domain 1 on pcib22 pcib23: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci15 pci23: <ACPI PCI bus> numa-domain 1 on pcib23 pcib24: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 1 on pci15 pci24: <ACPI PCI bus> numa-domain 1 on pcib24 pcib25: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 1 on pci15 pci25: <ACPI PCI bus> numa-domain 1 on pcib25 pcib26: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 1 on pci15 pci26: <ACPI PCI bus> numa-domain 1 on pcib26 acpi_tz0: <Thermal Zone> on acpi0 ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 f= lags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on i= sa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est3 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est4 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est5 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est6 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est7 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est8 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est9 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est10 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 238c00001c00 device_attach: est11 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen2.1: <Intel EHCI root HUB> at usbus2 ugen1.1: <HP UHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ipmi0: IPMI device rev. 2, firmware rev. 2.50, version 2.0, device support = mask 0x8f ipmi0: Number of channels 1 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub3 numa-domain 0 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub4 numa-domain 0 on uhub1 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen2.3: <vendor 0x0424 product 0x2660> at usbus2 uhub5 numa-domain 0 on uhub3 uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2 uhub5: 2 ports with 1 removable, self powered ses0 at mps1 bus 0 scbus3 target 43 lun 0 ses0: <HP MSA60 2.18> Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number SGA817005M ses0: 300.000MB/s transfers ses0: SES Device da1 at mps1 bus 0 scbus3 target 31 lun 0 da1: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da1: Serial Number WD-WMC1P0054868 da1: 150.000MB/s transfers da1: Command Queueing enabled da1: 1907729MB (3907029168 512 byte sectors) da5 at mps1 bus 0 scbus3 target 35 lun 0 da5: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da5: Serial Number WD-WMC1P0212052 da5: 150.000MB/s transfers da5: Command Queueing enabled da5: 1907729MB (3907029168 512 byte sectors) da4 at mps1 bus 0 scbus3 target 34 lun 0 da4: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da4: Serial Number WD-WMC1P0087107 da4: 150.000MB/s transfers da4: Command Queueing enabled da4: 1907729MB (3907029168 512 byte sectors) da6 at mps1 bus 0 scbus3 target 36 lun 0 da6: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da6: Serial Number WD-WMC1P0213822 da6: 150.000MB/s transfers da6: Command Queueing enabled da6: 1907729MB (3907029168 512 byte sectors) da8 at mps1 bus 0 scbus3 target 38 lun 0 da8: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da8: Serial Number WD-WMC1P0053015 da8: 150.000MB/s transfers da8: Command Queueing enabled da8: 1907729MB (3907029168 512 byte sectors) da9 at mps1 bus 0 scbus3 target 39 lun 0 da9: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da9: Serial Number WD-WMC1P0053035 da9: 150.000MB/s transfers da9: Command Queueing enabled da9: 1907729MB (3907029168 512 byte sectors) da10 at mps1 bus 0 scbus3 target 40 lun 0 da10: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da10: Serial Number WD-WMC1P0116027 da10: 150.000MB/s transfers da10: Command Queueing enabled da10: 1907729MB (3907029168 512 byte sectors) da3 at mps1 bus 0 scbus3 target 33 lun 0 da3: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da3: Serial Number WD-WMC1P0087547 da3: 150.000MB/s transfers da3: Command Queueing enabled da3: 1907729MB (3907029168 512 byte sectors) da11 at mps1 bus 0 scbus3 target 41 lun 0 da11: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da11: Serial Number WD-WMC1P0115889 da11: 150.000MB/s transfers da11: Command Queueing enabled da11: 1907729MB (3907029168 512 byte sectors) cd0 at ata2 bus 0 scbus4 target 0 lun 0 cd0: <hp DVD ROM UJ8C2 DC02> Removable CD-ROM SCSI device cd0: Serial Number HP34 021570 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - t= ray closed da12 at mps1 bus 0 scbus3 target 42 lun 0 da12: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da12: Serial Number WD-WMC1P0115969 da12: 150.000MB/s transfers da12: Command Queueing enabled da12: 1907729MB (3907029168 512 byte sectors) da2 at mps1 bus 0 scbus3 target 32 lun 0 da2: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da2: Serial Number WD-WMC1P0212306 da2: 150.000MB/s transfers da2: Command Queueing enabled da2: 1907729MB (3907029168 512 byte sectors) da7 at mps1 bus 0 scbus3 target 37 lun 0 da7: <ATA WDC WD2000FYYZ-0 1K02> Fixed Direct Access SPC-4 SCSI device da7: Serial Number WD-WMC1P0215894 da7: 150.000MB/s transfers da7: Command Queueing enabled da7: 1907729MB (3907029168 512 byte sectors) da0 at ciss0 bus 0 scbus1 target 0 lun 0 da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device da0: Serial Number 001438027E7FB80 da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 858210MB (1757614684 512 byte sectors) ses0: da1,pass1 in Array Device Slot 2, SAS Slot: 2+ phys at slot 1 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571281 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da2,pass2 in Array Device Slot 3, SAS Slot: 2+ phys at slot 2 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571282 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da3,pass3 in Array Device Slot 4, SAS Slot: 2+ phys at slot 3 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571283 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da4,pass4 in Array Device Slot 5, SAS Slot: 2+ phys at slot 4 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571284 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da5,pass5 in Array Device Slot 6, SAS Slot: 2+ phys at slot 5 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571285 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da6,pass6 in Array Device Slot 7, SAS Slot: 2+ phys at slot 6 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571286 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da7,pass7 in Array Device Slot 8, SAS Slot: 2+ phys at slot 7 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571287 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da8,pass8 in Array Device Slot 9, SAS Slot: 2+ phys at slot 8 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571288 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da9,pass9 in Array Device Slot 10, SAS Slot: 2+ phys at slot 9 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 5001438001571289 ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da10,pass10 in Array Device Slot 11, SAS Slot: 2+ phys at slot 10 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 500143800157128a ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 ses0: da11,pass11 in Array Device Slot 12, SAS Slot: 2+ phys at slot 11 ses0: phy 0: SATA device ses0: phy 0: parent 5001438001571280 addr 500143800157128b ses0: phy 1: SAS device type 0 phy 0 ses0: phy 1: parent 0 addr 0 Trying to mount root from zfs:zroot/ROOT/default []... lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP ioat0: <SNB IOAT Ch0> mem 0xf6cf0000-0xf6cf3fff irq 31 at device 4.0 numa-domain 0 on pci0 ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Br= eak> ioat1: <SNB IOAT Ch1> mem 0xf6ce0000-0xf6ce3fff irq 39 at device 4.1 numa-domain 0 on pci0 ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Br= eak> ioat2: <SNB IOAT Ch2> mem 0xf6cd0000-0xf6cd3fff irq 31 at device 4.2 numa-domain 0 on pci0 ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat3: <SNB IOAT Ch3> mem 0xf6cc0000-0xf6cc3fff irq 39 at device 4.3 numa-domain 0 on pci0 ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat4: <SNB IOAT Ch4> mem 0xf6cb0000-0xf6cb3fff irq 31 at device 4.4 numa-domain 0 on pci0 ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat5: <SNB IOAT Ch5> mem 0xf6ca0000-0xf6ca3fff irq 39 at device 4.5 numa-domain 0 on pci0 ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat6: <SNB IOAT Ch6> mem 0xf6c90000-0xf6c93fff irq 31 at device 4.6 numa-domain 0 on pci0 ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat7: <SNB IOAT Ch7> mem 0xf6c80000-0xf6c83fff irq 39 at device 4.7 numa-domain 0 on pci0 ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat8: <SNB IOAT Ch0> mem 0xfbff0000-0xfbff3fff irq 55 at device 4.0 numa-domain 1 on pci15 ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Br= eak> ioat9: <SNB IOAT Ch1> mem 0xfbfe0000-0xfbfe3fff irq 63 at device 4.1 numa-domain 1 on pci15 ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Br= eak> ioat10: <SNB IOAT Ch2> mem 0xfbfd0000-0xfbfd3fff irq 55 at device 4.2 numa-domain 1 on pci15 ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat11: <SNB IOAT Ch3> mem 0xfbfc0000-0xfbfc3fff irq 63 at device 4.3 numa-domain 1 on pci15 ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat12: <SNB IOAT Ch4> mem 0xfbfb0000-0xfbfb3fff irq 55 at device 4.4 numa-domain 1 on pci15 ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat13: <SNB IOAT Ch5> mem 0xfbfa0000-0xfbfa3fff irq 63 at device 4.5 numa-domain 1 on pci15 ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat14: <SNB IOAT Ch6> mem 0xfbf90000-0xfbf93fff irq 55 at device 4.6 numa-domain 1 on pci15 ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat15: <SNB IOAT Ch7> mem 0xfbf80000-0xfbf83fff irq 63 at device 4.7 numa-domain 1 on pci15 ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-248630-227>