Date: Sat, 12 Dec 2015 23:58:29 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 198062] FreeBSD 10.1-RELEASE kernel freezes on 'pci0: <ACPI PCI bus> on pcib0' Message-ID: <bug-198062-8-jWK8hYUW6d@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-198062-8@https.bugs.freebsd.org/bugzilla/> References: <bug-198062-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=198062 --- Comment #8 from Joseph King <jhkingsr@gmail.com> --- As request by John Baldwin... comconsole captures of 9.3-64bit and 10.2-64bit. ---------- is the break between the captures. FreeBSD 9.3-64bit boot captured from com1 OK boot /boot/kernel/kernel text=0xf0bdb0 data=0x13d720+0x123388 syms=[0x8+0x149f88+0x8+0x15abf1] Booting... Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE #0 r268512: Thu Jul 10 23:44:39 UTC 2014 root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Dual-Core AMD Opteron(tm) Processor 2220 (2793.06-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f13 Family = 0xf Model = 0x41 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> real memory = 4294967296 (4096 MB) avail memory = 4082606080 (3893 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <062309 APIC1333> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard kbd1 at kbdmux0 acpi0: <062309 XSDT1333> on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0 hpet0: HPET never increments, disabling device_attach: hpet0 attach returned 6 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pci2: <ACPI PCI bus> on pcib2 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xff4fe000-0xff4fffff irq 11 at device 14.0 on pci1 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ata4: <ATA channel> at channel 2 on atapci0 ata5: <ATA channel> at channel 3 on atapci0 atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 ata0: <ATA channel> at channel 0 on atapci1 ata1: <ATA channel> at channel 1 on atapci1 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xd400-0xd4ff mem 0xff6ec000-0xff6ecfff irq 10 at device 3.0 on pci0 usbus0 on ohci0 ohci1: <OHCI (generic) USB controller> port 0xd800-0xd8ff mem 0xff6ed000-0xff6edfff irq 10 at device 3.1 on pci0 usbus1 on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem 0xff6ee000-0xff6eefff irq 10 at device 3.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 fxp0: <Intel 82551 Pro/100 Ethernet> port 0xec00-0xec3f mem 0xff6eb000-0xff6ebfff,0xff6a0000-0xff6bffff irq 16 at device 4.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow fxp0: Ethernet address: 00:e0:81:4d:5e:c8 pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008100> mem 0xff5d0000-0xff5dffff,0xff5c0000-0xff5cffff irq 26 at device 4.0 on pci4 bge0: CHIP ID 0x00008100; ASIC REV 0x08; CHIP REV 0x81; PCI-X 133 MHz miibus1: <MII bus> on bge0 brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:e0:81:4d:21:ec bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008100> mem 0xff5f0000-0xff5fffff,0xff5e0000-0xff5effff irq 27 at device 4.1 on pci4 bge1: CHIP ID 0x00008100; ASIC REV 0x08; CHIP REV 0x81; PCI-X 133 MHz miibus2: <MII bus> on bge1 brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:e0:81:4d:21:ed pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd8000000-0xdfffffff,0xff6f0000-0xff6fffff irq 17 at device 12.0 on pci0 vgapci0: Boot video device acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range powernow0: <PowerNow! K8> on cpu0 powernow1: <PowerNow! K8> on cpu1 powernow2: <PowerNow! K8> on cpu2 powernow3: <PowerNow! K8> on cpu3 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <0x1166> at usbus0 uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <0x1166> at usbus1 uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <0x1166> at usbus2 uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 cd0 at ata0 bus 0 scbus4 target 1 lun 0 cd0: <TEAC DV-28E-V 1.AB> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [327713 x 2048 byte records] ada0: <ST3500630NS 3.AEK> ATA-7 SATA 1.x device ada0: Serial Number 5QG2LGTV ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <ST3500630NS 3.AEK> ATA-7 SATA 1.x device ada1: Serial Number 5QG2HTBW ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ada2 at ata4 bus 0 scbus2 target 0 lun 0 ada2: <ST3500630NS 3.AEK> ATA-7 SATA 1.x device ada2: Serial Number 5QG2LHZF ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad8 ada3 at ata5 bus 0 scbus3 target 0 lun 0 ada3: <ST3500630NS 3.AEK> ATA-7 SATA 1.x device ada3: Serial Number 5QG2JRV9 ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad10 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! uhub2: 4 ports with 4 removable, self powered ugen1.2: <Logitech> at usbus1 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus1 kbd2 at ukbd0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus1 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 2> on usbus1 Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]... Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: Mounting local file systems:. /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Starting Network: lo0 fxp0 bge0 bge1. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> fxp0fxp0: link state changed to DOWN : flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> ether 00:e0:81:4d:5e:c8 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (none) status: no carrier bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:e0:81:4d:21:ec nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:e0:81:4d:21:ed nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting devd. Starting Network: fxp0. fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO> ether 00:e0:81:4d:5e:c8 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (none) status: no carrier Starting Network: bge0. bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:e0:81:4d:21:ec nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting Network: bge1. bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:e0:81:4d:21:ed nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting ums0 moused. add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Generating host.conf. eval: cannot create /etc/host.conf: Read-only file system eval: cannot create /etc/host.conf: Read-only file system eval: cannot create /etc/host.conf: Read-only file system Creating and/or trimming log files. Starting syslogd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat 32-bit compatibility ldconfig path: /usr/lib32 Clearing /tmp (X related). Starting local daemons: Welcome to FreeBSD! Please choose the appropriate terminal type for your system. Common console types are: ansi Standard ANSI terminal vt100 VT100 or compatible terminal xterm xterm terminal emulator (or compatible) cons25w cons25w terminal Console type [vt100]: ---------- FreeBSD 10.2 64bit boot captured from com1 OK boot /boot/kernel/kernel text=0xfc8de8 data=0x1283b0+0x207880 syms=[0x8+0x145350+0x8+0x15fe20] Booting... Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Dual-Core AMD Opteron(tm) Processor 2220 (2793.06-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x40f13 Family=0xf Model=0x41 Stepping=3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> SVM: NAsids=64 real memory = 4294967296 (4096 MB) avail memory = 4103499776 (3913 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <062309 APIC1333> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 random device not loaded; using insecure entropy ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 96/64 (20150515/tbfadt-644) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard random: <Software, Yarrow> initialized kbd1 at kbdmux0 acpi0: <062309 XSDT1333> on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0 hpet0: HPET never increments, disabling device_attach: hpet0 attach returned 6 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 ----- DONE... System is frozen at this point ----- -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-198062-8-jWK8hYUW6d>