Date: Tue, 17 Feb 2015 18:32:22 +0100 From: Luca Pizzamiglio <luca.pizzamiglio@gmail.com> To: Ben Perrault <ben.perrault@gmail.com> Cc: FreeBSD Hackers <freebsd-hackers@freebsd.org>, "freebsd-network@freebsd.org" <freebsd-network@freebsd.org>, FreeBSD Current <freebsd-current@freebsd.org>, "freebsd-hardware@freebsd.org" <freebsd-hardware@freebsd.org> Subject: Re: pcie Realtek 8168G issues (re driver) Message-ID: <CAB88xy-10=FPPSf7g7A7e8CMVstmLV9pd6_-%2BQvBJe8bN6mwRQ@mail.gmail.com> In-Reply-To: <4E4BF84E-F6FD-4D25-8B2C-2B443894697B@gmail.com> References: <CAB88xy9oCbq8s99bkWOAGptkH4vr2omsQqyLHrMNHAhtZDH-5g@mail.gmail.com> <4E4BF84E-F6FD-4D25-8B2C-2B443894697B@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Ben, thanks for the tip! tso was already disabled. I tried anyway and unfortunately it crashes as before. I filled a bug report (https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D197535) and marius@ is giving me a big help on it. Best regards, Luca On Fri, Feb 13, 2015 at 7:34 PM, Ben Perrault <ben.perrault@gmail.com> wrot= e: > Luca, > > I've had the same issue with this interface on both PCIe boards and embed= ded in a handful of Lenovo products. The one, fairly ugly workaround I've f= ound that makes it work well enough is disable tso ( i.e. ifconfig re0 down= && ifconfig re0 -tso && ifconfig re0 up ). This also seems to stop the pan= ics under current. > > I'm not sure it will work for you - but it has on everyone of those inter= faces I've dealt with. > > Good luck, > -bp > >> On Feb 13, 2015, at 8:06 AM, Luca Pizzamiglio <luca.pizzamiglio@gmail.co= m> wrote: >> >> Hi, I'm Luca, >> >> I've some issues using a PCIe Realtek Ethernet board: >> re0@pci0:3:0:0: class=3D0x020000 card=3D0x012310ec chip=3D0x816810ec rev= =3D0x0c hdr=3D0x00 >> vendor =3D 'Realtek Semiconductor Co., Ltd.' >> device =3D 'RTL8111/8168B PCI Express Gigabit Ethernet controller= ' >> class =3D network >> subclass =3D ethernet >> bar [10] =3D type I/O Port, range 32, base 0x1000, size 256, enable= d >> bar [18] =3D type Memory, range 64, base 0x90500000, size 4096, ena= bled >> bar [20] =3D type Prefetchable Memory, range 64, base 0x90400000, >> size 16384, enabled >> cap 01[40] =3D powerspec 3 supports D0 D1 D2 D3 current D0 >> cap 05[50] =3D MSI supports 1 message, 64 bit >> cap 10[70] =3D PCI-Express 2 endpoint IRQ 1 max data 128(128) link x1= (x1) >> speed 2.5(2.5) ASPM disabled(L0s/L1) >> cap 11[b0] =3D MSI-X supports 4 messages >> Table in map 0x20[0x0], PBA in map 0x20[0x800] >> cap 03[d0] =3D VPD >> ecap 0001[100] =3D AER 1 0 fatal 0 non-fatal 0 corrected >> ecap 0002[140] =3D VC 1 max VC0 >> ecap 0003[160] =3D Serial 1 01000000684ce000 >> ecap 0018[170] =3D LTR 1 >> >> Rx and Tx don't work. After some minutes the interface is activated I >> get kernel panic. >> I've already tried to disable MSIx and MSI. >> It seems a DMA problem, rx fill the 256 descriptors and the nothing >> else until the panic. netstat -s shows now new packets. >> >> I filled a bug report with more infos: >> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D197535 >> >> could someone kindly pointing some ideas? >> >> Best regards, >> Luca >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB88xy-10=FPPSf7g7A7e8CMVstmLV9pd6_-%2BQvBJe8bN6mwRQ>