Date: Tue, 03 Jun 2008 13:19:32 -0400 From: Joe Marcus Clarke <marcus@freebsd.org> To: current <current@freebsd.org> Cc: sos@freebsd.org Subject: Re: Hang while booting today's -CURRENT (ATA related?) Message-ID: <48457D24.9020908@freebsd.org> In-Reply-To: <1212262040.30661.25.camel@shumai.marcuscom.com> References: <1212262040.30661.25.camel@shumai.marcuscom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Joe Marcus Clarke wrote: > I have a Dell Precision 360 workstation (i386) with an ATA DVD-RW drive > and an SATA Seagate drive. After a long time (Feb 14, 2008), I supped > -CURRENT, and rebooted. Now the box hangs in what appears to be a probe > of the ATA devices. Here are the last few lines of the verbose boot > (copied from screen): > > ata0: identify ch->devices=00000000 > ata1: identify ch->devices=00010000 > The GEOM class LABEL is already loaded. > ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire > acd0: setting PIO4 on ICH5 chip > acd0: setting UDMA33 on ICH5 chip > acd0: <HL-DT-ST DVD+RW GRA-4120B/F114> CDRW driver at ata1 as master > acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, > UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet > acd0: Writes: CD, CDRW, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata2: identify ch->devices=00000000 > ata3: identify ch->devices=00000001 > > That's it. After the DVD drive, the only other ATA device is the > SATA-attached Seagate disk which is master on ata3. The previous > kernel's verbose boot reported: > > ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire > ad6: 152627MB <Seagate ST3160815AS 3.AAD> at ata3-master SATA150 > ad6: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth > queue > > This drive is located on a Promise controller: > > atapci0: <Promise PDC20375 SATA150 controller> port 0xcc00-0xcc3f,0xcbf0-0xcbff,0xcc80-0xccff mem 0xfe73f000-0xfe73ffff,0xfe740000-0xfe75ffff irq 22 at device 1.0 on pci2 > ... > ata3: <ATA channel 1> on atapci0 > > Any ideas? Thanks. I did some historical testing, and found that sys/dev/ata + sys/sys/ata.h from April 9, 2008 is the last revision that works on this machine. That's the code just before the port multiplier changes went in. I know that still leaves a lot of ground to cover, but at least it rules out changes from 2/14 to 4/9. Joe -- Joe Marcus Clarke FreeBSD GNOME Team :: gnome@FreeBSD.org FreeNode / #freebsd-gnome http://www.FreeBSD.org/gnome
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48457D24.9020908>