Date: Wed, 21 May 2014 21:43:49 +0200 From: Jan Henrik Sylvester <me@janh.de> To: Hans Petter Selasky <hps@selasky.org>, John Baldwin <jhb@FreeBSD.org>, Kevin Oberman <rkoberman@gmail.com>, Adrian Chadd <adrian@freebsd.org> Cc: "current@freebsd.org" <current@freebsd.org>, Stefan Ehmann <shoesoft@gmx.net>, "freebsd-mobile@freebsd.org" <freebsd-mobile@freebsd.org> Subject: Re: Thinkpad T410: resume broken Message-ID: <537D01F5.2050101@janh.de> In-Reply-To: <537CFCE4.2000300@selasky.org> References: <53762216.8020205@gmx.net> <CAJ-VmokswTyyfrwbcwzX6c07ui_aTzbJ=jTm_rGw0r824ChaTw@mail.gmail.com> <CAN6yY1t2Zcvy=yMXOqJozRQ-LDp%2BD74gWymrfcCRExuGvfcj=Q@mail.gmail.com> <537753F3.6000202@FreeBSD.org> <537CFB7C.60702@janh.de> <537CFCE4.2000300@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 05/21/2014 21:22, Hans Petter Selasky wrote: > On 05/21/14 21:16, Jan Henrik Sylvester wrote: >> Unfortunately, my USB mouse does not work anymore: After the first >> resume, it took a few seconds until it worked again (the build in >> touchpad was back immediately). After the second resume, it would not >> work anymore at all, even after reconnecting it to a different EHCI >> port. It does work at a XHCI, though, until the next resume. Anyhow, >> this is obviously not related to the original problem. > > Hi, > > USB controller are being reset at resume, so I think this indicates a > more fundamental PCI/BUS problem. Looking through dmesg, it seems that other USB devices (build-in) are reappearing (Qualcomm Gobi 2000, Broadcom Bluetooth Device) after resume, just not the mouse. Are these lines likely related? pci0: failed to set ACPI power state D2 on \134_SB_.PCI0.PEG_: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \134_SB_.PCI0.EXP1: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \134_SB_.PCI0.EXP2: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \134_SB_.PCI0.EXP4: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \134_SB_.PCI0.EXP5: AE_BAD_PARAMETER Thanks, Jan Henrik
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?537D01F5.2050101>