Date: Sat, 13 Nov 2010 14:49:06 +0000 From: "rene@reckschwardt.de" <rene@reckschwardt.de> To: freebsd-net@freebsd.org Subject: Re: ML370 G4 with poor Network Performance and high CPU Load Message-ID: <20101113144911.8554CB470D68@rds11224.i4e-server.de> In-Reply-To: <20101113021507.GG22460@michelle.cdnetworks.com> References: <20101111193534.A7D838090AAD@rds11224.i4e-server.de> <20101111213156.GG17566@michelle.cdnetworks.com> <20101111225340.C2835B470D68@rds11224.i4e-server.de> <20101113021507.GG22460@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a cryptographically signed message in MIME format.
--------------ms060301020609010704040501
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable
> You still didn't post dmesg output. Because there were a lot of
> bge(4) changes since 8.1-RELEASE, I think it would be better to try
> CURRENT or latest snapshot release and check whether you still see
> the same issue.
>
OK, here is the complete dmesg:
file# dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved=
=2E
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #3 r210190: Sat Jul 17 16:30:44 PDT 2010
=20
root@build8x64.pcbsd.org:/usr/obj/storage/fbsd-sources/8.1/sys/GENERIC am=
d64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf41 Family =3D f Model =3D 4 St=
epping =3D 1
=20
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=20
Features2=3D0x659d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR>
AMD Features=3D0x20000800<SYSCALL,LM>
TSC: P-state invariant
real memory =3D 4294967296 (4096 MB)
avail memory =3D 4039778304 (3852 MB)
ACPI APIC Table: <HP 00000083>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP/HT): APIC ID: 7
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16=20
(20100331/tbfadt-707)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <HP P50> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 1.0 on pci3
pci4: <PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem=20
0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 0.0 on pci4
pci4: <base peripheral> at device 1.0 (no driver attached)
pci4: <memory> at device 2.0 (no driver attached)
pci4: <memory> at device 4.0 (no driver attached)
ciss0: <HP Smart Array P600> port 0x4000-0x40ff mem=20
0xfbef0000-0xfbef1fff,0xfbe80000-0xfbebffff irq 29 at device 2.0 on pci3
ciss0: PERFORMANT Transport
ciss0: got 0 MSI messages]
ciss0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci7: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port=20
0x6000-0x603f mem 0xfdfe0000-0xfdffffff,0xfdf80000-0xfdfbffff irq 50 at=20
device 1.0 on pci7
em0: [FILTER]
em0: Ethernet address: 00:11:0a:58:8b:d0
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port=20
0x6040-0x607f mem 0xfdf60000-0xfdf7ffff irq 57 at device 1.1 on pci7
em1: [FILTER]
em1: Ethernet address: 00:11:0a:58:8b:d1
ciss1: <HP Smart Array 641> port 0x6400-0x64ff mem=20
0xfdf50000-0xfdf51fff,0xfdf00000-0xfdf3ffff irq 53 at device 2.0 on pci7
ciss1: PERFORMANT Transport
ciss1: got 0 MSI messages]
ciss1: [ITHREAD]
bge0: <HP NC7781 Gigabit Server Adapter, ASIC rev. 0x001100> mem=20
0xfdef0000-0xfdefffff irq 49 at device 3.0 on pci7
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,=20
1000baseT-FDX, auto
bge0: Ethernet address: 00:13:21:c8:fa:ff
bge0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci11: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci14: <ACPI PCI bus> on pcib6
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x3000-0x301f=20
irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x3020-0x303f=20
irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x3040-0x305f=20
irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x3060-0x307f=20
irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem=20
0xf9ef0000-0xf9ef03ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port=20
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acp=
i0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem=20
0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xcd800-0xd17ff,0xee000-0=
xeffff=20
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 122a0000122a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 122a0000122a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 122a0000122a
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 122a0000122a
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
acd0: DVDROM <HL-DT-STDVD-ROM GDR8164B/0F08> at ata0-master UDMA33
uhub4: 8 ports with 8 removable, self powered
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID ADGVOLUME OK> Fixed Direct Access SCSI-5 device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 2861512MB (5860378032 512 byte sectors: 255H 32S/T 65535C)
da1 at ciss1 bus 0 scbus2 target 0 lun 0
da1: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/label/rootfs0
ZFS filesystem version 3
ZFS storage pool version 14
em0: link state changed to UP
pid 1120 (mpd), uid 1003: exited on signal 6
em0: link state changed to DOWN
em0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
pid 28337 (try), uid 0: exited on signal 10 (core dumped)
pid 67888 (try), uid 0: exited on signal 10 (core dumped)
pid 9379 (mpd), uid 0: exited on signal 6 (core dumped)
lagg0: link state changed to UP
lagg0: link state changed to DOWN
lagg0: link state changed to UP
lagg0: link state changed to DOWN
lagg0: link state changed to UP
em1: link state changed to UP
lagg0: link state changed to DOWN
bge0: link state changed to UP
lagg0: link state changed to UP
lagg0: link state changed to DOWN
regards r=E9
--------------ms060301020609010704040501--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20101113144911.8554CB470D68>