Date: Thu, 19 Jan 2006 15:52:58 +0800 From: Ganbold <ganbold@micom.mng.net> To: pyunyh@gmail.com Cc: freebsd-stable@FreeBSD.org Subject: Re: fxp0: device timeout and sk0: watchdog timeout problems Message-ID: <7.0.0.16.2.20060119153913.0432e7e8@micom.mng.net> In-Reply-To: <20060119071613.GB44245@rndsoft.co.kr> References: <7.0.0.16.2.20060118090616.04209af8@micom.mng.net> <20060118015515.GB39792@rndsoft.co.kr> <7.0.0.16.2.20060118102336.03fbcef8@micom.mng.net> <20060118023646.GA40276@rndsoft.co.kr> <7.0.0.16.2.20060119141302.04354d70@micom.mng.net> <20060119071613.GB44245@rndsoft.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
At 03:16 PM 1/19/2006, you wrote:
>On Thu, Jan 19, 2006 at 02:14:13PM +0800, Ganbold wrote:
> > I have same problem even after updating the sk code to the latest:
> >
> > Jan 19 12:58:53 gw kernel: fxp0: device timeout
> > Jan 19 12:59:10 gw kernel: sk0: watchdog timeout
> > Jan 19 12:59:10 gw kernel: sk0: link state changed to DOWN
> >
>
>Does interface down and up help your situation?
This server is located 370km from where I'm now. People there just
reboot the server.
>It would be great to know what mwchan is used if your application
>was blocked.
mwchan?
>Would you try another onboard NIC with fxp to narrow down the issue?
Hard to say since it is on remote site. I could ask person there.
>Since it's hard to reproduce the problem on my system I need more
>information. Would you show me more information for your network
>configuration and how to reproduce it?
This machine is doing NAT, ipfw and it has squid from ports. It seems
like 3GB-9GB web traffic is going through per day.
gw# ifconfig -a
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU>
inet 175.176.1.11 netmask 0xffff0000 broadcast 175.176.255.255
ether 00:11:95:e1:7d:16
media: Ethernet autoselect (1000baseTX <full-duplex,flag0,flag1>)
status: active
pcn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:06:29:50:e2:3c
media: Ethernet autoselect (none)
status: no carrier
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet x.x.x.x netmask 0xfffffff0 broadcast x.x.x.x
ether 00:03:47:e0:64:3c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Other onboard NIC is pcn:
pcn0@pci0:9:0: class=0x020000 card=0x20001014 chip=0x20001022
rev=0x36 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Am79C970/1/2/3/5/6 PCnet LANCE PCI Ethernet Controller'
class = network
subclass = ethernet
I heard this card also might have some problems, but I'm not sure.
Correct me if I'm wrong.
Ganbold
>--
>Regards,
>Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7.0.0.16.2.20060119153913.0432e7e8>