Date: Sun, 24 Jun 2012 05:59:32 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r237519 - head/sys/dev/ath/ath_hal/ar5416 Message-ID: <201206240559.q5O5xWTo090688@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Sun Jun 24 05:59:32 2012 New Revision: 237519 URL: http://svn.freebsd.org/changeset/base/237519 Log: Sometimes the AR5416 sends back radar PHY errors with both the PHY error and the CRC error bits set. The radar payload is correct. When this happens, the stack doesn't see them PHY error frames and isn't interpreted as a PHY error. So, no radar detection and no radiotap PHY error handling. Now, this may introduce some weird issues if the MAC sends up some other combination of CRC error + PHY error frames; this commit would break that and mark them as PHY errors instead of CRC errors. I may tinker with this a little more to pass radar/early radar/spectral frames up as PHY errors if the CRC bit is set, to restore the previous behaviour (where if CRC is set on a PHY error frame, it's marked as a CRC error rather than PHY error.) Tested on: AR5416, over the air, to a USRP N200 which is generating a large number of a variety of radar pulses. TODO: Test on AR9130, AR9160, AR9280 (and maybe radar pulses on 2GHz on AR9285/AR9287.) PR: kern/169362 Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416_recv.c Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416_recv.c ============================================================================== --- head/sys/dev/ath/ath_hal/ar5416/ar5416_recv.c Sun Jun 24 04:29:03 2012 (r237518) +++ head/sys/dev/ath/ath_hal/ar5416/ar5416_recv.c Sun Jun 24 05:59:32 2012 (r237519) @@ -228,15 +228,23 @@ ar5416ProcRxDesc(struct ath_hal *ah, str * Consequently we filter them out here so we don't * confuse and/or complicate drivers. */ - if (ads->ds_rxstatus8 & AR_CRCErr) - rs->rs_status |= HAL_RXERR_CRC; - else if (ads->ds_rxstatus8 & AR_PHYErr) { + + /* + * The AR5416 sometimes sets both AR_CRCErr and AR_PHYErr + * when reporting radar pulses. In this instance, + * clear HAL_RXERR_CRC and set HAL_RXERR_PHY. + * + * See PR kern/169362. + */ + if (ads->ds_rxstatus8 & AR_PHYErr) { u_int phyerr; rs->rs_status |= HAL_RXERR_PHY; phyerr = MS(ads->ds_rxstatus8, AR_PHYErrCode); rs->rs_phyerr = phyerr; - } else if (ads->ds_rxstatus8 & AR_DecryptCRCErr) + } else if (ads->ds_rxstatus8 & AR_CRCErr) + rs->rs_status |= HAL_RXERR_CRC; + else if (ads->ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= HAL_RXERR_DECRYPT; else if (ads->ds_rxstatus8 & AR_MichaelErr) rs->rs_status |= HAL_RXERR_MIC;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201206240559.q5O5xWTo090688>