Date: Tue, 16 Jan 2007 13:17:37 +0100 From: Olivier Houchard <mlfbsd@ci0.org> To: Roman Le Houelleur <roman@IPricot.com> Cc: freebsd-arm@freebsd.org Subject: Re: Intel IXDP425 eval board Message-ID: <20070116121737.GA9004@ci0.org> In-Reply-To: <45ACA11B.8060301@IPricot.com>
index | next in thread | previous in thread | raw e-mail
On Tue, Jan 16, 2007 at 10:55:39AM +0100, Roman Le Houelleur wrote: > Hi, > > First of all, congratulation for the work being done porting > FreeBSD to the IXP425 ! > > I have an IXDP425 eval board rev A3 from Intel on which I > tried the AVILA procedure as is, just in case, strictly > following information from: > http://people.freebsd.org/~sam/README-gateworks > > Unfortunatly it will not "go", but just freeze: > RedBoot> reset > ... Resetting. > +in bist > out bist > begin @ 0x00008f60 ; end @ 0x00008f70 > (0) init_entry = 0x00008f60 ; fun @ 0x50005ef8 > (1) init_entry = 0x00008f64 ; fun @ 0x50017ef0 > (2) init_entry = 0x00008f68 ; fun @ 0x500071d4 > (3) init_entry = 0x00008f6c ; fun @ 0x5001f534 > nfe : regval[0] = 0x0013 > Ethernet eth0: MAC address 00:00:83:28:50:22 > IP: 172.16.0.44, Default server: 172.16.0.50 > > RedBoot(tm) bootstrap and debug environment [ROM] > release, version 1.92p1 - built 17:24:25, Jul 19 2004 > > Platform: IXP425 ANTA (XScale) > Copyright (C) 2000, 2001, 2002, Red Hat, Inc. > > RAM: 0x00000000-0x08000000, 0x0001c068-0x07fd1000 available > FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. > RedBoot> ip -h 192.168.31.182 -l 192.168.31.90 > IP: 192.168.31.90, Default server: 192.168.31.182 > RedBoot> load -b 0x200000 kernel-avila.nfs > Using default protocol (TFTP) > Address offset = 0x40000000 > Entry point: 0x00200100, address range: 0x00200000-0x006c9aa8 > RedBoot> go > > Does anyone have experience with this board ? Does it > have any chance to work w/ the AVILA kernel config, or > is this one too specific ? > > I am using FreeBSD 7.0-CURRENT #0: Thu Dec 14 16:10:30 UTC 2006 > > Regards, > Roman. Hi Roman, It should definitively go further. I don't know the IXDP425, doesn't it have two UART ports ? If so, could you try using the other one ? It should at least print something, I see nothing AVILA-centric in the early initialization code. Thanks, Olivierhelp
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070116121737.GA9004>