Date: Wed, 14 Aug 2019 20:33:04 +0200 From: =?utf-8?Q?S=C3=B8ren_Schmidt?= <soren.schmidt@gmail.com> To: Mit Matelske <mit@pt.net> Cc: Marcin Wojtas <mw@semihalf.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Espressobin anyone ? Message-ID: <0E42E605-477E-4E65-810E-BD3A8CDE2C80@gmail.com> In-Reply-To: <1547777156.662147.1565798461515.JavaMail.zimbra@perftech.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <1634814667.34671.1565644485029.JavaMail.zimbra@perftech.com> <CAPv3WKeMEe9mW8YYS8k=J9obwde9KEidMHHQpPJ0idrhcyx=RQ@mail.gmail.com> <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> <1021311926.304550.1565731831094.JavaMail.zimbra@perftech.com> <4AE7C7A2-0BFB-4093-AE19-6AAC8F44FF25@gmail.com> <917479365.631712.1565792953255.JavaMail.zimbra@perftech.com> <CAPv3WKeCRWy65LPeeJiisPtaz=LePpVYLDAi2cj%2B2TQR=r09YA@mail.gmail.com> <1547777156.662147.1565798461515.JavaMail.zimbra@perftech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail=_E43990F4-9168-4815-8CD3-9AB5595D11CD
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=utf-8
It might simply be broken in -current (again).
I just updated my stable12 tree and I pulled in new .dts files for just =
about anything=E2=80=A6
Needless to say, it broke the Espressobin=E2=80=99s SD support, it now =
fails just like yours..
It also broke allwinner builds and what not, so I=E2=80=99m just going =
back in time again :)
I wonder why there is this overwhelming need to import stuff that breaks =
things right, left and center in a -stable branch ?
That would have earned you the pointy hat back when=E2=80=A6.
-S=C3=B8ren
> On 14 Aug 2019, at 18.01, Mit Matelske <mit@pt.net> wrote:
>=20
> Marcin-
>=20
> Sorry I didn't reply yesterday. I didn't have any luck with that =
either. I tried a lot of permutations.
>=20
> Not saying for 100% it doesn't work, but I couldn't get it to work!
>=20
> Mit
>=20
> From: "Marcin Wojtas" <mw@semihalf.com>
> To: "Mit Matelske" <mit@pt.net>
> Cc: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com>, "freebsd-arm" =
<freebsd-arm@freebsd.org>
> Sent: Wednesday, August 14, 2019 10:41:04 AM
> Subject: Re: Espressobin anyone ?
>=20
> Hi Mit,
> Since you are using the latest 13-current, could you please try if =
passing rootdev via u-boot bootargs (please see my previous email) works =
for you without the loader modification?
>=20
> Best regards,
> Marcin
>=20
> =C5=9Br., 14 sie 2019 o 16:29 Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> napisa=C5=82(a):
> Soren-
>=20
> Thanks for the info. I'll grab a couple more SD cards at lunch. This =
one is a new Samsung 32GB. I'll also try putting the changes into 12 =
and see if that helps. I'm using the latest 13-current.
>=20
> Again, appreciate the hand holding!
>=20
> Mit
>=20
> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>, =
"freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> Sent: Wednesday, August 14, 2019 2:30:31 AM
> Subject: Re: Espressobin anyone ?
>=20
> Hi Mit
> Hmm, from your earlier posted dmesgs it looks like the SD card is not =
getting detected properly..
>=20
> I get this output:
>=20
> sdhci_xenon0: <Armada Xenon SDHCI controller> mem =
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> mmc0: <MMC/SD bus> on sdhci_xenon0
> =E2=80=A6snip=E2=80=A6
> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 PH> at mmc0 =
50.0MHz/4bit/65535-block
>=20
> The problem you see was fixed for me by r348882, maybe it got broken =
later, I havn=E2=80=99t backported the later changes..
>=20
> Have you tried another SD card ? I have found 2 of mine that the =
espressobin doesn=E2=80=99t like, but works fine with bananapi and =
friends...
>=20
> -S=C3=B8ren
>=20
> On 13 Aug 2019, at 23.30, Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> wrote:
>=20
> Soren-
>=20
> Thanks for the code snippet! That will fix one of the problems.
>=20
> I still can't mount my filesystem, though. I think I'm doing =
something really simple, wrong. I believe I'm running the latest code =
and added some printfs to show the kernel setting the regulator:
>=20
>=20
> usbus1 on ehci0
> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) =3D 19
> sdhci_xenon0: vqmmc-supply regulator found
> sdhci_xenon0: <Armada Xenon SDHCI controller> mem =
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
>=20
>=20
> Could there be a problem with how I am setting up my filesystem? I've =
tried both freebsd-ufs and freebsd as the type, with no luck. A gpart =
listing of my SD card:
>=20
> root@fbl:~ # gpart list da3
> Geom name: da3
> modified: false
> state: OK
> fwheads: 255
> fwsectors: 63
> last: 62521335
> first: 3
> entries: 4
> scheme: GPT
> Providers:
> 1. Name: da3p1
> Mediasize: 41943040 (40M)
> Sectorsize: 512
> Stripesize: 0
> Stripeoffset: 1536
> Mode: r0w0e0
> efimedia: =
HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x14000)
> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
> label: (null)
> length: 41943040
> offset: 1536
> type: efi
> index: 1
> end: 81922
> start: 3
> 2. Name: da3p2
> Mediasize: 31968979456 (30G)
> Sectorsize: 512
> Stripesize: 0
> Stripeoffset: 41944576
> Mode: r0w0e0
> efimedia: =
HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x3b8bff5)
> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
> label: (null)
> length: 31968979456
> offset: 41944576
> type: freebsd-ufs
> index: 2
> end: 62521335
> start: 81923
> Consumers:
> 1. Name: da3
> Mediasize: 32010928128 (30G)
> Sectorsize: 512
> Mode: r0w0e0
>=20
> Thanks!!
>=20
> Mit
>=20
> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
> To: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>
> Cc: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>, "freebsd-arm" =
<freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> Sent: Tuesday, August 13, 2019 12:55:09 PM
> Subject: Re: Espressobin anyone ?
>=20
> Hi
> That doesn=E2=80=99t seen to work on the espressobin, or least I =
can=E2=80=99t get it to pick it up.
>=20
> I use this patch as a workaround:
>=20
> Index: main.c
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> --- main.c (revision 350496)
> +++ main.c (working copy)
> @@ -463,6 +462,13 @@
> int rv;
> char *rootdev;
>=20
> +#if defined(__aarch64__)
> + /* SOS HACK in rootdev, at least Espressobin gets this wrong */
> + printf("Setting currdev hack\n");
> + set_currdev("disk0p2");
> + return (0);
> +#endif
> +
> /*
> * First choice: if rootdev is already set, use that, even if
> * it's wrong.
>=20
> Its not pretty but it does the job until I get time to look into why =
bootargs aren=E2=80=99t passed / won=E2=80=99t stick, probably something =
I havn=E2=80=99t backported to my -stable12 sources yet...
>=20
> -S=C3=B8ren
>=20
> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw@semihalf.com =
<mailto:mw@semihalf.com>> wrote:
>=20
> Hi,
>=20
> Not sure if it's what you are looking for, but in order to autoboot, I
> simply pass 'rootdev=3DdiskXpY' in the bootargs variable. Here's =
example from
> A3720-DB (same should work on EspressoBin):
>=20
> Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatload usb 0:1
> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
> resetting USB...
> USB0: Register 2000104 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> USB1: USB EHCI 1.00
> - ______ ____ _____ _____
> | ____| | _ \ / ____| __ \
> | |___ _ __ ___ ___ | |_) | (___ | | | |
> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> | | | | | __/ __/| |_) |____) | |__| |
> | | | | | | || | | |
> |_| |_| \___|\___||____/|_____/|_____/
> ```
> `
> =E2=95=94=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=
=E2=95=90=E2=95=90=E2=95=90=E2=95=90Welcome to =
FreeBSD=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=
=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=97 s` =
`.....---.......--.```
> -/
> =E2=95=91 =E2=95=91 +o =
.--` /y:`
> +.
> =E2=95=91 1. Boot Multi user [Enter] =E2=95=91 yo`:. =
:o
> `+-
> =E2=95=91 2. Boot Single user =E2=95=91 y/ =
-/` -o/
> =E2=95=91 3. Escape to loader prompt =E2=95=91 .-
> ::/sy+:.
> =E2=95=91 4. Reboot =E2=95=91 / =
`--
> /
> =E2=95=91 =E2=95=91 `:
> :`
> =E2=95=91 Options: =E2=95=91 `:
> :`
> =E2=95=91 5. Kernel: default/kernel (1 of 1) =E2=95=91 /
> /
> =E2=95=91 6. Boot Options =E2=95=91 .-
> -.
> =E2=95=91 =E2=95=91 -- =
-.
> =E2=95=91 =E2=95=91 `:` =
`:`
> =E2=95=91 =E2=95=91 =
.-- `--.
> =
=E2=95=9A=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=
=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=
=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=
=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=
=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=90=E2=95=
=90=E2=95=9D .---.....----.
> Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop
>=20
> Loading kernel...
> /boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa94
> syms=3D[0x8+0x13aaa8+0x8+0x12610d]
> Loading configured modules...
> can't find '/boot/entropy'
> Using DTB provided by EFI at 0x8000000.
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC =
arm64
> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on =
LLVM
> 8.0.0)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT: init without driver.
> Starting CPU 1 (1)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> [...]
>=20
> Best regards,
> Marcin
>=20
> pon., 12 sie 2019 o 23:14 Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> napisa=C5=82(a):
>=20
>=20
> Soren-
>=20
> Thanks for the quick response. I built this kernel with revision =
350924.
> I'll dig into whats going on in the morning.
>=20
> Mind posting your diff for your loader.efi?
>=20
> Thanks again!
>=20
> Mit
>=20
>=20
> ----- Original Message -----
> From: "S=C3=B8ren Schmidt" <soren.schmidt@gmail.com =
<mailto:soren.schmidt@gmail.com>>
> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> Cc: "tscho" <johannes@t-beutel.com <mailto:johannes@t-beutel.com>>, =
"freebsd-arm" <
> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> Sent: Monday, August 12, 2019 3:49:48 PM
> Subject: Re: Espressobin anyone ?
>=20
> Hi
>=20
> Looks like your sources may be too old, you need to be at least at =
r348882
> to get the fix for the SD card VCC regulator.
>=20
> That change fixed it for me backported to 12-stable...
>=20
> The currdev problem still exists, I have it hardwired in my loader for
> aarch64 :)
>=20
> -S=C3=B8ren
>=20
>=20
> On 12 Aug 2019, at 21.06, Mit Matelske <mit@pt.net =
<mailto:mit@pt.net>> wrote:
>=20
> I'm having a couple little hiccups booting this board also. One has
> been commented on already, that I can't get the loader to =
automatically
> start loading the kernel on "disk0p2"...
>=20
> The second, is that the kernel can't find the SD card after booting so
> it can't mount the root filesystem. I'm using the dts/dtb and kernel =
from
> the 13-current branch.
>=20
> Thanks for any and all help. I haven't used u-boot in about decade.
> Spoiled by the x86 platform.
>=20
> Mit Matelske
>=20
>=20
> ***U-boot environment:***
>=20
>=20
> Marvell>> printenv
> baudrate=3D115200
> bootargs=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000
> root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevname=3D0
> bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload =
mmc
> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> bootdelay=3D2
> bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload =
mmc
> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> console=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000
> eth1addr=3D00:51:82:11:22:01
> eth2addr=3D00:51:82:11:22:02
> eth3addr=3D00:51:82:11:22:03
> ethact=3Dneta@30000
> ethaddr=3DF0:AD:4E:09:6B:8F
> ethprime=3Deth0
> fdt_addr=3D0x4f00000
> fdt_high=3D0xffffffffffffffff
> fdt_name=3Defi/boot/armada-3720-espressobin.dtb
> fdtcontroladdr=3D3f7161b8
> gatewayip=3D10.4.50.254
> get_images=3Dtftpboot $kernel_addr $image_name; tftpboot $fdt_addr
> $fdt_name; run get_ramfs
> get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv ramfs_addr
> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr =
-;fi
> hostname=3Dmarvell
> image_name=3Defi/freebsd/loader.efi
> initrd_addr=3D0xa00000
> initrd_size=3D0x2000000
> ipaddr=3D0.0.0.0
> kernel_addr=3D0x5000000
> loadaddr=3D0x5000000
> netdev=3Deth0
> netmask=3D255.255.255.0
> ramfs_addr=3D0x8000000
> ramfs_name=3D-
> root=3Droot=3D/dev/nfs rw
> rootpath=3D/srv/nfs/
> serverip=3D0.0.0.0
> set_bootargs=3Dsetenv bootargs $console $root
> ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
> nfsroot=3D$serverip:$rootpath $extra_params
> stderr=3Dserial@12000
> stdin=3Dserial@12000
> stdout=3Dserial@12000
>=20
>=20
> ***Full boot logs:***
>=20
>=20
> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)
>=20
> Model: Marvell Armada 3720 Community Board ESPRESSOBin
> CPU @ 1000 [MHz]
> L2 @ 800 [MHz]
> TClock @ 200 [MHz]
> DDR @ 800 [MHz]
> DRAM: 1 GiB
> U-Boot DT blob at : 000000003f7161b8
> Comphy-0: USB3 5 Gbps
> Comphy-1: PEX0 2.5 Gbps
> Comphy-2: SATA0 6 Gbps
> SATA link 0 timeout.
> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> flags: ncq led only pmp fbss pio slum part sxs
> PCIE-0: Link down
> MMC: sdhci@d0000: 0, sdhci@d8000: 1
> SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,
> total 4 MiB
> Net: eth0: neta@30000 [PRIME]
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> reading efi/freebsd/loader.efi
> 603872 bytes read in 49 ms (11.8 MiB/s)
> reading efi/boot/armada-3720-espressobin.dtb
> 15946 bytes read in 17 ms (916 KiB/s)
> ## Starting EFI application at 05000000 ...
> Scanning disk sdhci@d0000.blk <mailto:sdhci@d0000.blk>...
> Card did not respond to voltage select!
> mmc_init: -95, time 50
> Found 1 disks
> Consoles: EFI console
> FreeBSD/arm64 EFI loader, Revision 1.1
>=20
> Command line arguments: loader.efi
> EFI version: 2.05
> EFI Firmware: Das U-boot (rev 0.00)
> Console: efi (0)
> Failed to find bootable partition
> Startup error in /boot/lua/loader.lua: seconds
> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
>=20
> can't load 'kernel'
>=20
> Type '?' for a list of commands, 'help' for more detailed help.
> OK
> OK set currdev=3Ddisk0p2
> OK boot
>=20
> /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94
> syms=3D[0x8+0x137dd8+0x8+0x126260]
> Using DTB provided by EFI at 0x8000000.
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994
> The Regents of the University of California. All rights =
reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT GENERIC arm64
> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
> LLVM 6.0.1)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT: init without driver.
> Starting CPU 1 (1)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> arc4random: WARNING: initial seeding bypassed the cryptographic random
> device because it was not yet seeded and the knob =
'bypass_before_seeding'
> was enabled.
> random: entropy device external interface
> MAP 3e681000 mode 2 pages 1
> MAP 3ffa6000 mode 2 pages 1
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> simplebus1: <Flattened device tree simple bus> on simplebus0
> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> gic0: <ARM Generic Interrupt Controller v3.0> mem
> =
0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d=
91fff,0x1da0000-0x1dbffff
> irq 27 on simplebus1
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
> simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality =
1000
> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
> simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
> simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
> simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
> simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpu1: <Open Firmware CPU> on cpulist0
> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on
> simplebus1
> uart0: console (115200,n,8,1)
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> 0x13800-0x138ff,0x13c00-0x13c1f irq =
28,29,30,31,32,33,34,35,36,37,38,39 on
> simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
> mvneta0: version is 10
> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
> mdio0: <MDIO> on mvneta0
> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
> e6000sw0: <Marvell 88E6341> on mdio0
> e6000sw0: multi-chip addressing mode (0x1)
> e6000sw0: CPU port at 0
> e6000sw0: fixed port at 0
> e6000sw0: PHY at port 1
> miibus0: <MII bus> on e6000sw0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> e6000sw0: PHY at port 2
> miibus1: <MII bus> on e6000sw0
> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> e6000sw0: PHY at port 3
> miibus2: <MII bus> on e6000sw0
> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> e6000sw0: switch is ready.
> etherswitch0: <Switch controller> on e6000sw0
> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on
> simplebus1
> xhci0: 32 bytes context size, 32-bit DMA
> usbus0 on xhci0
> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq
> 17 on simplebus1
> usbus1: EHCI version 1.0
> usbus1 on ehci0
> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with =
FBS
> ahcich0: <AHCI channel> at channel 0 on ahci0
> device_attach: ahcich0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> cryptosoft0: <software crypto>
> Timecounters tick every 1.000 msec
> mvneta0: link state changed to UP
> e6000sw0port1: link state changed to DOWN
> e6000sw0port2: link state changed to DOWN
> e6000sw0port3: link state changed to DOWN
> usbus0: 5.0Gbps Super Speed USB v3.0
> usbus1: 480Mbps High Speed USB v2.0
> Release APs...done
> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
> Instruction Set Attributes 1 =3D <>
> Root mount waiting for: Processor Features 0 =3D
> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> usbus1 Processor Features 1 =3D <0>
> usbus0 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS
> Mem,MixedEndian,16bit ASID,1TB PA>
>=20
> Memory Model Features 1 =3D <>
> Memory Model Features 2 =3D <32b CCIDX,48b VA>
> Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6
> Breakpoints,PMUv3,Debug v8>
> Debug Features 1 =3D <0>
> Auxiliary Features 0 =3D <0>
> Auxiliary Features 1 =3D <0>
> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> WARNING: WITNESS option enabled, expect reduced performance.
> ugen0.1: <Generic XHCI root HUB> at usbus0
> ugen1.1: <Marvell EHCI root HUB> at usbus1
> uhub0 on usbus0
> uhub1 on usbus1
> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
> usbus0
> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 1 port with 1 removable, self powered
> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
>=20
> Loader variables:
> vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install
> vfs.root.mountfrom.options=3Dro,noatime
>=20
> Manual root filesystem specification:
> <fstype>:<device> [options]
> Mount <device> using filesystem <fstype>
> and with the specified (optional) option list.
>=20
> eg. ufs:/dev/da0s1a
> zfs:zroot/ROOT/default
> cd9660:/dev/cd0 ro
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>=20
> ? List valid disk boot devices
> . Yield 1 second (for background tasks)
> <empty line> Abort manual input
>=20
> mountroot> ?
>=20
> List of GEOM managed disk devices:
>=20
>=20
> mountroot>
> _______________________________________________
> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm =
<https://lists.freebsd.org/mailman/listinfo/freebsd-arm>;
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org =
<mailto:freebsd-arm-unsubscribe@freebsd.org>"
>=20
> _______________________________________________
> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm =
<https://lists.freebsd.org/mailman/listinfo/freebsd-arm>;
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org =
<mailto:freebsd-arm-unsubscribe@freebsd.org>"
>=20
>=20
>=20
>=20
--Apple-Mail=_E43990F4-9168-4815-8CD3-9AB5595D11CD
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=signature.asc
Content-Type: application/pgp-signature;
name=signature.asc
Content-Description: Message signed with OpenPGP
-----BEGIN PGP SIGNATURE-----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=srov
-----END PGP SIGNATURE-----
--Apple-Mail=_E43990F4-9168-4815-8CD3-9AB5595D11CD--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0E42E605-477E-4E65-810E-BD3A8CDE2C80>