Date: Tue, 30 Jan 1996 15:47:23 -0500 (EST) From: Jeffrey Wheat <jeff@tad.cetlink.net> To: freebsd-questions@freebsd.org Subject: Soundblaster 16 help Message-ID: <199601302047.PAA00406@tad.cetlink.net>
next in thread | raw e-mail | index | archive | help
Hi there,
I have just upgraded from NetBSD to FreeBSD 2.1R and want to get my
soundcard and cdrom to work. I have built a new kernel and I can see that
my soundcard is detected on boot-up, but I am wondering if I need to add
any devices to /dev? I tried to do a ./MAKEDEV snd and it craps out with
a bunch of errors. I tried to use "say" and it reports that there is no
/dev/dsp file. Any suggestions to get this to work? My CDROM is a sony
cd525e connected as master on a VLB IDE card. I have been able to mount
cd's and there seems to be no problems accessing the drive. How would I
go about playing music cd's in it? Many thanks in advance! Attached are
my dmesg dumps and kernel CONF file.
-jeff
# dmesg
FreeBSD 2.1.0-RELEASE #1: Mon Jan 29 19:27:44 EST 1996
root@tad.cetlink.net:/usr/src/sys/compile/TAD
CPU: i486DX (486-class CPU)
real memory = 16777216 (16384K bytes)
avail memory = 14729216 (14384K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 9 on isa
ed0: address 00:c0:f0:06:c5:c6, type NE2000 (16 bit)
ed1 at 0x360-0x37f irq 10 on isa
ed1: address 00:00:b4:64:27:04, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <OTI-SCYLLA/ V1.31>, removable, intr, iordy
atapi0.0: unknown phase
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "SEAGATE ST12550N 0014" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 2040MB (4178874 512 byte sectors)
sd0(aha0:0:0): with 2708 cyls, 19 heads, and an average 81 sectors/track
(aha0:2:0): "HP HP35480A 1109" type 1 removable SCSI 2
st0(aha0:2:0): Sequential-Access density code 0x13, variable blocks, write-enabled
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 7 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 at 0x0 drq 7 on isa
sbxvo0: <SoundBlaster 16 4.13>
sbmidi0 at 0x300 on isa
<SoundBlaster MPU-401>
wcd0: media changed
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $
#
machine "i386"
#cpu "I386_CPU"
cpu "I486_CPU"
#cpu "I586_CPU"
ident TAD
maxusers 32
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on sd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
device wcd0 #IDE CD-ROM
#controller ncr0
#controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller ahc1 at isa? bio irq ? vector ahcintr
#controller ahb0 at isa? bio irq ? vector ahbintr
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
#controller matcd0 at isa? port 0x230 bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
options XSERVER # include code for XFree86
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
#device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
#device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device lpt2 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
device ed0 at isa? port 0x280 net irq 9 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x360 net irq 10 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
###############
#
options USER_LDT #allow user-level control of i386 ldt
# Enable the kernel debugger.
#
options DDB
#
# KTRACE enables the system-call tracing facility ktrace(2).
#
options KTRACE #kernel tracing
#
pseudo-device bpfilter 4 #Berkeley packet filter
options GATEWAY #internetwork gateway
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
options IPACCT #ipaccounting
# dropped packets
options QUOTA #enable disk quotas
options SCSI_REPORT_GEOMETRY
pseudo-device log #Kernel syslog interface (/dev/klog)
pseudo-device gzip #Exec gzipped a.out's
pseudo-device vn #Vnode driver (turns a file into a device)
#options "TUNE_1542"
# Audio drivers: `snd', `sb', `pas', `gus', `pca'
#
# snd: Voxware sound support code
# sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
# sbxvi: SoundBlaster 16
# sbmidi: SoundBlaster 16 MIDI interface
#
# Beware! The addresses specified below are also hard-coded in
# i386/isa/sound/sound_config.h. If you change the values here, you
# must also change the values in the include file.
#
# pca: PCM audio through your PC speaker
#
# If you don't have a lpt0 device at IRQ 7, you can remove the
# ``conflicts'' specification in the appropriate device entries below.
#
# The i386/isa/sound/sound.doc has more information.
# Controls all sound devices
controller snd0
device sb0 at isa? port 0x220 irq 7 drq 1 vector sbintr
device sbxvi0 at isa? drq 7
# Not controlled by `snd'
#device pca0 at isa? port IO_TIMER1 tty
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199601302047.PAA00406>