Date: Tue, 31 Aug 2004 16:23:52 +0200 From: "=?iso-8859-15?Q?Jos=E9?= M. =?iso-8859-15?Q?Fandi=F1o?=" <bsdalpha@fadesa.es> To: freebsd-alpha@freebsd.org Subject: miata hangs on boot with 5.3-BETA2-alpha-bootonly.iso image Message-ID: <413489F8.2A043E20@fadesa.es>
next in thread | raw e-mail | index | archive | help
Hello,
While testing BETA2 the box hangs at xl0 detection.
Below I attach boot output from 5.3-BETA2 and if you
read the next boot you will see a normal (and successful)
boot with 5.2.1-RELEASE.
Any idea about the problem?
(if you need some other info don't hesitate to request it)
thank you.
(boot dka0.0.0.107.0 -file kernel -flags a)
block 0 of dka0.0.0.107.0 is a valid boot block
reading 409 blocks from dka0.0.0.107.0
bootstrap code read in
base = 1e6000, image_start = 0, image_bytes = 33200
initializing HWRPB at 2000
initializing page table at 1d8000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000000010114
OSF PAL rev: 0x1000000020116
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 30 03:48:07 UTC 2004)
Memory: 196608 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5b77f0+0x4d110 syms=[0x8+0x68b20+0x8+0x5564f]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000346fe0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Mon Aug 30 17:59:15 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Digital Personal Workstation (Miata)
Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020116
real memory = 199327744 (190 MB)
avail memory = 181272576 (172 MB)
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x81181000-0x8118107f irq 0 at device 3.0 on pci0
miibus0: <MII bus> on dc0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 08:00:2b:86:85:93
dc0: interrupting at CIA irq 0
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x90a0-0x90af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 238 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata0: interrupting at ISA irq 14
ata1: channel #1 on atapci0
ata1: interrupting at ISA irq 15
atapci1: <GENERIC ATA controller> port 0x377-0x37a,0x170-0x177 mem 0x81170000-0x8117ffff irq 239 at device 7.2 on pci0
atapci1: failed: rid 0x20 is memory, requested 4
atapci1: unable to map interrupt
ata2: channel #0 on atapci1
device_attach: ata2 attach returned 6
ohci0: <OHCI (generic) USB controller> mem 0x81180000-0x81180fff irq 234 at device 7.3 on pci0
ohci0: interrupting at ISA irq 10
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <display, VGA> at device 12.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 20.0 on pci0
pci1: <PCI bus> on pcib1
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem 0x81030000-0x81030fff irq 3 at device 4.0 on pci1
isp0: interrupting at CIA irq 3
isp0: [GIANT-LOCKED]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x8100-0x817f mem 0x81031000-0x8103107f irq 12 at device 8.0 on pci1
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:02:1a:20:1c
xl0: interrupting at CIA irq 12
xl0: [GIANT-LOCKED]
/-------------/
>>>boot
(boot dkc0.0.0.1004.0 -file kernel -flags a)
block 0 of dkc0.0.0.1004.0 is a valid boot block
reading 15 blocks from dkc0.0.0.1004.0
bootstrap code read in
base = 1e6000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1d8000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Loading /boot/loader
Console: SRM firmware console
VMS PAL rev: 0x1000000010114
OSF PAL rev: 0x1000000020116
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.2
(root@demonio.servidores.fadesa, Fri Feb 27 15:29:55 CET 2004)
Memory: 196608 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x4c75e0+0x42540 syms=[0x8+0x66e10+0x8+0x5044c]
/boot/kernel/if_xl.ko text=0xa758 data=0xcc8+0x8 syms=[0x8+0x1200+0x8+0xbdb]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc0000343840...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Thu Feb 26 18:53:44 CET 2004
root@demonio.servidores.fadesa:/usr/src/sys/alpha/compile/NUCLEO
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00008e2000.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xfffffc00008e20d0.
Digital Personal Workstation (Miata)Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020116
real memory = 199327744 (190 MB)
avail memory = 185409536 (176 MB)
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x81181000-0x8118107f irq 0 at device 3.0 on pci0
dc0: Ethernet address: 08:00:2b:86:85:93
miibus0: <MII bus> on dc0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: interrupting at CIA irq 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x90a0-0x90af,0x3f4-0x3f7,0x1f0-0x1f7 irq 238 at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port 0x374-0x377,0x170-0x177 mem 0x81170000-0x8117ffff irq 239 at device 7.2 on pci0
atapci1: unable to map interrupt
ohci0: <OHCI (generic) USB controller> mem 0x81180000-0x81180fff irq 234 at device 7.3 on pci0
ohci0: interrupting at ISA irq 10
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <display, VGA> at device 12.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 20.0 on pci0
pci1: <PCI bus> on pcib1
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem 0x81030000-0x81030fff irq 3 at device 4.0 on pci1
isp0: interrupting at CIA irq 3
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x8100-0x817f mem 0x81031000-0x8103107f irq 12 at device 8.0 on pci1
xl0: Ethernet address: 00:01:02:1a:20:1c
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: interrupting at CIA irq 12
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <ESS ES1888> at port 0x220-0x22f irq 5 drq 1 on isa0
sbc0: interrupting at ISA irq 5
pcm0: <ESS 18xx DSP> on sbc0
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 499872094 Hz quality 0
Timecounters tick every 0.976 msec
acd0: CDROM <Compaq CRD-8322B> at ata0-master BIOSPIO
Waiting 5 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xfffffc0000c40868
GEOM: create disk da1 dp=0xfffffc0000bfe468
GEOM: create disk da2 dp=0xfffffc0000bfd468
GEOM: create disk da3 dp=0xfffffc0000bfd068
sa0 at isp0 bus 0 target 5 lun 0
sa0: <DEC TLZ10 (C) DEC 04a8> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da0 at isp0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da1 at isp0 bus 0 target 1 lun 0
da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da2 at isp0 bus 0 target 2 lun 0
da2: <COMPAQ BB00921B91 3B05> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da3 at isp0 bus 0 target 6 lun 0
da3: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da3: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
Mounting root from ufs:/dev/da0a
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
vinum: loaded
vinum: reading configuration from /dev/da1e
vinum: updating configuration from /dev/da3e
swapon: adding /dev/da0b as swap device
Starting file system checks:
/dev/da0a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0a: clean, 98179 free (1435 frags, 12093 blocks, 1.1% fragmentation)
/dev/vinum/datos-vol: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/vinum/datos-vol: clean, 919148 free (6444 frags, 114088 blocks, 0.3% fragmentation)
/dev/da0e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0e: clean, 74148 free (28 frags, 9265 blocks, 0.0% fragmentation)
/dev/da0f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0f: clean, 253813 free (21 frags, 31724 blocks, 0.0% fragmentation)
/dev/da2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da2a: clean, 1843392 free (192 frags, 230400 blocks, 0.0% fragmentation)
/dev/da0g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0g: clean, 112573 free (181 frags, 14049 blocks, 0.1% fragmentation)
/--------------/
root@demonio:~> pciconf -l -v
dc0@pci0:3:0: class=0x020000 card=0x00000000 chip=0x00191011 rev=0x30 hdr=0x00
vendor = 'Digital Equipment Corporation'
device = 'DC21142/3 PCI/CardBus 10/100 Mbit Ethernet Ctlr'
class = network
subclass = ethernet
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
vendor = 'Cypress Semiconductor'
device = '82C693 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
vendor = 'Cypress Semiconductor'
device = '82C693 PCI to ISA Bridge'
class = mass storage
subclass = ATA
atapci1@pci0:7:2: class=0x010100 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
vendor = 'Cypress Semiconductor'
device = '82C693 PCI to ISA Bridge'
class = mass storage
subclass = ATA
ohci0@pci0:7:3: class=0x0c0310 card=0x00000000 chip=0xc6931080 rev=0x00 hdr=0x00
vendor = 'Cypress Semiconductor'
device = '82C693 PCI to ISA Bridge'
class = serial bus
subclass = USB
none0@pci0:12:0: class=0x030000 card=0x0a321048 chip=0x3d07104c rev=0x01 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TVP4020 AGP Permedia 2'
class = display
subclass = VGA
pcib1@pci0:20:0: class=0x060400 card=0x000000dc chip=0x00241011 rev=0x03 hdr=0x01
vendor = 'Digital Equipment Corporation'
device = '21151/2 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
isp0@pci1:4:0: class=0x010000 card=0x00000000 chip=0x10201077 rev=0x05 hdr=0x00
vendor = 'QLogic Corporation'
device = 'QLA1020/104x Fast-Wide-SCSI "Fast!SCSI IQ" Host Adapter'
class = mass storage
subclass = SCSI
xl0@pci1:8:0: class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x74 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905C-TX Fast EtherLink for PC Management NIC'
class = network
subclass = ethernet
--
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS/IT d- s+:+() a- C+++ UBL+++$ P+ L+++ E--- W++ N+ o++ K- w---
O+ M+ V- PS+ PE+ Y++ PGP+>+++ t+ 5 X+$ R- tv-- b+++ DI D++>+++
G++ e- h+(++) !r !z
------END GEEK CODE BLOCK------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?413489F8.2A043E20>