Date: Tue, 05 Aug 2014 08:13:53 +0100 From: Dominic Froud <dom@talk2dom.com> To: freebsd-multimedia@freebsd.org Subject: Re: PVR-250 with FreeBSD 10.0? Message-ID: <53E08431.80500@talk2dom.com> In-Reply-To: <20140803223426.GA6710@RawFedDogs.net> References: <20140802230415.GA13384@RawFedDogs.net> <53DDEFAE.4060005@talk2dom.com> <20140803133916.GA27934@RawFedDogs.net> <20140803223426.GA6710@RawFedDogs.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/08/2014 23:34, Kevin Monceaux wrote: > On Sun, Aug 03, 2014 at 08:39:17AM -0500, Kevin Monceaux wrote: > >> Thanks for the help. I was able to build and install the port successfully. >> But, when issuing a "kldload cxm" it loads the module, but I get: >> >> device_attach: cxm0 attach returned 6 > I probably should have posted all the messages produced when loading the cxm > module in case they give any clues: > > cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf0000000-0xf3ffffff irq 18 at device 2.0 on pci4 > cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 > iicbb0: <I2C bit-banging driver> on cxm_iic0 > iicbus0: <Philips I2C bus> on iicbb0 master-only > cxm0: Temic 4036 FY5 tuner > cxm0: SAA7115 rev 1 video decoder > cxm0: MSP4448G-A2 audio decoder > cxm0: could not initialize IR remote > iicbus0: detached > iicbb0: detached > cxm_iic0: detached > device_attach: cxm0 attach returned 6 > > It looks like it's at least recognizing the card and tuner. Does anyone > have any suggestions? > > > From memory I think the error 6 is due to not attaching properly. My kernel spits out these messages: Aug 2 18:37:28 hairball pkg-static: pvr250-20101010_1 installed Aug 2 18:37:34 hairball kernel: warning: KLD '/boot/kernel/cxm_iic.ko' is newer than the linker.hints file Aug 2 18:37:38 hairball kernel: cxm0: <Conexant iTVC16 MPEG Coder> mem 0xf4000000-0xf7ffffff at device 6.0 on pci1 Aug 2 18:37:38 hairball kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Aug 2 18:37:38 hairball kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Aug 2 18:37:38 hairball kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Aug 2 18:37:38 hairball kernel: cxm0: Temic 4006 FH5 tuner Aug 2 18:37:38 hairball kernel: cxm0: SAA7115 rev 1 video decoder Aug 2 18:37:38 hairball kernel: cxm0: MSP3415G-B8 audio decoder Aug 2 18:37:38 hairball kernel: cxm0: IR Remote Aug 2 18:37:38 hairball kernel: cxm0: [GIANT-LOCKED] Aug 2 18:37:38 hairball kernel: cxm0: encoder firmware version 0x2040011 What version of pvr250 are you using? Mine is: [root@hairball /usr/ports/multimedia/pvr250]# pkg info -I pvr250 pvr250-20101010_1 Hauppauge PVR-250/350 TV cards driver for the cxm device [root@hairball /usr/ports/multimedia/pvr250]# Dominic
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53E08431.80500>