Date: Wed, 08 Jan 2014 20:45:37 +1100 From: Graham Menhennitt <graham@menhennitt.com.au> To: =?ISO-8859-1?Q?Jean-S=E9bastien_P=E9dron?= <jean-sebastien.pedron@dumbbell.fr>, freebsd-stable@freebsd.org Subject: Re: X not working on AMD64 Radeon after upgrading 9-Stable to 10-RC3 Message-ID: <52CD1E41.5010607@menhennitt.com.au> In-Reply-To: <52C9B483.5060209@dumbbell.fr> References: <52C6846A.8010304@menhennitt.com.au> <52C7F922.6010204@FreeBSD.org> <52C8F9AA.1090207@menhennitt.com.au> <52C9B483.5060209@dumbbell.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06/01/2014 06:37, Jean-Sébastien Pédron wrote: > On 05.01.2014 07:20, Graham Menhennitt wrote: >> Also, I can't use Alt-F1 etc. to switch to other virtual consoles. And I >> can't seem to kill X - I need to reboot. But both of those are very >> minor problems. > This is expected unfortunately: our console driver (syscons) doesn't > support the new kernel video drivers. This means that once X.Org is > started, it's not possible to switch to the console, or have a console > back when closing the X session. > > This problem is fixed in HEAD (11-CURRENT) if you use the new console > driver (vt(9), previously referred to as "Newcons"). Like I said, it's not really a problem. So I won't bother doing that. > > About errors in dmesg(8), I answer below: > >> info: [drm] Loading RS690/RS740 Microcode >> info: [drm] radeon: ring at 0x00000000A0001000 >> error: [drm:pid1162:r100_ring_test] *ERROR* radeon: ring test failed >> (scratch(0x15E4)=0xCAFEDEAD) >> error: [drm:pid1162:r100_cp_init] *ERROR* radeon: cp isn't working (-22). >> drmn0: error: failed initializing CP (-22). > Those errors are unexpected. Could you please try with Ubuntu 13.04 live > CD, and check if the same errors occur? > Ok, I've included the output of dmesg from Ubuntu 13.04 AMD64. I couldn't get as far as running X from the live CD though - there was an error about not being able to find /sbin/init and I got dumped into a BusyBox shell with a prompt of "initramfs". But dmesg contains "drm" and "radeon" bits, so I hope it's enough. No errors though. Thanks again for you help. Graham [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8) [ 0.000000] Command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000187ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA69GM-S2H/GA-MA69GM-S2H, BIOS F4 12/07/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x188000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 00CFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FF80000000 write-back [ 0.000000] 5 base 0180000000 mask FFF8000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000188000000 aka 6272M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC [ 0.000000] reg 4, base: 4GB, range: 2GB, type WB [ 0.000000] reg 5, base: 6GB, range: 128MB, type WB [ 0.000000] total RAM covered: 3327M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5050-0x000f505f] mapped at [ffff8800000f5050] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff] [ 0.000000] [mem 0x00000000-0xcfdfffff] page 2M [ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k [ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1fffa000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x187ffffff] [ 0.000000] [mem 0x100000000-0x187ffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x187ffffff @ [mem 0xcfedc000-0xcfedffff] [ 0.000000] RAMDISK: [mem 0x7eac7000-0x7fffffff] [ 0.000000] ACPI: RSDP 00000000000f6a10 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee30c0 048EF (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: SSDT 00000000cfee7a80 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfee7d40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee7d80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee79c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000187ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x187ffffff] [ 0.000000] NODE_DATA [mem 0x187ffb000-0x187ffffff] [ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880182000000-ffff8801875fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x187ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xcfedffff] [ 0.000000] node 0: [mem 0x100000000-0x187ffffff] [ 0.000000] On node 0 totalpages: 1408623 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13244 pages used for memmap [ 0.000000] DMA32 zone: 834340 pages, LIFO batch:31 [ 0.000000] Normal zone: 8704 pages used for memmap [ 0.000000] Normal zone: 548352 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880187c00000 s85056 r8192 d21440 u524288 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1386605 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 5376816k/6422528k available (7006k kernel code, 788036k absent, 257676k reserved, 6238k data, 992k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 22544384 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2505.730 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5011.46 BogoMIPS (lpj=10022920) [ 0.008010] pid_max: default: 32768 minimum: 301 [ 0.008047] Security Framework initialized [ 0.008064] AppArmor: AppArmor initialized [ 0.008065] Yama: becoming mindful. [ 0.008920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016454] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.019769] Mount-cache hash table entries: 256 [ 0.020209] Initializing cgroup subsys cpuacct [ 0.020212] Initializing cgroup subsys memory [ 0.020225] Initializing cgroup subsys devices [ 0.020227] Initializing cgroup subsys freezer [ 0.020230] Initializing cgroup subsys blkio [ 0.020232] Initializing cgroup subsys perf_event [ 0.020235] Initializing cgroup subsys hugetlb [ 0.020268] tseg: 00cff00000 [ 0.020270] CPU: Physical Processor ID: 0 [ 0.020271] CPU: Processor Core ID: 0 [ 0.020274] mce: CPU supports 5 MCE banks [ 0.020280] LVT offset 0 assigned for vector 0xf9 [ 0.020287] process: using AMD E400 aware idle routine [ 0.020290] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.020290] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.020290] tlb_flushall_shift: 4 [ 0.020414] Freeing SMP alternatives: 24k freed [ 0.022066] ACPI: Core revision 20121018 [ 0.028043] ftrace: allocating 26689 entries in 105 pages [ 0.044526] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084225] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (fam: 0f, model: 6b, stepping: 02) [ 0.088000] Performance Events: AMD PMU driver. [ 0.088000] ... version: 0 [ 0.088000] ... bit width: 48 [ 0.088000] ... generic registers: 4 [ 0.088000] ... value mask: 0000ffffffffffff [ 0.088000] ... max period: 00007fffffffffff [ 0.088000] ... fixed-purpose events: 0 [ 0.088000] ... event mask: 000000000000000f [ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.088000] smpboot: Booting Node 0, Processors #1 [ 0.176127] Brought up 2 CPUs [ 0.176130] smpboot: Total of 2 processors activated (10022.74 BogoMIPS) [ 0.176788] devtmpfs: initialized [ 0.177846] EVM: security.selinux [ 0.177848] EVM: security.SMACK64 [ 0.177850] EVM: security.capability [ 0.177872] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes) [ 0.180208] regulator-dummy: no parameters [ 0.180281] NET: Registered protocol family 16 [ 0.180417] node 0 link 0: io port [d000, ffff] [ 0.180420] TOM: 00000000d8000000 aka 3456M [ 0.180423] node 0 link 0: mmio [a0000, bffff] [ 0.180425] node 0 link 0: mmio [d8000000, dfffffff] [ 0.180427] node 0 link 0: mmio [e0000000, fe02ffff] [ 0.180430] node 0 link 0: mmio [e0000000, efffffff] [ 0.180431] TOM2: 0000000188000000 aka 6272M [ 0.180434] bus: [bus 00-02] on node 0 link 0 [ 0.180436] bus: 00 [io 0x0000-0xffff] [ 0.180438] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.180439] bus: 00 [mem 0xd8000000-0xffffffff] [ 0.180440] bus: 00 [mem 0x188000000-0xfcffffffff] [ 0.180501] ACPI: bus type pci registered [ 0.180564] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.180567] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.193790] PCI: Using configuration type 1 for base access [ 0.194943] bio: create slab <bio-0> at 0 [ 0.194943] ACPI: Added _OSI(Module Device) [ 0.194943] ACPI: Added _OSI(Processor Device) [ 0.194943] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.194943] ACPI: Added _OSI(Processor Aggregator Device) [ 0.194943] ACPI: EC: Look up EC in DSDT [ 0.196756] ACPI: Executed 1 blocks of module-level executable AML code [ 0.200016] ACPI: Interpreter enabled [ 0.200021] ACPI: (supports S0 S1 S4 S5) [ 0.200039] ACPI: Using IOAPIC for interrupt routing [ 0.206778] ACPI: No dock devices found. [ 0.206786] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.206860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.206863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.207087] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.207090] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.207093] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.207096] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.207099] pci_root PNP0A03:00: host bridge window [mem 0xd8000000-0xfebfffff] (ignored) [ 0.207101] PCI: root bus 00: hardware-probed resources [ 0.207141] PCI host bridge to bus 0000:00 [ 0.207145] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.207147] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.207150] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.207153] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xffffffff] [ 0.207155] pci_bus 0000:00: root bus resource [mem 0x188000000-0xfcffffffff] [ 0.207164] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 [ 0.207195] pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 [ 0.207253] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f [ 0.207272] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07] [ 0.207283] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03] [ 0.207294] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07] [ 0.207304] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03] [ 0.207315] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f] [ 0.207326] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.207349] pci 0000:00:12.0: set SATA to AHCI mode [ 0.207391] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 [ 0.207406] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.207480] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 [ 0.207495] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.207567] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 [ 0.207582] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.207653] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 [ 0.207668] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.207740] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 [ 0.207755] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.207833] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 [ 0.207854] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.207942] pci 0000:00:13.5: supports D1 D2 [ 0.207944] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.207971] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.208017] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.208108] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a [ 0.208123] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.208133] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.208144] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.208154] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.208165] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f] [ 0.208209] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.208232] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.208303] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.208324] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 [ 0.208406] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.208458] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.208481] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.208498] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.208516] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.208564] pci 0000:01:05.0: [1002:791e] type 00 class 0x030000 [ 0.208574] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.208581] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff 64bit] [ 0.208586] pci 0000:01:05.0: reg 20: [io 0xee00-0xeeff] [ 0.208591] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff] [ 0.208607] pci 0000:01:05.0: supports D1 D2 [ 0.208620] pci 0000:01:05.2: [1002:7919] type 00 class 0x040300 [ 0.208630] pci 0000:01:05.2: reg 10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.208670] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.208674] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.208677] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.208681] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.208724] pci 0000:02:07.0: [104c:8020] type 00 class 0x0c0010 [ 0.208748] pci 0000:02:07.0: reg 10: [mem 0xfddff000-0xfddff7ff] [ 0.208762] pci 0000:02:07.0: reg 14: [mem 0xfddf4000-0xfddf7fff] [ 0.208858] pci 0000:02:07.0: supports D2 [ 0.208861] pci 0000:02:07.0: PME# supported from D2 D3hot [ 0.208898] pci 0000:02:0e.0: [104c:8024] type 00 class 0x0c0010 [ 0.208923] pci 0000:02:0e.0: reg 10: [mem 0xfddfe000-0xfddfe7ff] [ 0.208936] pci 0000:02:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff] [ 0.209033] pci 0000:02:0e.0: supports D1 D2 [ 0.209036] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.209064] pci 0000:02:0f.0: [10ec:8167] type 00 class 0x020000 [ 0.209086] pci 0000:02:0f.0: reg 10: [io 0xde00-0xdeff] [ 0.209099] pci 0000:02:0f.0: reg 14: [mem 0xfddfd000-0xfddfd0ff] [ 0.209154] pci 0000:02:0f.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.209192] pci 0000:02:0f.0: supports D1 D2 [ 0.209194] pci 0000:02:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.209232] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.209237] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.209242] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.209247] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.209250] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.209253] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.209256] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xffffffff] (subtractive decode) [ 0.209259] pci 0000:00:14.4: bridge window [mem 0x188000000-0xfcffffffff] (subtractive decode) [ 0.209316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.209413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.209450] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.209453] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.210624] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210671] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210716] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210803] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210847] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210891] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.210934] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.211052] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.211052] vgaarb: loaded [ 0.211052] vgaarb: bridge control possible 0000:01:05.0 [ 0.211052] SCSI subsystem initialized [ 0.211052] ACPI: bus type scsi registered [ 0.211052] libata version 3.00 loaded. [ 0.211052] ACPI: bus type usb registered [ 0.211052] usbcore: registered new interface driver usbfs [ 0.211052] usbcore: registered new interface driver hub [ 0.211052] usbcore: registered new device driver usb [ 0.211052] PCI: Using ACPI for IRQ routing [ 0.220839] PCI: pci_cache_line_size set to 64 bytes [ 0.220921] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.220923] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff] [ 0.221042] NetLabel: Initializing [ 0.221043] NetLabel: domain hash size = 128 [ 0.221044] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.221057] NetLabel: unlabeled traffic allowed by default [ 0.221075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.221075] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.222083] Switching to clocksource hpet [ 0.229096] AppArmor: AppArmor Filesystem Enabled [ 0.229138] pnp: PnP ACPI init [ 0.229160] ACPI: bus type pnp registered [ 0.229300] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.229303] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.229306] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.229311] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229539] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:02:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.229564] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.229567] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.229570] system 00:01: [io 0x040b] has been reserved [ 0.229572] system 00:01: [io 0x04d6] has been reserved [ 0.229575] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.229578] system 00:01: [io 0x0c14] has been reserved [ 0.229581] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.229584] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.229587] system 00:01: [io 0x0c6f] has been reserved [ 0.229590] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.229593] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.229596] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.229599] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.229602] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.229605] system 00:01: [io 0x0b00-0x0b1f] could not be reserved [ 0.229608] system 00:01: [io 0x0238-0x023f] has been reserved [ 0.229617] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.229621] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229730] pnp 00:02: [dma 4] [ 0.229757] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.229829] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.229881] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.229908] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.229947] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.230112] pnp 00:07: [dma 2] [ 0.230150] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.230462] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.230707] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.230833] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.230904] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.230907] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.231116] system 00:0c: [mem 0x000cd600-0x000cffff] has been reserved [ 0.231120] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.231123] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.231126] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.231129] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.231132] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.231135] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.231138] system 00:0c: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.231141] system 00:0c: [mem 0xcfff0000-0xd7feffff] could not be reserved [ 0.231145] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.231148] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.231151] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.231155] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.231173] pnp: PnP ACPI: found 13 devices [ 0.231175] ACPI: ACPI bus type pnp unregistered [ 0.238498] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.238504] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.238508] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.238511] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.238520] pci 0000:02:0f.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] [ 0.238523] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.238527] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff] [ 0.238533] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.238538] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.238556] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.238559] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.238562] pci_bus 0000:00: resource 6 [mem 0xd8000000-0xffffffff] [ 0.238564] pci_bus 0000:00: resource 7 [mem 0x188000000-0xfcffffffff] [ 0.238568] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.238570] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.238573] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.238576] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.238579] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.238581] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff pref] [ 0.238584] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.238587] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff] [ 0.238590] pci_bus 0000:02: resource 6 [mem 0xd8000000-0xffffffff] [ 0.238592] pci_bus 0000:02: resource 7 [mem 0x188000000-0xfcffffffff] [ 0.238648] NET: Registered protocol family 2 [ 0.238893] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.239738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.240591] TCP: Hash tables configured (established 65536 bind 65536) [ 0.240715] TCP: reno registered [ 0.240734] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.240859] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.241071] NET: Registered protocol family 1 [ 0.660085] pci 0000:01:05.0: Boot video device [ 0.660100] PCI: CLS 4 bytes, default 64 [ 0.660181] Trying to unpack rootfs image as initramfs... [ 5.797650] Freeing initrd memory: 21732k freed [ 5.813513] PCI-DMA: Disabling AGP. [ 5.813623] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 5.813624] PCI-DMA: using GART IOMMU. [ 5.813629] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 5.818538] Initialise module verification [ 5.818602] audit: initializing netlink socket (disabled) [ 5.818615] type=2000 audit(1389172110.812:1): initialized [ 5.848498] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.850607] VFS: Disk quotas dquot_6.5.2 [ 5.850667] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.851345] fuse init (API version 7.20) [ 5.851453] msgmni has been set to 10672 [ 5.852165] Key type asymmetric registered [ 5.852167] Asymmetric key parser 'x509' registered [ 5.852210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 5.852255] io scheduler noop registered [ 5.852259] io scheduler deadline registered (default) [ 5.852266] io scheduler cfq registered [ 5.852455] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.852472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.852607] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.852613] ACPI: Power Button [PWRB] [ 5.852664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.852667] ACPI: Power Button [PWRF] [ 5.855455] GHES: HEST is not enabled! [ 5.855563] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.876110] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.877951] Linux agpgart interface v0.103 [ 5.879579] brd: module loaded [ 5.880557] loop: module loaded [ 5.881027] libphy: Fixed MDIO Bus: probed [ 5.881108] tun: Universal TUN/TAP device driver, 1.6 [ 5.881109] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 5.881169] PPP generic driver version 2.4.2 [ 5.881223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.881225] ehci-pci: EHCI PCI platform driver [ 5.881285] ehci-pci 0000:00:13.5: EHCI Host Controller [ 5.881296] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 5.881308] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 5.881324] ehci-pci 0000:00:13.5: debug port 1 [ 5.881389] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000 [ 5.892021] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 5.892061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.892064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.892066] usb usb1: Product: EHCI Host Controller [ 5.892069] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd [ 5.892071] usb usb1: SerialNumber: 0000:00:13.5 [ 5.892211] hub 1-0:1.0: USB hub found [ 5.892216] hub 1-0:1.0: 10 ports detected [ 5.892427] ehci-platform: EHCI generic platform driver [ 5.892436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.892477] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 5.892485] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 5.892519] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 5.952024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.952027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.952030] usb usb2: Product: OHCI Host Controller [ 5.952032] usb usb2: Manufacturer: Linux 3.8.0-19-generic ohci_hcd [ 5.952035] usb usb2: SerialNumber: 0000:00:13.0 [ 5.952135] hub 2-0:1.0: USB hub found [ 5.952142] hub 2-0:1.0: 2 ports detected [ 5.952250] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 5.952257] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 5.952289] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 6.012020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.012023] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.012025] usb usb3: Product: OHCI Host Controller [ 6.012028] usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd [ 6.012030] usb usb3: SerialNumber: 0000:00:13.1 [ 6.012129] hub 3-0:1.0: USB hub found [ 6.012136] hub 3-0:1.0: 2 ports detected [ 6.012242] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 6.012250] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 6.012279] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 6.072022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.072025] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.072027] usb usb4: Product: OHCI Host Controller [ 6.072030] usb usb4: Manufacturer: Linux 3.8.0-19-generic ohci_hcd [ 6.072032] usb usb4: SerialNumber: 0000:00:13.2 [ 6.072128] hub 4-0:1.0: USB hub found [ 6.072135] hub 4-0:1.0: 2 ports detected [ 6.072241] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 6.072248] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 6.072263] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 6.132019] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.132022] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.132024] usb usb5: Product: OHCI Host Controller [ 6.132026] usb usb5: Manufacturer: Linux 3.8.0-19-generic ohci_hcd [ 6.132029] usb usb5: SerialNumber: 0000:00:13.3 [ 6.132144] hub 5-0:1.0: USB hub found [ 6.132151] hub 5-0:1.0: 2 ports detected [ 6.132261] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 6.132271] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 6.132286] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 6.192020] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.192023] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.192025] usb usb6: Product: OHCI Host Controller [ 6.192027] usb usb6: Manufacturer: Linux 3.8.0-19-generic ohci_hcd [ 6.192030] usb usb6: SerialNumber: 0000:00:13.4 [ 6.192129] hub 6-0:1.0: USB hub found [ 6.192136] hub 6-0:1.0: 2 ports detected [ 6.192228] uhci_hcd: USB Universal Host Controller Interface driver [ 6.192307] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 6.192308] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 6.192467] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.192613] mousedev: PS/2 mouse device common for all mice [ 6.192777] rtc_cmos 00:04: RTC can wake from S4 [ 6.192910] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 6.192948] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 6.193071] device-mapper: uevent: version 1.0.3 [ 6.193146] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 6.193156] cpuidle: using governor ladder [ 6.193157] cpuidle: using governor menu [ 6.193161] ledtrig-cpu: registered to indicate activity on CPUs [ 6.193163] EFI Variables Facility v0.08 2004-May-17 [ 6.193462] ashmem: initialized [ 6.193609] TCP: cubic registered [ 6.193739] NET: Registered protocol family 10 [ 6.193950] NET: Registered protocol family 17 [ 6.193961] Key type dns_resolver registered [ 6.194225] Loading module verification certificates [ 6.195326] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c' [ 6.195341] registered taskstats version 1 [ 6.198577] Key type trusted registered [ 6.201508] Key type encrypted registered [ 6.204065] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.204632] rtc_cmos 00:04: setting system clock to 2014-01-08 09:08:31 UTC (1389172111) [ 6.204756] powernow-k8: fid 0x11 (2500 MHz), vid 0xa [ 6.204758] powernow-k8: fid 0x10 (2400 MHz), vid 0xb [ 6.204760] powernow-k8: fid 0xe (2200 MHz), vid 0xd [ 6.204762] powernow-k8: fid 0xc (2000 MHz), vid 0xf [ 6.204763] powernow-k8: fid 0xa (1800 MHz), vid 0x11 [ 6.204765] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 6.204794] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2 cpu cores) (version 2.20.00) [ 6.204810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.204811] EDD information not available. [ 6.206553] Freeing unused kernel memory: 992k freed [ 6.207142] Write protecting the kernel read-only data: 12288k [ 6.210955] Freeing unused kernel memory: 1176k freed [ 6.214249] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 6.215159] Freeing unused kernel memory: 1080k freed <30>[ 6.236782] udevd[97]: starting version 175 [ 6.323027] Disabling lock debugging due to kernel taint [ 6.326550] ahci 0000:00:12.0: version 3.0 [ 6.326637] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 6.326748] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 6.326753] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 6.327861] scsi0 : ahci [ 6.327970] scsi1 : ahci [ 6.328082] scsi2 : ahci [ 6.328153] scsi3 : ahci [ 6.328201] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 6.328205] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 6.328208] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 6.328211] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 6.337955] scsi4 : pata_atiixp [ 6.338872] scsi5 : pata_atiixp [ 6.339191] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 6.339195] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 6.342843] usb 1-1: New USB device found, idVendor=0bc2, idProduct=5031 [ 6.342848] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 6.342851] usb 1-1: Product: FreeAgent GoFlex [ 6.342854] usb 1-1: Manufacturer: Seagate [ 6.342856] usb 1-1: SerialNumber: NA0EDE1C [ 6.362538] [drm] Initialized drm 1.1.0 20060810 [ 6.367831] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.367923] r8169 0000:02:0f.0 (unregistered net_device): not PCI Express [ 6.368317] r8169 0000:02:0f.0 eth0: RTL8169sc/8110sc at 0xffffc90000c7c000, 00:1d:7d:d4:93:50, XID 18000000 IRQ 23 [ 6.368320] r8169 0000:02:0f.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 6.369130] Floppy drive(s): fd0 is 1.44M [ 6.388243] FDC 0 is a post-1991 82077 [ 6.435067] [drm] radeon defaulting to kernel modesetting. [ 6.435072] [drm] radeon kernel modesetting enabled. [ 6.435458] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x1458:0xD001). [ 6.435481] [drm] register mmio base: 0xFDFE0000 [ 6.435483] [drm] register mmio size: 65536 [ 6.435785] ATOM BIOS: ATI [ 6.435825] radeon 0000:01:05.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used) [ 6.435828] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 6.435858] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.435859] [drm] Driver supports precise vblank timestamp query. [ 6.435889] radeon 0000:01:05.0: irq 40 for MSI/MSI-X [ 6.435903] radeon 0000:01:05.0: radeon: using MSI. [ 6.435923] [drm] radeon: irq initialized. [ 6.436598] firewire_ohci 0000:02:07.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 6.436624] [drm] Detected VRAM RAM=128M, BAR=128M [ 6.436626] [drm] RAM width 128bits DDR [ 6.436812] [TTM] Zone kernel: Available graphics memory: 2733886 kiB [ 6.436814] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.436815] [TTM] Initializing pool allocator [ 6.436821] [TTM] Initializing DMA pool allocator [ 6.436856] [drm] radeon: 128M of VRAM memory ready [ 6.436858] [drm] radeon: 512M of GTT memory ready. [ 6.436878] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.458825] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 6.465763] [drm] PCIE GART of 512M enabled (table at 0x00000000CF900000). [ 6.465823] radeon 0000:01:05.0: WB enabled [ 6.465829] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0xffff8800cf8b3000 [ 6.465903] [drm] Loading RS690/RS740 Microcode [ 6.466090] [drm] radeon: ring at 0x00000000A0001000 [ 6.466109] [drm] ring test succeeded in 1 usecs [ 6.466226] [drm] ib test succeeded in 0 usecs [ 6.466444] [drm] Radeon Display Connectors [ 6.466446] [drm] Connector 0: [ 6.466447] [drm] VGA-1 [ 6.466449] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 6.466451] [drm] Encoders: [ 6.466452] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.466453] [drm] Connector 1: [ 6.466455] [drm] SVIDEO-1 [ 6.466456] [drm] Encoders: [ 6.466457] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 6.466458] [drm] Connector 2: [ 6.466460] [drm] HDMI-A-1 [ 6.466462] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 6.466463] [drm] Encoders: [ 6.466464] [drm] DFP3: INTERNAL_LVTM1 [ 6.501558] firewire_ohci 0000:02:0e.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2 [ 6.538815] usb 1-3: new high-speed USB device number 4 using ehci-pci [ 6.598505] [drm] fb mappable at 0xD8040000 [ 6.598507] [drm] vram apper at 0xD8000000 [ 6.598508] [drm] size 5300224 [ 6.598509] [drm] fb depth is 24 [ 6.598511] [drm] pitch is 5888 [ 6.598620] fbcon: radeondrmfb (fb0) is primary device [ 6.622135] Console: switching to colour frame buffer device 180x56 [ 6.632128] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 6.632130] radeon 0000:01:05.0: registered panic notifier [ 6.632138] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:05.0 on minor 0 [ 6.640095] ata5.01: NODEV after polling detection [ 6.648077] ata2: SATA link down (SStatus 0 SControl 300) [ 6.648117] ata1: SATA link down (SStatus 0 SControl 300) [ 6.648149] ata4: SATA link down (SStatus 0 SControl 300) [ 6.669264] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 [ 6.669268] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.669270] usb 1-3: Product: USB2.0 Hub [ 6.669672] hub 1-3:1.0: USB hub found [ 6.670012] hub 1-3:1.0: 4 ports detected [ 6.799755] Initializing USB Mass Storage driver... [ 6.799947] scsi6 : usb-storage 1-1:1.0 [ 6.800103] usbcore: registered new interface driver usb-storage [ 6.800105] USB Mass Storage support registered. [ 6.820030] ata3: softreset failed (device not ready) [ 6.820037] ata3: applying PMP SRST workaround and retrying [ 6.932035] usb 2-2: new low-speed USB device number 2 using ohci_hcd [ 6.936960] firewire_core 0000:02:07.0: created device fw0: GUID 00308d0100009e97, S400 [ 6.992044] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.004155] firewire_core 0000:02:0e.0: created device fw1: GUID 001d7d0000f3e516, S400 [ 7.034984] ata3.00: HPA detected: current 156299375, native 156301488 [ 7.034990] ata3.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133 [ 7.034992] ata3.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.034995] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 7.093286] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 7.093288] ata3.00: configured for UDMA/133 [ 7.093482] scsi 2:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5 [ 7.093695] sd 2:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 7.093744] sd 2:0:0:0: [sda] Write Protect is off [ 7.093747] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.093768] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.094073] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.102103] usb 2-2: New USB device found, idVendor=045e, idProduct=0084 [ 7.102108] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.102110] usb 2-2: Product: Basic Optical Mouse [ 7.102113] usb 2-2: Manufacturer: Microsoft [ 7.115183] usbcore: registered new interface driver usbhid [ 7.115187] usbhid: USB HID core driver [ 7.119088] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3 [ 7.119213] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:13.0-2/input0 [ 7.176339] usb 1-3.4: new high-speed USB device number 5 using ehci-pci [ 7.208079] xor: automatically using best checksumming function: [ 7.214770] sda: sda1 sda2 sda3 [ 7.215164] sd 2:0:0:0: [sda] Attached SCSI disk [ 7.248012] generic_sse: 7479.000 MB/sec [ 7.250460] device-mapper: dm-raid45: initialized v0.2594b [ 7.269477] usb 1-3.4: New USB device found, idVendor=05e3, idProduct=0608 [ 7.269483] usb 1-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.269486] usb 1-3.4: Product: USB2.0 Hub [ 7.270090] hub 1-3.4:1.0: USB hub found [ 7.270354] hub 1-3.4:1.0: 4 ports detected [ 7.544271] usb 1-3.4.1: new high-speed USB device number 6 using ehci-pci [ 7.636771] usb 1-3.4.1: New USB device found, idVendor=04b8, idProduct=012c [ 7.636776] usb 1-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.636779] usb 1-3.4.1: Product: EPSON Scanner [ 7.636781] usb 1-3.4.1: Manufacturer: EPSON [ 7.708278] usb 1-3.4.4: new full-speed USB device number 7 using ehci-pci [ 7.801415] usb 1-3.4.4: New USB device found, idVendor=067b, idProduct=2303 [ 7.801417] usb 1-3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.801420] usb 1-3.4.4: Product: USB-Serial Controller [ 7.801422] usb 1-3.4.4: Manufacturer: Prolific Technology Inc. [ 7.802953] scsi 6:0:0:0: Direct-Access Seagate USB 3.0 Cable 0210 PQ: 0 ANSI: 0 [ 7.803718] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 7.804458] sd 6:0:0:0: [sdb] 976773167 512-byte logical blocks: (500 GB/465 GiB) [ 7.805706] sd 6:0:0:0: [sdb] Write Protect is off [ 7.805713] sd 6:0:0:0: [sdb] Mode Sense: 0f 00 00 00 [ 7.806680] sd 6:0:0:0: [sdb] No Caching mode page present [ 7.806683] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.809424] sd 6:0:0:0: [sdb] No Caching mode page present [ 7.809428] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.842069] sdb: sdb4 [ 7.842069] sdb4: <bsd: > [ 7.847308] sd 6:0:0:0: [sdb] No Caching mode page present [ 7.847313] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 7.847317] sd 6:0:0:0: [sdb] Attached SCSI disk [ 108.996841] r8169 0000:02:0f.0 eth0: link down [ 108.996869] r8169 0000:02:0f.0 eth0: link down [ 108.996917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 111.991866] r8169 0000:02:0f.0 eth0: link up [ 111.991875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 187.945193] FS-Cache: Loaded [ 187.948824] FS-Cache: Netfs 'cifs' registered for caching [ 187.948954] Key type cifs.spnego registered [ 187.948968] Key type cifs.idmap registered [ 192.223791] CIFS: the value of the unc= mount option does not match the device string. Using the unc= option for now. In 3.10, that option will be ignored and the contents of the device string will be used instead. ((null) != \\203.2.73.1\data) [ 192.887353] CIFS VFS: could not allocate crypto API arc4 [ 192.925341] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 192.925352] CIFS VFS: Send error in SessSetup = -13 [ 192.925459] CIFS VFS: cifs_mount failed w/return code = -13 [ 231.174722] CIFS: the value of the unc= mount option does not match the device string. Using the unc= option for now. In 3.10, that option will be ignored and the contents of the device string will be used instead. ((null) != \\203.2.73.1\data) [ 231.191450] CIFS VFS: could not allocate crypto API arc4 [ 231.193123] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 231.193136] CIFS VFS: Send error in SessSetup = -13 [ 231.193225] CIFS VFS: cifs_mount failed w/return code = -13 [ 260.240098] CIFS VFS: CIFS mount error: No usable UNC path provided in device string or in unc= option! [ 262.875877] CIFS: the value of the unc= mount option does not match the device string. Using the unc= option for now. In 3.10, that option will be ignored and the contents of the device string will be used instead. ((null) != \\203.2.73.1\data) [ 262.891947] CIFS VFS: could not allocate crypto API arc4
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52CD1E41.5010607>