Date: Mon, 29 Jul 2013 10:21:18 -0400 From: Anthony Jenkins <Scoobi_doo@yahoo.com> To: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Atheros AR9565 detected, not working Message-ID: <51F67A5E.1010603@yahoo.com>
next in thread | raw e-mail | index | archive | help
I just got an HP ENVY Sleekbook 6z-1100 laptop hoping it came with a
FreeBSD-supported wireless NIC. It has an Atheros AR9565 and looking at
the logs it _seems_ like it should be working, but I get no network
traffic. I haven't started the Atheros debugging procedure yet, save to
compile in option AH_DEBUG and move ath(4) out of the kernel & to a
module to facilitate changes. Works (of course) in Win8 which came with
laptop. Wireless enabled LED is amber (disabled) in FreeBSD, goes from
amber to white (enabled) when I boot the Win8 HDD.
Here's various logs and misc. system info. What should I try next?
Thanks in advance!
[root@laptop /usr/src]# uname -a n
FreeBSD laptop.qtchat.org 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Sat Jul
27 23:45:30 EDT 2013
root@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL amd64
[root@laptop /usr/src]# dmesg
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0: Sat Jul 27 23:45:30 EDT 2013
root@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
module_register: module pci/xhci already exists!
Module pci/xhci failed to register: 17
CPU: AMD A10-4655M APU with Radeon(tm) HD Graphics (1996.31-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x610f01 Family = 0x15 Model = 0x10
Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x1abbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,<b17>,NodeId,TBM,<b23>,<b24>>
Standard Extended Features=0x8<BMI1>
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 15463530496 (14747 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HPQOEM 18DE >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 16
cpu1 (AP): APIC ID: 17
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 19
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 iomem
0xff000000-0xff000fff on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
0xe0000000-0xefffffff,0xf0300000-0xf033ffff irq 17 at device 1.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
hdac0: <ATI (0x9902) HDA Controller> mem 0xf0344000-0xf0347fff irq 18 at
device 1.1 on pci0
hdac0: hdac_get_capabilities: Invalid corb size (0); assuming 256.
hdac0: hdac_get_capabilities: Invalid rirb size (0); assuming 256.
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> at device 0.0 (no driver attached)
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at
device 0.2 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x48800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 6c:3b:e5:81:21:f0
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Qualcomm Atheros AR9565> mem 0xf0100000-0xf017ffff irq 17 at
device 0.0 on pci2
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ar9300_fill_capability_info: (MCI) MCI support = 1
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9565 mac 704.0 RF5110 phy 526.12
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf0348000-0xf0349fff irq
18 at device 16.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
ahci0: <AMD Hudson-2 AHCI SATA controller> port
0x3118-0x311f,0x3124-0x3127,0x3110-0x3117,0x3120-0x3123,0x3100-0x310f
mem 0xf034e000-0xf034e7ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xf034d000-0xf034dfff irq 18
at device 18.0 on pci0
usbus1 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf034c000-0xf034c0ff irq
17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xf034b000-0xf034bfff irq 18
at device 19.0 on pci0
usbus3 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf034a000-0xf034a0ff irq
17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xf0340000-0xf0343fff
irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (226.8C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1
hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1
pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12 on hdaa1
pcm2: <IDT 92HD91BXX (Analog Mic)> at nid 17 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <AMD> at usbus3
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <AMD> at usbus2
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <AMD> at usbus1
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022> at usbus0
uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen4.1: <AMD> at usbus4
uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 Series DXT06B0Q> ATA-9 SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1996309068 Hz quality 1000
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00)
[SystemCMOS] (20130626/evregion-178)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20130626/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.LPC0.EC0_._Q42]
(Node 0xfffffe0026ae8340), AE_NOT_EXIST (20130626/psparse-553)
acpi_ec0: evaluation of query method _Q42 failed: AE_NOT_EXIST
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus4 usbus2
uhub1: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
Root mount waiting for: usbus4 usbus2
ugen2.2: <Ralink> at usbus2
ugen4.2: <SuYin> at usbus4
Trying to mount root from zfs:sys []...
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
ugen3.2: <vendor 0x0cf3> at usbus3
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetCTSTimeout: called
ar9300_Stub_GetAntennaSwitch: called
ar9300_Stub_GetAntennaSwitch: called
wlan1: Ethernet address: 20:68:9d:c5:76:8d
run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
1c:bd:b9:8c:9d:71
ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2>
on usbus3
wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
run0: firmware RT3071 ver. 0.236 loaded
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
WARNING pid 2654 (python2.7): ioctl sign-extension ioctl ffffffff80087467
WARNING pid 2655 (python2.7): ioctl sign-extension ioctl ffffffff80087467
WARNING pid 2656 (python2.7): ioctl sign-extension ioctl ffffffff80087467
wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
run0: firmware RT3071 ver. 0.236 loaded
wlan0: link state changed to UP
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
uhub3: at usbus0, port 1, addr 1 (disconnected)
uhub2: at usbus1, port 1, addr 1 (disconnected)
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
uhub1: at usbus2, port 1, addr 1 (disconnected)
ugen2.2: <Ralink> at usbus2 (disconnected)
run0: at uhub1, port 1, addr 2 (disconnected)
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
wlan0: link state changed to DOWN
uhub0: at usbus3, port 1, addr 1 (disconnected)
ugen3.2: <vendor 0x0cf3> at usbus3 (disconnected)
ubt0: at uhub0, port 4, addr 2 (disconnected)
xhci_interrupt: host controller halted
xhci_interrupt: host controller halted
uhub4: at usbus4, port 1, addr 1 (disconnected)
ugen4.2: <SuYin> at usbus4 (disconnected)
ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00)
[SystemCMOS] (20130626/evregion-178)
ACPI Error: Region SystemCMOS (ID=5) has no handler (20130626/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
ACPI Error: Method parse/execution failed [\134_PTS] (Node
0xfffffe0026ab4c80), AE_NOT_EXIST (20130626/psparse-553)
acpi0: AcpiEnterSleepStatePrep failed - AE_NOT_EXIST
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
xhci0: 32 byte context size.
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 4 ports with 4 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen2.2: <Ralink> at usbus2
run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
ugen4.2: <SuYin> at usbus4
run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
1c:bd:b9:8c:9d:71
wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
run0: firmware RT3071 ver. 0.236 loaded
ugen3.2: <vendor 0x0cf3> at usbus3
ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2>
on usbus3
wlan0: link state changed to UP
can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
[root@laptop /usr/src]# cat /etc/rc.conf
wlans_run0="wlan0"
wlans_ath0="wlan1"
ifconfig_wlan0="DHCP WPA"
...
[root@laptop /usr/src]# ifconfig -a
ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 20:68:9d:c5:76:8d
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
wlan1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 20:68:9d:c5:76:8d
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 1 (2412 MHz 11b)
regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7
scanvalid 60 wme burst bintval 0
...
[root@laptop /usr/src]# /etc/rc.d/netif start ath0
Starting Network: ath0.
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 20:68:9d:c5:76:8d
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
Additional inet routing options: ignore ICMP redirect=YES log ICMP
redirect=YES.
[root@laptop /usr/src]# for iface in ath0 wlan1; do ifconfig ${iface}; done
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 20:68:9d:c5:76:8d
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 20:68:9d:c5:76:8d
inet 67.215.65.145 netmask 0xff000000 broadcast 67.215.65.145
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 2 (2417 MHz 11g)
regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7
scanvalid 60 protmode CTS wme burst
[root@laptop /usr/src]# dmesg
...
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
--
Anthony Jenkins
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51F67A5E.1010603>