Date: Fri, 10 Jan 2020 11:58:31 +0100 From: Miroslav Lachman <000.fbsd@quip.cz> To: Stefan Parvu <sparvu@kronometrix.org>, freebsd-xen@freebsd.org Subject: Re: bridge0 settings for VMs Message-ID: <0d0c17b1-4da1-ba98-fe7c-09184166fe15@quip.cz> In-Reply-To: <6470B729-33DA-430B-9286-A645EEE4BE2D@kronometrix.org> References: <6470B729-33DA-430B-9286-A645EEE4BE2D@kronometrix.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Stefan Parvu wrote on 2020/01/10 10:31: > Hi, > > Under the documentation [1] there are pointers about how one would define an interface for all domUs. > Now the documentation says: > > # sysrc cloned_interfaces="bridge0" > # sysrc ifconfig_bridge0="addm em0 SYNCDHCP" > # sysrc ifconfig_em0=“up” > > where em0 is the main interface. > > Now I have server which has a functional em1 interface running and configured. I want to define a bridge0 interface for all domains, but not to use DHCP, because I dont have a DHCP server on that network. > > Any ideas how shall I configure the bridge0 interface using ifconfig_bridge0=“..." Just remove SYNCDHCP For example: cloned_interfaces="bridge0 tap0" ifconfig_bridge0="addm bge0 up addm tap0 up" It will create bridge0 with bge0 and tap0 as a members. bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 02:71:2c:00:ca:00 nd6 options=9<PERFORMNUD,IFDISABLED> groups: bridge id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 5 priority 128 path cost 2000000 member: bge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 1 priority 128 path cost 55 Kind regards Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0d0c17b1-4da1-ba98-fe7c-09184166fe15>