Date: Tue, 27 Mar 2018 15:35:01 +0200 From: Wouter Snels <ofloo@h4ck.io> To: freebsd-virtualization@freebsd.org, "Rodney W. Grimes" <freebsd-rwg@pdx.rh.CN85.dnsmgr.net> Subject: Re: bhyve pci passthrough usb controller Message-ID: <26fdde13-f297-a0b7-e696-00a87c7a56eb@h4ck.io> In-Reply-To: <bfda0fa1-48be-4bc5-9172-8de89e4196fc@ofloo.net> References: <201803240230.w2O2U21F033917@pdx.rh.CN85.dnsmgr.net> <bfda0fa1-48be-4bc5-9172-8de89e4196fc@ofloo.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I tried what you've suggested and it makes no difference. Even if pci device 0/20/2 is passed through it still gives these errors. Regards, .. Op 24-03-18 om 07:47 schreef Wouter Snels: > I surely will try this out, but what about device 4/0/0 showing the same issue. Both tests where performed separately showing the exact same result, of course I'd be happy if either one of them worked. > > Regards,.. > > > -------- Oorspronkelijk bericht -------- > Van: "Rodney W. Grimes" <freebsd-rwg@pdx.rh.CN85.dnsmgr.net> > Verzonden: Sat Mar 24 03:30:02 GMT+01:00 2018 > Aan: Wouter Snels <nospam@ofloo.net> > Cc: Julian Elischer <julian@freebsd.org>, freebsd-virtualization@freebsd.org > Onderwerp: Re: bhyve pci passthrough usb controller > > -- Start of PGP signed section. >> Hi, .. >> >> I'm trying to pci passhthrough a usb controller to a bhyve windows 7 >> virtualization. >> When I start the virtual machine it freezes the entire system. See >> console.log >> To be clear the system runs without any problems without the pci >> passthrough. >> >> kernel configuration >> >> include GENERIC >> ident?? OFL >> options IPFIREWALL >> options IPFIREWALL_VERBOSE >> options IPFIREWALL_DEFAULT_TO_ACCEPT >> options DUMMYNET >> options IPDIVERT >> options CONSPEED=115200 >> >> * note: removed xhci driver from GENERIC >> >> >> I've recompiled the kernel without the xhci driver. I've tested both usb >> controllers. >> Both "Sunrise Point-H USB 3.0 xHCI Controller" and "uPD720202 USB 3.0 >> Host Controller", both showed >> the same error on the console screen. >> >> # uname >> FreeBSD 11.1-STABLE #1 r331092M >> >> # custom kernel >> include GENERIC >> ident?? OFL >> options IPFIREWALL >> options IPFIREWALL_VERBOSE >> options IPFIREWALL_DEFAULT_TO_ACCEPT >> options DUMMYNET >> options IPDIVERT >> options CONSPEED=115200 >> >> * note commented "device xhci" in generic >> >> # svn info >> Path: . >> Working Copy Root Path: /usr/src >> URL: https://svn0.eu.freebsd.org/base/stable/11 >> Relative URL: ^/stable/11 >> Repository Root: https://svn0.eu.freebsd.org/base >> Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f >> Revision: 331092 >> Node Kind: directory >> Schedule: normal >> Last Changed Author: eadler >> Last Changed Rev: 331092 >> Last Changed Date: 2018-03-17 07:44:39 +0100 (Sat, 17 Mar 2018) >> >> # vm passthru >> DEVICE???? BHYVE ID???? READY??????? DESCRIPTION >> hostb0???? 0/0/0??????? No?????????? Xeon E3-1200 v5/E3-1500 v5/6th Gen >> Core Processor Host Bridge/DRAM Registers >> pcib1????? 0/1/0??????? No?????????? Xeon E3-1200 v5/E3-1500 v5/6th Gen >> Core Processor PCIe Controller (x16) >> vgapci0??? 0/2/0??????? No?????????? HD Graphics 530 >> ppt0?????? 0/20/0?????? Yes????????? Sunrise Point-H USB 3.0 xHCI Controller > 0/20/0 > >> none0????? 0/20/2?????? No?????????? Sunrise Point-H Thermal subsystem > has a subdevice 0/20/2 that is not being passed, this may cause odd > things to happen. > >> none1????? 0/22/0?????? No?????????? Sunrise Point-H CSME HECI >> ahci0????? 0/23/0?????? No?????????? Sunrise Point-H SATA controller >> [AHCI mode] >> pcib2????? 0/28/0?????? No?????????? Sunrise Point-H PCI Express Root Port >> pcib4????? 0/28/6?????? No?????????? Sunrise Point-H PCI Express Root Port >> isab0????? 0/31/0?????? No?????????? Sunrise Point-H LPC Controller >> none2????? 0/31/2?????? No?????????? Sunrise Point-H PMC >> hdac0????? 0/31/3?????? No?????????? Sunrise Point-H HD Audio >> none3????? 0/31/4?????? No?????????? Sunrise Point-H SMBus >> em0??????? 0/31/6?????? No?????????? Ethernet Connection (2) I219-V >> pcib3????? 2/0/0??????? No?????????? XIO2001 PCI Express-to-PCI Bridge >> xl0??????? 3/0/0??????? No?????????? 3c905B 100BaseTX [Cyclone] >> ppt1?????? 4/0/0??????? Yes????????? uPD720202 USB 3.0 Host Controller >> >> ppt1@pci0:4:0:0:??? class=0x0c0330 card=0x00151912 chip=0x00151912 >> rev=0x02 hdr=0x00 >> ??? vendor???? = 'Renesas Technology Corp.'/mailman >> ??? device???? = 'uPD720202 USB 3.0 Host Controller' >> ??? class????? = serial bus >> ??? subclass?? = USB >> >> ppt0@pci0:0:20:0:????? class=0x0c0330 card=0x06ba1028 chip=0xa12f8086 >> rev=0x31 hdr=0x00 >> ??? vendor???? = 'Intel Corporation' >> ??? device???? = 'Sunrise Point-H USB 3.0 xHCI Controller' >> ??? class????? = serial bus >> ??? subclass?? = USB >> >> # grep -i pptdevfs loader.conf >> pptdevs="0/20/0 4/0/0" > add 0/20/2 to this > >> # vm configure >> passthru0="0/20/0" >> >> # vm configure >> passthru0="4/0/0" >> >> Any suggestions on what I'm doing wrong? >> >> >> * Sorry kinda new to this mailing list thing >> >> >> Op 23-03-18 om 18:25 schreef Julian Elischer: >>> On 23/3/18 11:40 pm, Wouter Snels wrote: >>> >>> >>> new wrapping is no better >>> It looks like the device you are passing though is not removed from >>> freebsd first. >>> but it's hard to tell. >>> >>>> |Hi, .. I'm trying to pci passhthrough a usb controller to a bhyve >>>> windows 7 virtualization. When I start the virtual machine it freezes >>>> the entire system and this shows up on the console. To be clear the >>>> system runs without any problems without the pci passthrough. | >>>> ||(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 e0 ff 40 40 29 00 >>>> 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was invalid >>>> (ada0:ahcich0:0:0:0): Error 22, Unretryable error >>>> (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 >>>> 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was invalid >>>> (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ada0 at ahcich0 bus >>>> 0 scbus0 target 0 lun 0 ada0: <ST500DM002-1SB10A CC43> s/n ZA4292G6 >>>> detached (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 >>>> 00 00 00 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was >>>> invalid (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: >>>> Poll timeout on slot 28 port 0 ahcich0: is 20000000 cs 10000000 ss >>>> 00000000 rs 10000000 tfd 1d0 serr 00000800 cmd 00005c17 >>>> (aprobe0:ahcich0:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 >>>> 00 00 (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >>>> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >>>> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 >>>> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >>>> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: Poll >>>> timeout on slot 30 port 0 ahcich0: is 20000000 cs 40000000 ss 00000000 >>>> rs 40000000 tfd 1d0 serr 00000800 cmd 00005e17 (aprobe0:ahcich0:0:0:0): >>>> SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 >>>> (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >>>> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >>>> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE WCACHE. ACB: ef 02 00 00 00 40 >>>> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >>>> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error >>>> (ada0:ahcich0:0:0:0): Periph destroyed em0: Watchdog timeout Queue[0]-- >>>> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >>>> tdh = 428, hw tdt = 471 em0: Tx Queue Status = -2147483648 em0: TX >>>> descriptors avail = 981 em0: Tx Descriptors avail failure = 0 em0: RX >>>> Queue 0 ------ em0: hw rdh = 912, hw rdt = 908 em0: RX discarded packets >>>> = 0 em0: RX Next to Check = 909 em0: RX Next to Refresh = 908 xl0: >>>> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >>>> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 58 >>>> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 966 em0: >>>> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >>>> hw rdt = 1023 em0: RX discarded packets = 0 em0: RX Next to Check = 0 >>>> em0: RX Next to Refresh = 1023 em0: Watchdog timeout Queue[0]-- >>>> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >>>> tdh = 0, hw tdt = 58 em0: Tx Queue Status = -2147483648 em0: TX >>>> descriptors avail = 966 em0: Tx Descriptors avail failure = 0 em0: RX >>>> Queue 0 ------ em0: hw rdh = 0, hw rdt = 1023 em0: RX discarded packets >>>> = 0 em0: RX Next to Check = 0 em0: RX Next to Refresh = 1023 xl0: >>>> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >>>> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 54 >>>> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 970 em0: >>>> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >>>> hw rdt = 1023 em0: RX discarded packets = 0include GENERIC ident OFL >>>> options IPFIREWALL|||||| >>>> >>>> |Hi, .. I'm trying to pci passhthrough a usb controller to a bhyve >>>> windows 7 virtualization. When I start the virtual machine it freezes >>>> the entire system and this shows up on the console. To be clear the >>>> system runs without any problems without the pci passthrough. | >>>> ||(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 e0 ff 40 40 29 00 >>>> 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was invalid >>>> (ada0:ahcich0:0:0:0): Error 22, Unretryable error >>>> (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 >>>> 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was invalid >>>> (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ada0 at ahcich0 bus >>>> 0 scbus0 target 0 lun 0 ada0: <ST500DM002-1SB10A CC43> s/n ZA4292G6 >>>> detached (aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 >>>> 00 00 00 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: CCB request was >>>> invalid (aprobe0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: >>>> Poll timeout on slot 28 port 0 ahcich0: is 20000000 cs 10000000 ss >>>> 00000000 rs 10000000 tfd 1d0 serr 00000800 cmd 00005c17 >>>> (aprobe0:ahcich0:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 >>>> 00 00 (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >>>> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >>>> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE RCACHE. ACB: ef aa 00 00 00 40 >>>> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >>>> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error ahcich0: Poll >>>> timeout on slot 30 port 0 ahcich0: is 20000000 cs 40000000 ss 00000000 >>>> rs 40000000 tfd 1d0 serr 00000800 cmd 00005e17 (aprobe0:ahcich0:0:0:0): >>>> SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 >>>> (aprobe0:ahcich0:0:0:0): CAM status: Command timeout >>>> (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >>>> (ada0:ahcich0:0:0:0): SETFEATURES ENABLE WCACHE. ACB: ef 02 00 00 00 40 >>>> 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: CCB request was >>>> invalid (ada0:ahcich0:0:0:0): Error 22, Unretryable error >>>> (ada0:ahcich0:0:0:0): Periph destroyed em0: Watchdog timeout Queue[0]-- >>>> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >>>> tdh = 428, hw tdt = 471 em0: Tx Queue Status = -2147483648 em0: TX >>>> descriptors avail = 981 em0: Tx Descriptors avail failure = 0 em0: RX >>>> Queue 0 ------ em0: hw rdh = 912, hw rdt = 908 em0: RX discarded packets >>>> = 0 em0: RX Next to Check = 909 em0: RX Next to Refresh = 908 xl0: >>>> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >>>> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 58 >>>> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 966 em0: >>>> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >>>> hw rdt = 1023 em0: RX discarded packets = 0 em0: RX Next to Check = 0 >>>> em0: RX Next to Refresh = 1023 em0: Watchdog timeout Queue[0]-- >>>> resetting Interface is RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw >>>> tdh = 0, hw tdt = 58 em0: Tx Queue Status = -2147483648 em0: TX >>>> descriptors avail = 966 em0: Tx Descriptors avail failure = 0 em0: RX >>>> Queue 0 ------ em0: hw rdh = 0, hw rdt = 1023 em0: RX discarded packets >>>> = 0 em0: RX Next to Check = 0 em0: RX Next to Refresh = 1023 xl0: >>>> watchdog timeout em0: Watchdog timeout Queue[0]-- resetting Interface is >>>> RUNNING and ACTIVE em0: TX Queue 0 ------ em0: hw tdh = 0, hw tdt = 54 >>>> em0: Tx Queue Status = -2147483648 em0: TX descriptors avail = 970 em0: >>>> Tx Descriptors avail failure = 0 em0: RX Queue 0 ------ em0: hw rdh = 0, >>>> hw rdt = 1023 em0: RX discarded packets = 0include GENERIC ident OFL >>>> options IPFIREWALL options IPFIREWALL_VERBOSE options >>>> IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options >>>> CONSPEED=115200 em0: RX Next to Check = 0 em0: RX Next to Refresh = >>>> 1023 |||| >>>> |||I've recompiled the kernel without the xhci driver. I've tested both >>>> usb controllers. Both "|||||Sunrise Point-H USB 3.0 xHCI >>>> Controller|"||||| and "|||uPD720202 USB 3.0 Host Controller|", both >>>> showed the same error on the console screen.| # uname FreeBSD >>>> 11.1-STABLE #1 r331092M # custom kernel include GENERIC ident OFL >>>> options IPFIREWALL options IPFIREWALL_VERBOSE options >>>> IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options >>>> CONSPEED=115200 * note commented "device xhci" in generic # svn info >>>> |||Path: . Working Copy Root Path: /usr/src URL: >>>> https://svn0.eu.freebsd.org/base/stable/11 Relative URL: ^/stable/11 >>>> Repository Root: https://svn0.eu.freebsd.org/base Repository UUID: >>>> ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 331092 Node Kind: >>>> directory Schedule: normal Last Changed Author: eadler Last Changed Rev: >>>> 331092 Last Changed Date: 2018-03-17 07:44:39 +0100 (Sat, 17 Mar 2018) >>>> |# vm passthru DEVICE BHYVE ID READY DESCRIPTION hostb0 0/0/0 No Xeon >>>> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers >>>> pcib1 0/1/0 No Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe >>>> Controller (x16) vgapci0 0/2/0 No HD Graphics 530 |||ppt0| 0/20/0 Yes >>>> Sunrise Point-H USB 3.0 xHCI Controller none0 0/20/2 >>>> No Sunrise Point-H Thermal subsystem none1 0/22/0 No Sunrise Point-H >>>> CSME HECI ahci0 0/23/0 No Sunrise Point-H SATA controller [AHCI mode] >>>> pcib2 0/28/0 No Sunrise Point-H PCI Express Root Port pcib4 0/28/6 No >>>> Sunrise Point-H PCI Express Root Port isab0 0/31/0 No Sunrise Point-H >>>> LPC Controller none2 0/31/2 No Sunrise Point-H PMC hdac0 0/31/3 No >>>> Sunrise Point-H HD Audio none3 0/31/4 No Sunrise Point-H SMBus em0 >>>> 0/31/6 No Ethernet Connection (2) I219-V pcib3 2/0/0 No XIO2001 PCI >>>> Express-to-PCI Bridge xl0 3/0/0 No 3c905B 100BaseTX [Cyclone] ppt1 4/0/0 >>>> Yes uPD720202 USB 3.0 Host Controller ||ppt1@pci0:4:0:0: >>>> class=0x0c0330 card=0x00151912 chip=0x00151912 rev=0x02 >>>> hdr=0x00 vendor = 'Renesas Technology Corp.' device = 'uPD720202 USB 3.0 >>>> Host Controller' class = serial bus subclass = USB >>>> |||ppt|0@pci0:0:20:0: class=0x0c0330 card=0x06ba1028 chip=0xa12f8086 >>>> rev=0x31 hdr=0x00 vendor = 'Intel Corporation' device = 'Sunrise Point-H >>>> USB 3.0 xHCI Controller' class = serial bus subclass = USB # grep -i >>>> pptdevfs loader.conf ||pptdevs="0/20/0 4/0/0" # vm configure >>>> ||passthru0="0/20/0"| >>>> >>>> |# vm configure ||passthru0="4/0/0"| >>>> ||Any suggestions on what I'm doing wrong?|| >>>> ? Regards, Ofloo >>>> |||||| >>>> >>>> ||options IPFIREWALL_VERBOSE options IPFIREWALL_DEFAULT_TO_ACCEPT >>>> options >>>> DUMMYNET options IPDIVERT options CONSPEED=115200 em0: RX Next to Check >>>> = 0 em0: RX Next to Refresh = 1023 |||| >>>> |||I've recompiled the kernel without the xhci driver. I've tested both >>>> usb controllers. Both "|||||Sunrise Point-H USB 3.0 xHCI >>>> Controller|"||||| and "|||uPD720202 USB 3.0 Host Controller|", both >>>> showed the same error on the console screen.| # uname FreeBSD >>>> 11.1-STABLE #1 r331092M # custom kernel include GENERIC ident OFL >>>> options IPFIREWALL options IPFIREWALL_VERBOSE options >>>> IPFIREWALL_DEFAULT_TO_ACCEPT options DUMMYNET options IPDIVERT options >>>> CONSPEED=115200 * note commented "device xhci" in generic # svn info >>>> |||Path: . Working Copy Root Path: /usr/src URL: >>>> https://svn0.eu.freebsd.org/base/stable/11 Relative URL: ^/stable/11 >>>> Repository Root: https://svn0.eu.freebsd.org/base Repository UUID: >>>> ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 331092 Node Kind: >>>> directory Schedule: normal Last Changed Author: eadler Last Changed Rev: >>>> 331092 Last Changed Date: 2018-03-17 07:44:39 +0100 (Sat, 17 Mar 2018) >>>> |# vm passthru DEVICE BHYVE ID READY DESCRIPTION hostb0 0/0/0 No Xeon >>>> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers >>>> pcib1 0/1/0 No Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe >>>> Controller (x16) vgapci0 0/2/0 No HD Graphics 530 |||ppt0| 0/20/0 Yes >>>> Sunrise Point-H USB 3.0 xHCI Controller none0 0/20/2 >>>> No Sunrise Point-H Thermal subsystem none1 0/22/0 No Sunrise Point-H >>>> CSME HECI ahci0 0/23/0 No Sunrise Point-H SATA controller [AHCI mode] >>>> pcib2 0/28/0 No Sunrise Point-H PCI Express Root Port pcib4 0/28/6 No >>>> Sunrise Point-H PCI Express Root Port isab0 0/31/0 No Sunrise Point-H >>>> LPC Controller none2 0/31/2 No Sunrise Point-H PMC hdac0 0/31/3 No >>>> Sunrise Point-H HD Audio none3 0/31/4 No Sunrise Point-H SMBus em0 >>>> 0/31/6 No Ethernet Connection (2) I219-V pcib3 2/0/0 No XIO2001 PCI >>>> Express-to-PCI Bridge xl0 3/0/0 No 3c905B 100BaseTX [Cyclone] ppt1 4/0/0 >>>> Yes uPD720202 USB 3.0 Host Controller ||ppt1@pci0:4:0:0: >>>> class=0x0c0330 card=0x00151912 chip=0x00151912 rev=0x02 >>>> hdr=0x00 vendor = 'Renesas Technology Corp.' device = 'uPD720202 USB 3.0 >>>> Host Controller' class = serial bus subclass = USB >>>> |||ppt|0@pci0:0:20:0: class=0x0c0330 card=0x06ba1028 chip=0xa12f8086 >>>> rev=0x31 hdr=0x00 vendor = 'Intel Corporation' device = 'Sunrise Point-H >>>> USB 3.0 xHCI Controller' class = serial bus subclass = USB # grep -i >>>> pptdevfs loader.conf ||pptdevs="0/20/0 4/0/0" # vm configure >>>> ||passthru0="0/20/0"| >>>> >>>> |# vm configure ||passthru0="4/0/0"| >>>> ||Any suggestions on what I'm doing wrong?|| >>>> >>>> edit: previous wrapping was all wrong. >>>> ?? Regards, Ofloo >>>> |||||| >>>> >>>> > -- End of PGP section, PGP failed! >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?26fdde13-f297-a0b7-e696-00a87c7a56eb>