Date: Thu, 26 Sep 2002 21:46:21 -0700 From: Corey Holcomb-Hockin <crsntlvs@ipeg.com> To: freebsd-multimedia@freebsd.org Subject: Fxtv crash Message-ID: <3D93E29D.9080702@ipeg.com>
next in thread | raw e-mail | index | archive | help
Asus a7a-133
Athlon XP 1900+
Matrox G400
Hauppauge WinTV radio
Ensoniq audiopci
FreeBSD 4.6.2
XFree86 4.2.0
Fxtv 1.03
I just bought a Hauppague WinTV radio and was trying to get it running on
FreeBSD. I got vidio and sound working when I use -disableDirectV. If I
don't use that setting I get video for a several seconds then the computer
freezes up completely. The video that i get has some blocky distortion
also.
I had a similar problem when using 3d on linux. It would work for a
random number of seconds then freeze up the computer. I assume both of
these
problems have to do with memory corruption.
Is there any way to fix this problem or should I just stick to
-disableDirectV? I'm not sure if this is because I configured something
incorrectly or if its a hardware problem.
I'm going to post my XF86Config, dmesg, kernel configuration, and fxtv
-debug
startup.
thanks,
Corey Holcomb-Hockin
---XF86Config
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "xie"
Load "pex5"
Load "glx"
# Load "dri"
Load "dbe"
Load "record"
Load "extmod"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "MouseSystems"
Option "Device" "/dev/sysmouse"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 82.0
VertRefresh 40.0 - 150.0
EndSection
Section "Device"
Identifier "Card0"
Driver "mga"
ChipSet "mgag400"
Card "Matrox MGA G200 PCI (mgag400)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
# Modes "640x480"
EndSubSection
EndSection
----dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #3: Thu Sep 26 17:03:33 PDT 2002
corey@rlfc:/usr/src/sys/compile/PAVKERNAL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1611824949 Hz
CPU: AMD Athlon(TM) XP1900+ (1611.82-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 536788992 (524208K bytes)
avail memory = 519356416 (507184K bytes)
Preloaded elf kernel "kernel" at 0xc033d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f1770
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xf9000000-0xf9000fff irq
5 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
atapci0: <AcerLabs Aladdin ATA100 controller> port 0xd400-0xd40f at
device 4.0 o
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
bktr0: <BrookTree 878> mem 0xfb000000-0xfb000fff irq 10 at device 11.0
on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicsmb1: <I2C to SMB bridge> on iicbus1
smbus1: <System Management Bus> on iicsmb1
smbus2: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 61381 D423
bktr0: Detected a MSP3430G-B6 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c
stereo, remo
te control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 10
pcm0: <Creative CT5880-C> port 0xb800-0xb83f irq 7 at device 13.0 on pci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 38166MB <WDC WD400BB-00CCB0> [77545/16/63] at ata0-master UDMA100
acd0: CDROM <ASUS CD-S520/A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
----kernel
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.34 2001/08/12 13:13:46
joerg Exp
$
machine i386
cpu I686_CPU
ident PAVKERNAL
maxusers 64
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS
required
#options MSDOSFS #MSDOS Filesystem
#options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
#device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
#options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices
when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt
console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
#device ppc0 at isa? irq 7
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit
Ethernet Card (
``Wiseman'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS
7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# For PnP/PCI sound cards
device pcm
# WinTV
device bktr0
device smbus
device iicbb
device iicbus
device iicsmb
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
pseudo-device tun 1 # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device uscanner # Scanners
#device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
----Fxtv debug startup
Fxtv v1.03
DETECTED CAPTURE CARD(S) [DRIVER PROBES]:
bktr0: <BrookTree 878> mem 0xfb000000-0xfb000fff irq 10 at device
11.0 on pc
i0
iicbb0: <I2C bit-banging driver> on bti2c0
bktr0: Hauppauge Model 61381 D423
bktr0: Detected a MSP3430G-B6 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c
stereo,
remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 10
SYSCTL MIB VALUES:
kern.version: FreeBSD 4.6.2-RELEASE #3: Thu Sep 26 17:03:33 PDT 2002
corey@rlfc:/usr/src/sys/compile/PAVKERNAL
hw.bt848.card: -1
hw.bt848.tuner: -1
hw.bt848.reverse_mute: -1
hw.bt848.format: -1
hw.bt848.slow_msp_audio: -1
TUNER SIGNATURE (0x01 - 0xff):
00 00 00 01 00 00 00 00 01 00 01 00 02 00 00 00
TUNER I2C DEVICES FOUND AT:
0x30, 0x80, 0xa0, 0xc2
CAPTURE CARD EEPROM CONTENTS:
Read 256 EEPROM bytes (0x00 - 0xff)
84 12 00 00 05 50 0e 7f 08 17 23 c5 ef 93 44 91
00 00 00 00 05 84 0a 00 01 01 20 77 00 40 3b 9e
3e 00 74 02 01 07 03 79 ad 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70
84 12 00 00 05 50 0e 7f 08 17 23 c5 ef 93 44 91
00 00 00 00 05 84 0a 00 01 01 20 77 00 40 3b 9e
3e 00 74 02 01 07 03 79 ad 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 13 eb 00 70
SUPPORTED FREQUENCY SETS:
1 nabcst
2 cableirc
3 cablehrc
4 weurope
5 jpnbcst
6 jpncable
7 xussr
8 australia
9 france
Supported RGB Capture Pixel Formats:
bpp Bpp RGB Masks Swap
--- --- ---------------------------- ----
15 2 00007c00, 000003e0, 0000001f NB
16 2 0000f800, 000007e0, 0000001f NB
24 3 00ff0000, 0000ff00, 000000ff B
24 4 00ff0000, 0000ff00, 000000ff NBWb
Supported YUV Capture Pixel Formats:
YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans
------- ----- ----- ------ --------- ---- ---- ------
8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N
8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N
8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N
XSERVER: 'The XFree86 Project, Inc' v40200000, Protocol Verson 11.0
Screen Res = 1024x768, DefDepth = 16; NumScreens = 1
Bitmap Unit/BitOrder/Pad = 32/LSBFirst/32, Image ByteOrder =
LSBFirst
XF86DGAQueryVersion() succeeded - vers = 2.00
BaseAddr = 0xfc000000, Pitch = 1024, BankSize/RamSize = 16777216/16777216
Rating Available Visuals:
Rating Class bpp Bpp R,G,B Masks Swap
DirectVid
------ ----------- --- --- ---------------------------- ----
---------
5 TrueColor 16 2,2 0000f800, 000007e0, 0000001f -- Yes
4 TrueColor 16 2,2 0000f800, 000007e0, 0000001f -- No
0 DirectColor 16 2,2 0000f800, 000007e0, 0000001f -- No
0 DirectColor 16 2,2 0000f800, 000007e0, 0000001f -- No
Chosen Visual is 16-bpp TrueColor
XF86VidModeQueryVersion() succeeded - version = 2.01
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D93E29D.9080702>