Date: Tue, 4 Mar 2003 12:39:42 +0800 From: "David Xu" <davidxu@freebsd.org> To: <current@FreeBSD.ORG> Subject: ATA MODE_SENSE_BIG timeout Message-ID: <003701c2e208$12fde4c0$f001a8c0@davidw2k> References: <200302252028.h1PKStVk048717@spider.deepcore.dk> <3E6419BA.2090703@canofsleep.com>
next in thread | previous in thread | raw e-mail | index | archive | help
For those want to fix ATA code, I have another problem
with CURRENT. I have a Tyan Tiger 230T which is based
on VIA Apollo 133T, south bridge is VIA 686B.
On second IDE, I have a Mitsubishi 52X cdrom as master,
and a Sony 16X CD R/W as slave, when startup, kernel
is always stuck at "MODE_SENSE_BIG timeout".
I fortunately catched the dmesg text since ATA code past the=20
probing stage. In most case, it will be stuck there forever.
BTW, both Linux (2.2.14, Redhat) and MS Windows can probe
these devices in few seconds without any problem.
Here is the dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #4: Fri Feb 28 23:55:50 CST 2003
davidxu@asus.my:/home/davidxu/src/sys/i386/compile/xu2
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04cc000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04cc0a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04cc154.
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (999.67-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10
=
Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory =3D 268369920 (255 MB)
avail memory =3D 255410176 (243 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc047fca2 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdd20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port =
0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on =
acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 5 -> irq 2
IOAPIC #0 intpin 10 -> irq 5
IOAPIC #0 intpin 11 -> irq 10
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem =
0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686b UDMA100 controller> port 0xd000-0xd00f at device =
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 2 at device =
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 2 at device =
7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xe400-0xe41f irq 10 at =
device 11.0 on pci0
ed0: address 52:54:ab:52:53:8f, type NE2000 (16 bit)=20
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port =
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcb7ff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 57241MB <ST360021A> [116301/16/63] at ata0-master UDMA100
acd0: CDROM <ATAPI-CD ROM-DRIVE-52MAX> at ata1-master PIO4
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: read data overrun 34/0
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: read data overrun 34/0
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: read data overrun 34/0
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: read data overrun 34/0
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: read data overrun 34/0
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: read data overrun 34/0
acd1: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices ..
done
acd1: CD-RW <SONY CD-RW CRX140E> at ata1-slave PIO4
SMP: AP CPU #1 Launched!
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):5/1/65 e(CHS):255/254/255 s:63 l:20964762
[1] f:00 typ:5 s(CHS):255/0/193 e(CHS):255/254/255 s:20964825 l:20964825
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:7 s(CHS):255/1/193 e(CHS):255/254/255 s:63 l:20964762
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s3a
--
David Xu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003701c2e208$12fde4c0$f001a8c0>