Date: Thu, 21 Oct 1999 10:20:34 -0700 From: "Peter S. Housel" <housel@acm.org> To: current@FreeBSD.org Subject: ed0 problems for PCI Message-ID: <199910211720.KAA08545@cx281057-a.irvn1.occa.home.com>
next in thread | raw e-mail | index | archive | help
I've been having problems with -current not recognizing my RealTek
8029-based PCI Ethernet card. It worked fine in my previous machine
running -current from July, but neither the late September snapshot
that I installed on the new machine nor the cvsup version from about a
week ago can configure the card. The pciconf and dmesg output are shown below:
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
ide_pci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
chip1@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
chip2@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
none0@pci0:14:0: class=0x040100 card=0x33565053 chip=0x000212eb rev=0xfe hdr=0x00
ed0@pci0:17:0: class=0x020000 card=0x03001186 chip=0x802910ec rev=0x00 hdr=0x00
vga-pci0@pci1:0:0: class=0x030000 card=0x5a001092 chip=0x002810de rev=0x11 hdr=0x00
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #2: Tue Oct 19 21:20:08 PDT 1999
root@cx281057-a.irvn1.occa.home.com:/usr/src/sys/compile/MONDAY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Xeon (598.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 134217728 (131072K bytes)
avail memory = 127332352 (124348K bytes)
Preloaded elf kernel "kernel" at 0xc02bd000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NVidia Riva TNT2 graphics accelerator> irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
chip1: <UHCI USB controller> irq 9 at device 7.2 on pci0
chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
pci0: unknown card (vendor=0x12eb, dev=0x0002) at 14.0 irq 3
ed0: <NE2000 PCI Ethernet (RealTek 8029)> irq 9 at device 17.0 on pci0
device_probe_and_attach: ed0 attach returned 2
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <Maxtor 91360U4>
wd0: 12982MB (26588016 sectors), 26377 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at port 0x170-0x177 irq 15 on isa0
wdc1: unit 0 (atapi): <HITACHI DVD-ROM GD-5000/0212>, removable, accel, dma, iordis
wcd0: drive speed 2412 - 6890KB/sec, 512KB cache
wcd0: supported read types: CD-R, CD-RW, CD-DA, packet track
wcd0: Audio: play, 256 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: CD-ROM 120mm data disc loaded, unlocked
wdc1: unit 1 (atapi): <IOMEGA ZIP 100 ATAPI/14.A>, removable, intr, iordis
wfd0: medium type unknown (no disk)
wfd0: buggy Zip drive, 64-block transfer limit set
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppb0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
changing root device to wd0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910211720.KAA08545>