Date: Thu, 10 Jun 2004 18:15:35 -0700 From: Kachun Lee <kachun@pathlink.com> To: freebsd-stable@freebsd.org Subject: FreeBSD 4.s PAE and TWE Message-ID: <5.0.2.1.2.20040610180638.00b96788@dvl.pathlink.com>
next in thread | raw e-mail | index | archive | help
Hi,
I just increased one of our Intel7501/Xeon servers to 6G RAM and enabled
PAE. However, the TWE driver does not seem to work any more (dmesg below).
Does any one else able to enable PAE with TWE? Any hint in trying to get it
working will be greatly appreciated.
Regards
Kachun
-------------------------------------------------------------------------------------------------------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Thu Jun 10 15:57:37 PDT 2004
root@lisa.pathlink.com:/n/obj/n/bsd.src/4.10/src/sys/LEX
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 3056816752 Hz
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 5368709120 (5242880K bytes)
avail memory = 4953387008 (4837292K bytes)
Preloaded elf kernel "kernel" at 0xb5398000.
Warning: Pentium 4 CPU: PSE disabled
ccd0-23: Concatenated disk drivers
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 19 entries at 0xb50f3460
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2
pci4: <PCI bus> on pcib2
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x3400-0x34ff mem
0xfeae0000-0x
feae0fff irq 11 at device 1.0 on pci4
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x3000-0x30ff mem
0xfeaf0000-0x
feaf0fff irq 11 at device 1.1 on pci4
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
twe0: <3ware Storage Controller driver ver. 1.40.01.001> port 0x3800-0x380f
mem
0xfe000000-0xfe7fffff,0xfea90000-0xfea9000f irq 11 at device 2.0 on pci4
device_probe_and_attach: twe0 attach returned 12
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2
pci3: <PCI bus> on pcib3
twe0: <3ware Storage Controller driver ver. 1.40.01.001> port 0x2000-0x200f
mem
0xfd000000-0xfd7fffff,0xfd9f0000-0xfd9f000f irq 11 at device 1.0 on pci3
device_probe_and_attach: twe0 attach returned 12
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
twe0: <3ware Storage Controller driver ver. 1.40.01.001> port 0x2010-0x201f
mem
0xfc800000-0xfcffffff,0xfd9d0000-0xfd9d000f irq 11 at device 2.0 on pci3
device_probe_and_attach: twe0 attach returned 12
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ahd0: <Adaptec AIC7901A Ultra320 SCSI adapter> port
0x2800-0x28ff,0x2400-0x24ff
mem 0xfd9b0000-0xfd9b1fff irq 11 at device 3.0 on pci3
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
pci0: <UHCI USB controller> at 29.0 irq 5
pci0: <UHCI USB controller> at 29.1 irq 10
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib4
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1440-0x147f mem
0xfb780000-0xfb79fff
f,0xfb7a0000-0xfb7a0fff irq 11 at device 3.0 on pci1
fxp0: Ethernet address 00:03:47:30:f6:77
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0x1480-0x14bf
mem 0xfb740000-0xfb75ffff irq 11 at device 4.0 on pci1
em0: Speed:N/A Duplex:N/A
twe0: <3ware Storage Controller driver ver. 1.40.01.001> port 0x1400-0x140f
mem
0xf9800000-0xf9ffffff,0xfb7e0000-0xfb7e000f irq 9 at device 9.0 on pci1
device_probe_and_attach: twe0 attach returned 12
pci1: <ATI Mach64-GR graphics accelerator> at 12.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7
irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9800-0xcafff,0xc
b000-0xcc7ff,0xcc800-0xcdfff,0xce000-0xcf7ff,0xe4000-0xe7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.0.2.1.2.20040610180638.00b96788>