Date: Sat, 09 Dec 2000 00:45:38 -0600 From: Brett Rabe <brett@uswest.net> To: freebsd-mobile@FreeBSD.ORG Subject: Anyone gotten a Linksys PCMPC100 V3 working? Message-ID: <20001209064538.3465.qmail@phouka.oss.uswest.net>
next in thread | raw e-mail | index | archive | help
Hallo.
Has anyone gotten a PCMPC100 V3 card working? I see
that the PCMPC100 card has an entry in pccard.conf and
is reported to work, and I also see that the V2 card
is supposed to work (with the same entry...), but I
don't see anything about the V3 card on the mailing
lists.
"Dec 9 00:45:49 ash pccardd[N]: driver allocation failed for Linksys(...): Device not configured"
...
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: d4 0a ff
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 100nS, Memory block size = 8Kb, 2 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 41 00 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 49 01 ab c1
PCMCIA ID = 0x149, OEM ID = 0xc1ab
Tuple #4, code = 0x15 (Version 1 info), length = 57
000: 04 01 4c 69 6e 6b 73 79 73 00 45 74 68 65 72 46
010: 61 73 74 20 31 30 2f 31 30 30 20 50 43 20 43 61
020: 72 64 20 28 50 43 4d 50 43 31 30 30 20 56 33 29
030: 00 56 32 2e 30 00 20 00 ff
Version = 4.1, Manuf = [Linksys], card vers = [EtherFast 10/100 PC Card (PCMPC100 V3)]
Addit. info = [V2.0],[ ]
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 fd c0 03 01
Reg len = 2, config register addr = 0x3c0, last config = 0xfd
Registers: X-------
Tuple #6, code = 0x1b (Configuration entry), length = 7
000: fd 81 18 45 30 fc be
Config index = 0x3d(default)
Interface byte = 0x81 (I/O) wait signal supported
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes: Level
IRQs: 2 3 4 5 6 7 9 10 11 12 13 15
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 05 08 ca 60 00 03 1f
Config index = 0x5
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x20
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 0d 08 ca 60 20 03 1f
Config index = 0xd
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length = 0x20
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 15 08 ca 60 40 03 1f
Config index = 0x15
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 1d 08 ca 60 80 03 1f
Config index = 0x1d
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x380 block length = 0x20
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 25 08 ca 60 00 02 1f
Config index = 0x25
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x200 block length = 0x20
Tuple #12, code = 0x1b (Configuration entry), length = 7
000: 2d 08 ca 60 20 02 1f
Config index = 0x2d
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x220 block length = 0x20
Tuple #13, code = 0x1b (Configuration entry), length = 7
000: 35 08 ca 60 40 02 1f
Config index = 0x35
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x240 block length = 0x20
Tuple #14, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #15, code = 0x14 (No link), length = 0
Tuple #16, code = 0xff (Terminator), length = 0
2 slots found
... I think I really need to find the dongle for my good old
trusty 3C574..... :-)
Brett
---
brett@phouka.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001209064538.3465.qmail>