Date: Mon, 29 Oct 2007 11:44:52 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: "Arno J. Klaassen" <arno@heho.snv.jussieu.fr> Cc: current@freebsd.org Subject: Re: 2nd nfe interface not showing up on Tyan S2895 Message-ID: <20071029024452.GB32892@cdnetworks.co.kr> In-Reply-To: <wppryzxfg2.fsf@heho.snv.jussieu.fr> References: <wppryzxfg2.fsf@heho.snv.jussieu.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Oct 28, 2007 at 07:27:25PM +0100, Arno J. Klaassen wrote: > Hi, > > I'm playing with RELENG_7 on a spare S2895 I have around and > have difficulties with the ethernet interfaces : > > - nfe0 shows up and works OK under 1Gbps (at least for > buildworlds etc over NFS) but under 100Mbps it says : > > install kernel: nfe0: tx v2 error 0x6004 > install kernel: nfe0: tx v2 error 0x6204<UNDERFLOW> > Because developers don't know what exact meaning for Tx completion status word would be(Only NVIDIA knows that) nfe(4) just shows the possible error candidate. If you see the code you may notice no error recovery is attempted for the case. So I guess you can also ignore it unless the message contiously is printed on youe console while network activity is in progress. > - more serious, this board is supposed to have two of them > (enabled in BIOS as 'Slave Device') but only one of them > shows up at boot (and in pciconf -vl) > > According to the manual : "Two IEEE 802.3 Nvidia MAC 1000/100/10 > Ethernet (First from PRO 2200, Second from PRO 2050)" so apparently > not connected to the same chipset, and according to the > block diagram of MB-architecture, the "PRO 2050" should > be connected directly to the second CPU. > > Does anyone have a hint how to get that second interface at least > to show up? Thanx in advance and feel free to contact me for > more detailed info. > > Regards, > > Arno -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071029024452.GB32892>