Date: Wed, 30 Aug 1995 02:19:09 +0300 From: System daemons <daemon@crocodil.monolit.kiev.ua> Message-ID: <199508292319.CAA25554@crocodil.monolit.kiev.ua>
next in thread | raw e-mail | index | archive | help
[ I've sent this already, but to wrong address... second try should be ok. ]
Subject: SCSI CD Hitachi 1750S + PCI NCR cannot play sound (data ok)
Date: 25 Aug 1995 03:33:32 +0300
Organization: FARM Computing Association
Keywords: PCI NCR SCSI CD-ROM audio
I can use the drive in data mode (installed my system from it),
but when I run cdplay (or any X player, it doesn't matter),
I get the following diagnostics:
cd0(ncr0:2:0): ILLEGAL REQUEST asc:20,0 Invalid command operation code
cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2.
dmesg:
FreeBSD 2.0.5-RELEASE #0: Mon Aug 14 13:52:02 EET DST 1995
dk@dog.farm.org:/usr/src/sys/compile/FARM
CPU: i486DX (486-class CPU)
real memory = 7995392 (1952 pages)
avail memory = 6729728 (1643 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <8 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 15 on isa
ed0: address 00:40:33:2c:a6:13, type NE2000 (16 bit)
bpf: ed0 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16450
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x278-0x27f on isa
lpt2 not found at 0xffffffff
pca0 on isa
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Conner Peripherals 540MB - CFS540A>
wd0: 516MB (1058400 sectors), 1050 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the pci0 bus:
configuration mode 1 allows 32 devices.
pci0:5: vendor=0x1039, device=0x496, class=bridge [not supported]
vga0 <Display device> rev 0 on pci0:11
ncr0 <ncr 53c810 scsi> rev 2 int a irq 9 on pci0:13
reg20: virtual=0xf224b000 physical=0xf0800000 size=0x100
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl21 95/03/21)
ncr0 waiting for scsi devices to settle
(ncr0:2:0): "HITACHI CDR-1750S 0009" type 5 removable SCSI 1
cd0(ncr0:2:0): CD-ROM
cd0(ncr0:2:0): UNIT ATTENTION asc:28,0
cd0(ncr0:2:0): Not ready to ready transition, medium may have changed
cd present.[400000 x 2048 byte records]
pci0: uses 8388864 bytes of memory from f0000000 upto f08000ff.
pci0: uses 256 bytes of I/O space from 6000 upto 60ff.
bpf: lo0 attached
bpf: ppp0 attached
bpf: sl0 attached
cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2.
cd0(ncr0:2:0): ILLEGAL REQUEST asc:20,0 Invalid command operation code
cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2.
cd0(ncr0:2:0): ILLEGAL REQUEST asc:20,0 Invalid command operation code
cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2.
[same for each request]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508292319.CAA25554>