Date: Mon, 22 Jul 2002 13:15:25 -0700 (PDT) From: Jin Guojun (DSD staff) <jin@ncs.lbl.gov> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/40895: wierd kernel / device driver bug Message-ID: <200207222015.g6MKFPVW000355@ncs.lbl.gov>
next in thread | raw e-mail | index | archive | help
>Number: 40895
>Category: kern
>Synopsis: wierd kernel / device driver bug
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Jul 22 13:20:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Jin Guojun (DSD staff)
>Release: FreeBSD 4.6-RELEASE i386
>Organization:
>Environment:
FreeBSD 4.5 and 4.6-RELEASE
Tekram DC-390U3W SCSI controller
SysKonnect SK-9843 SX and SK-9844 GigE NIC
various 64-bit PCI motherboards
>Description:
(1) on Supermicro P4DPE motherboard
boot system in normal case (no "-v"), sk0-2 are configured
correctly. The DC-390U3W is not configured due to some CACHE
error. See dmesg-#1.
(2) On the same system, when try to boot system with "-v" to
see more information, then sk device is not probed at all,
and DC-390U3W had the same error.
After system booted up, do "ifconfig sk0", SYM driver is loaded,
then the sk driver. See dmesg-#2, which includes information of
"ifconfig sk0" after system is up.
Is this strange? Why SYM driver is invoked when probe sk device?
and why "-v" prohibits to load sk driver?
These boot messages contains a modified sym_hipd.c -- line 7053
is commented out. Notice that this modification does NOT affect
any behave above, but only makes sym driver going further to give
more information.
if (i>=SYM_SNOOP_TIMEOUT) {
printf ("CACHE TEST FAILED: timeout.\n");
/* return (0x20); */ /* Line 7053 */
};
(3) replace P4PDE motherboard with Tyan S2466 motherboard,
and without SysKonnect NIC,
boot process will hang on SCSI reset after SCSI is probed.
It looks like the /sys/dev/sym driver does not handle the
390U3 controller well. I would like to make this SCSI
controller to work. Please let me know if anything I can
probe further to provide information to fix the problem.
--------- dmesg_#1 ---
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #1: Mon Jul 22 12:17:20 PDT 2002
root@scm.lbl.gov:/usr/src/sys/compile/MinMax
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1996.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 1073217536 (1048064K bytes)
avail memory = 1040048128 (1015672K bytes)
Preloaded elf kernel "kernel" at 0xc0468000.
Preloaded elf module "if_sk.ko" at 0xc046809c.
md0: Malloc disk
Using $PIR table, 29 entries at 0xc00fddf0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
pci4: <PCI bus> on pcib4
pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci4
pci5: <PCI bus> on pcib5
sym0: <1010-33> port 0x3000-0x30ff mem 0xfc304000-0xfc305fff,0xfc308000-0xfc3083ff irq 11 at device 1.0 on pci5
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
CACHE TEST FAILED: timeout.
CACHE TEST FAILED: script execution failed.
start=3e3ae4fc, pc=3e3ae504, end=3e3ae51c
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
sym0: <1010-33> port 0x3400-0x34ff mem 0xfc306000-0xfc307fff,0xfc308400-0xfc3087ff irq 11 at device 1.1 on pci5
sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
CACHE TEST FAILED: timeout.
CACHE TEST FAILED: script execution failed.
start=3e3724fc, pc=3e372504, end=3e37251c
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
skc0: <SysKonnect Gigabit Ethernet> port 0x3800-0x38ff mem 0xfc300000-0xfc303fff irq 11 at device 3.0 on pci5
skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9844 SX dual link
sk0: <XaQti Corp. XMAC II> on skc0
sk0: Ethernet address: 00:00:5a:98:ea:24
miibus0: <MII bus> on sk0
xmphy0: <XaQti Corp. XMAC II gigabit interface> on miibus0
xmphy0: 1000baseSX, 1000baseSX-FDX, auto
sk1: <XaQti Corp. XMAC II> on skc0
sk1: Ethernet address: 00:00:5a:98:ea:25
miibus1: <MII bus> on sk1
xmphy1: <XaQti Corp. XMAC II gigabit interface> on miibus1
xmphy1: 1000baseSX, 1000baseSX-FDX, auto
pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci4
pci6: <PCI bus> on pcib6
skc1: <SysKonnect Gigabit Ethernet> port 0x4000-0x40ff mem 0xfc400000-0xfc403fff irq 11 at device 1.0 on pci6
skc1: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9843 SX
sk2: <XaQti Corp. XMAC II> on skc1
sk2: Ethernet address: 00:00:5a:98:4c:30
miibus2: <MII bus> on sk2
xmphy2: <XaQti Corp. XMAC II gigabit interface> on miibus2
xmphy2: 1000baseSX, 1000baseSX-FDX, auto
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x2040-0x205f irq 5 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci7: <PCI bus> on pcib7
pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem 0xfc520000-0xfc53ffff,0xfc501000-0xfc501fff irq 11 at device 2.0 on pci7
fxp0: Ethernet address 00:30:48:23:61:23
inphy0: <i82555 10/100 media interface> on miibus3
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x2060-0x206f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff,0xcd000-0xcdfff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
--------- dmesg_#2 ---
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Fri Jul 19 11:59:10 PDT 2002
root@scm.lbl.gov:/usr/src/sys/compile/MinMax
Calibrating clock(s) ... TSC clock: 1996826452 Hz, i8254 clock: 1193322 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium 4 (1996.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 1073217536 (1048064K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x00485000 - 0x3feeffff, 1067888640 bytes (260715 pages)
0x3ff00000 - 0x3ff77fff, 491520 bytes (120 pages)
avail memory = 1040089088 (1015712K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f66f0
bios32: Entry = 0xfd650 (c00fd650) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x225
pnpbios: Found PnP BIOS data at 0xc00f6750
pnpbios: Entry = f0000:9236 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6720
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=25408086)
Using $PIR table, 29 entries at 0xc00fddf0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x2540, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2541, revid=0x02
class=ff-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x2543, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=1
found-> vendor=0x8086, dev=0x2545, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=6 secondarybus=4
found-> vendor=0x8086, dev=0x2482, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 00002000, size 5
found-> vendor=0x8086, dev=0x2484, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[20]: type 1, range 32, base 00002020, size 5
found-> vendor=0x8086, dev=0x2487, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=5
map[20]: type 1, range 32, base 00002040, size 5
found-> vendor=0x8086, dev=0x244e, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=7 secondarybus=7
found-> vendor=0x8086, dev=0x2480, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248b, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00002060, size 4
found-> vendor=0x8086, dev=0x2483, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=0
map[20]: type 1, range 32, base 00001100, size 5
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
found-> vendor=0x8086, dev=0x1461, revid=0x03
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc100000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x8086, dev=0x1461, revid=0x03
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc101000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
found-> vendor=0x8086, dev=0x1461, revid=0x03
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc200000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=5 secondarybus=5
found-> vendor=0x8086, dev=0x1461, revid=0x03
class=08-00-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc201000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=6 secondarybus=6
pci4: <PCI bus> on pcib4
pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci4
found-> vendor=0x1000, dev=0x0020, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00003000, size 8
map[14]: type 1, range 64, base fc308000, size 10
map[1c]: type 1, range 64, base fc304000, size 13
found-> vendor=0x1000, dev=0x0020, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00003400, size 8
map[14]: type 1, range 64, base fc308400, size 10
map[1c]: type 1, range 64, base fc306000, size 13
found-> vendor=0x1148, dev=0x4300, revid=0x12
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fc300000, size 14
map[14]: type 1, range 32, base 00003800, size 8
pci5: <PCI bus> on pcib5
sym0: <1010-33> port 0x3000-0x30ff mem 0xfc304000-0xfc305fff,0xfc308000-0xfc3083ff irq 11 at device 1.0 on pci5
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/a0/01/00/04
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/01/08/04
CACHE TEST FAILED: timeout.
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
sym0: <1010-33> port 0x3400-0x34ff mem 0xfc306000-0xfc307fff,0xfc308400-0xfc3087ff irq 11 at device 1.1 on pci5
sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/a0/01/00/04
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/01/08/04
CACHE TEST FAILED: timeout.
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
pci5: <unknown card> (vendor=0x1148, dev=0x4300) at 3.0 irq 11
pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci4
found-> vendor=0x1148, dev=0x4300, revid=0x11
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fc400000, size 14
map[14]: type 1, range 32, base 00004000, size 8
pci6: <PCI bus> on pcib6
pci6: <unknown card> (vendor=0x1148, dev=0x4300) at 1.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x2040-0x205f irq 5 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 00005000, size 8
map[18]: type 1, range 32, base fc500000, size 12
found-> vendor=0x8086, dev=0x1229, revid=0x0d
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fc501000, size 12
map[14]: type 1, range 32, base 00005400, size 6
map[18]: type 1, range 32, base fc520000, size 17
pci7: <PCI bus> on pcib7
pci7: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 1.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem 0xfc520000-0xfc53ffff,0xfc501000-0xfc501fff irq 11 at device 2.0 on pci7
fxp0: using memory space register mapping
using shared irq11.
fxp0: Ethernet address 00:30:48:23:61:23
fxp0: PCI IDs: 8086 1229 8086 1050 000d
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x2060-0x206f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2060
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2068
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
ata-: ata0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff,0xcd000-0xcdfff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 03 70 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cs0 failed to probe at port 0x300-0x31f on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68cc60, tty 63009a, net 67089a
bpf: sl0 attached
bpf: faith0 attached
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <WDC WD800JB-00CRA1/17.07W17> ATA-5 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Mounting root from ufs:ad0s1a
ad0s1: type 0xa5, start 63, end = 12578894, size 12578832 : OK
ad0s2: type 0xa5, start 12578895, end = 156296384, size 143717490 : OK
start_init: trying /sbin/init
----- system is up without sk ----- then, try to load it
#ifconfig sk0
sym0: <1010-33> port 0x3000-0x30ff mem 0xfc304000-0xfc305fff,0xfc308000-0xfc3083ff irq 11 at device 1.0 on pci5
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/01/08/04
CACHE TEST FAILED: timeout.
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
sym0: <1010-33> port 0x3400-0x34ff mem 0xfc306000-0xfc307fff,0xfc308400-0xfc3087ff irq 11 at device 1.1 on pci5
sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/01/08/04
CACHE TEST FAILED: timeout.
sym0: CACHE INCORRECTLY CONFIGURED.
device_probe_and_attach: sym0 attach returned 6
skc0: <SysKonnect Gigabit Ethernet> port 0x3800-0x38ff mem 0xfc300000-0xfc303fff irq 11 at device 3.0 on pci5
skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9844 SX dual link
skc1: <SysKonnect Gigabit Ethernet> port 0x4000-0x40ff mem 0xfc400000-0xfc403fff irq 11 at device 1.0 on pci6
skc1: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9843 SX
sk0: <XaQti Corp. XMAC II> on skc0
sk0: Ethernet address: 00:00:5a:98:ea:24
bpf: sk0 attached
sk1: <XaQti Corp. XMAC II> on skc0
sk1: Ethernet address: 00:00:5a:98:ea:25
bpf: sk1 attached
sk2: <XaQti Corp. XMAC II> on skc1
sk2: Ethernet address: 00:00:5a:98:4c:30
bpf: sk2 attached
miibus1: <MII bus> on sk0
xmphy0: <XaQti Corp. XMAC II gigabit interface> on miibus1
xmphy0: 1000baseSX, 1000baseSX-FDX, auto
miibus2: <MII bus> on sk1
xmphy1: <XaQti Corp. XMAC II gigabit interface> on miibus2
xmphy1: 1000baseSX, 1000baseSX-FDX, auto
miibus3: <MII bus> on sk2
xmphy2: <XaQti Corp. XMAC II gigabit interface> on miibus3
xmphy2: 1000baseSX, 1000baseSX-FDX, auto
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207222015.g6MKFPVW000355>