Date: Fri, 1 Mar 2013 09:28:04 +0800 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: XiaoQI Ge <ghw@7axu.com> Cc: freebsd-arm@freebsd.org Subject: Re: I u-boot fails to compile Message-ID: <CAGtf9xO8NgYUqnDL6DQ%2BawTXsO2ucm2Sa_1ZYAn2r1-Zc6ba%2Bw@mail.gmail.com> In-Reply-To: <CAKrd9eX5CyjNDExQvd-4b3JhZSNtVoeneMiVgYU8nvem=6qHeA@mail.gmail.com> References: <CAKrd9eUVGuU=NuKfCP5d1uaTPC4XoMkjzn_AzcAqeh%2Bu2E9STw@mail.gmail.com> <512FD685.8070009@bluezbox.com> <CAKrd9eX5CyjNDExQvd-4b3JhZSNtVoeneMiVgYU8nvem=6qHeA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Mar 1, 2013 at 8:28 AM, XiaoQI Ge <ghw@7axu.com> wrote: > I compiled the file size of 22,016 Byte / occupied space of 24,576 Byte is > rather http://people.freebsd.org/ ~~ ganbold / cubieboard / sunxi-spl.bin > size and space are 20,480 Byte is not where Iwrong ah? I observed that in my side too, and I just decided to use prebuilt sunxi-spl.bin. Ganbold > > These files produced the SD card can not start > === > dd if = / dev / zero of = a10.img bs = 1m count = 1 > dd if = sunxi-spl.bin conv = notrunc of = a10.img bs = 1024 seek = 8 > dd if = u-boot.bin conv = notrunc of = a10.img bs = 1024 seek = 32 > dd if = a10.img of = $ {DEVNAME} bs = 1m > === > > === > Welcome to Ge, XiaoQI's Homepage! <https://www.7axu.com>; > Gtalk/E-Mail <ghw@7axu.com>:ghw@7axu.com > > > > 2013/3/1 Oleksandr Tymoshenko <gonzo@bluezbox.com> > >> On 2/28/2013 4:07 AM, XiaoQI Ge wrote: >> >>> I tried to compile U-BOOT (https://github.com/linux-**sunxi/u-boot-sunxi<https://github.com/linux-sunxi/u-boot-sunxi>; >>> ), >>> but failed, suggesting: >>> >>> gmake [1]: *** [u-boot] Segmentation fault: 11 >>> >>> I do not know how to solve. >>> >>> >> In addition to Tim's patches for libc and static you'll also need to use >> gsed instead of >> sed with later versions of u-boot repo. >> Install textproc/gsed and rename sed to gsed in helper.mk. >> I have patch for using user-defined sed name but haven't pushed it to >> upstream yet. >> > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xO8NgYUqnDL6DQ%2BawTXsO2ucm2Sa_1ZYAn2r1-Zc6ba%2Bw>