Date: Sun, 18 Jun 2000 12:28:28 -0400 From: shashi <shashi@shift-f1.com> To: freebsd-net@freebsd.org Subject: 4.0 and ppp not working? Message-ID: <20000618122828.A11420@Shift-F1.com>
next in thread | raw e-mail | index | archive | help
Hello, I am not sure exactly which list this belongs to, so I am posting it on net, isp and stable. Forgive me for the extra bandwidth used. I have been using FreeBSD for 3 years now, and touch wood, things have always been smooth enough. So I haven't made much use of the mailing lists. For the current issue I have spent over 5 hours in the archives with no success. I found similar situations but no answers to the problem, at least none that apply to my situation. Here is the description: 1. ppp has always worked for dialing out on previous versions, 2x, 3.2(?) 2. I installed 4.0 from CD 2 days back. I must say there are a few new things that I am not sure of that may have caused problem, maybe? e.g. in install it asked if this machine will be a leaf node. I answered it "NO". Also, is IPv6 or IPsec the cause of any problems? Meaning does that need different handling all over the network commands? 3. this is what I did: % cd /dev % ./MAKEDEV tun0 % cp /usr/share/examples/ppp/ppp.conf.sample /etc/ppp/ppp.conf ----- /etc/ppp/ppp.conf after modification: ---- ########################################################### default: set log Phase Chat LCP IPCP CCP tun command set device /dev/cuaa1 set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \ OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set redial 10 5 deny lqr set phone _PHONENUMBERHERE_ set login "ABORT NO\\sCARRIER TIMEOUT 5 ogin:--ogin: _USERID_ word: _PASSWORD_" set timeout 120 set ifaddr 10.0.0.1/0 delete ALL add default HISADDR pmdemand: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 delete ALL set redial 10 20 add default HISADDR enable dns ########################################################### % ppp -ddial pmdemand 4. The thing is the SAME file works on 3.2 with same modem, same jack, same isp. Now, first time, the modem dials, makes connection then it says "Warning: Chat script failed".A After that, I do pppctl and a "quit all", then retry by % ppp -ddial pmdemand and the modem doesn't even ring. and gives the same errors. Any help will be highly appreciated. I am using default kernel right now, and I need ppp to CVS to latest upgrade. Thanks, Shashi Here is ppp.log: ( I have replaced _USERID_, _PASSWORD_ and _PHONENUM_) Jun 18 11:20:44 ugrads ppp[806]: Phase: Using interface: tun0 Jun 18 11:20:44 ugrads ppp[806]: Phase: deflink: Created in closed state Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set device /dev/cuaa1 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set speed 115200 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set redial 10 5 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: deny lqr Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set phone _PHONE_NUM_ Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set login ABORT NO\sCARRIER TIMEOUT 5 ogin:--ogin: _USERID_ word: _PASSWORD_ Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set timeout 120 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set ifaddr 10.0.0.1/0 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: delete ALL Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: add default HISADDR Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: default: set server +3000 ******** Jun 18 11:20:44 ugrads ppp[806]: tun0: Phase: Listening at port 3000. Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: pmdemand: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: pmdemand: delete ALL Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: pmdemand: set redial 10 20 Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: pmdemand: add default HISADDR Jun 18 11:20:44 ugrads ppp[806]: tun0: Command: pmdemand: enable dns Jun 18 11:20:44 ugrads ppp[807]: tun0: Phase: PPP Started (ddial mode). Jun 18 11:20:44 ugrads ppp[807]: tun0: Phase: bundle: Establish Jun 18 11:20:44 ugrads ppp[807]: tun0: Phase: deflink: closed -> opening Jun 18 11:20:44 ugrads ppp[807]: tun0: Phase: deflink: Connected! Jun 18 11:20:44 ugrads ppp[807]: tun0: Phase: deflink: opening -> dial Jun 18 11:20:44 ugrads ppp[807]: tun0: Phase: Phone: _PHONE_NUM_ Jun 18 11:20:44 ugrads ppp[807]: tun0: Chat: Send: AT^M Jun 18 11:20:44 ugrads ppp[807]: tun0: Chat: Expect(5): OK Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Received: AT^M^M Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Received: OK^M Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Send: ATE1Q0^M Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Expect(5): OK Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Received: ATE1Q0^M^M Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Received: OK^M Jun 18 11:20:45 ugrads ppp[807]: tun0: Chat: Send: ATDT_PHONE_NUM_^M Jun 18 11:20:47 ugrads ppp[807]: tun0: Chat: Expect(40): CONNECT Jun 18 11:21:28 ugrads ppp[807]: tun0: Chat: Expect timeout Jun 18 11:21:28 ugrads ppp[807]: tun0: Warning: Chat script failed Jun 18 11:21:28 ugrads ppp[807]: tun0: Phase: deflink: dial -> hangup Jun 18 11:21:28 ugrads ppp[807]: tun0: Phase: deflink: Disconnected! Jun 18 11:21:28 ugrads ppp[807]: tun0: Phase: deflink: Connect time: 44 secs: 0 octets in, 0 octets out Jun 18 11:21:28 ugrads ppp[807]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Jun 18 11:21:28 2000 Jun 18 11:21:28 ugrads ppp[807]: tun0: Phase: deflink: hangup -> opening Jun 18 11:21:28 ugrads ppp[807]: tun0: Phase: deflink: Enter pause (10) for redialing. Jun 18 11:21:38 ugrads ppp[807]: tun0: Phase: deflink: Redial timer expired. Jun 18 11:21:38 ugrads ppp[807]: tun0: Phase: deflink: Connected! Jun 18 11:21:38 ugrads ppp[807]: tun0: Phase: deflink: opening -> dial Jun 18 11:21:38 ugrads ppp[807]: tun0: Phase: Phone: _PHONE_NUM_ Jun 18 11:21:38 ugrads ppp[807]: tun0: Chat: Send: AT^M Jun 18 11:21:38 ugrads ppp[807]: tun0: Chat: Expect(5): OK Jun 18 11:21:43 ugrads ppp[807]: tun0: Chat: Expect timeout Jun 18 11:21:43 ugrads ppp[807]: tun0: Chat: Send: AT^M Jun 18 11:21:43 ugrads ppp[807]: tun0: Chat: Expect(5): OK Jun 18 11:21:48 ugrads ppp[807]: tun0: Chat: Expect timeout Jun 18 11:21:48 ugrads ppp[807]: tun0: Warning: Chat script failed Jun 18 11:21:48 ugrads ppp[807]: tun0: Phase: deflink: dial -> hangup Jun 18 11:21:48 ugrads ppp[807]: tun0: Phase: deflink: Disconnected! Jun 18 11:21:48 ugrads ppp[807]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out Jun 18 11:21:48 ugrads ppp[807]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sun Jun 18 11:21:48 2000 Jun 18 11:21:48 ugrads ppp[807]: tun0: Phase: deflink: hangup -> opening Jun 18 11:21:48 ugrads ppp[807]: tun0: Phase: deflink: Enter pause (10) for redialing. Jun 18 11:21:58 ugrads ppp[807]: tun0: Phase: deflink: Redial timer expired. Jun 18 11:21:58 ugrads ppp[807]: tun0: Phase: deflink: Connected! Jun 18 11:21:58 ugrads ppp[807]: tun0: Phase: deflink: opening -> dial Jun 18 11:21:58 ugrads ppp[807]: tun0: Phase: Phone: _PHONE_NUM_ Jun 18 11:21:58 ugrads ppp[807]: tun0: Chat: Send: AT^M Jun 18 11:21:58 ugrads ppp[807]: tun0: Chat: Expect(5): OK ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000618122828.A11420>